Abstract:Water containing heavy metal ions can be extremely harmful to the environment and human body, thus the development of low-cost and high-efficient adsorbents has an exciting prospect. In this study, lignin/graphene aerogels modified with polydopamine and polyethyleneimine, respectively, were successfully prepared to remove Cr(VI) from aqueous waste. The physicochemical properties of graphene aerogels (GA), lignin/graphene aerogels (LGA), polydopamine-modified lignin/graphene aerogels (LGA@PDA), polyethyleneimine-modified lignin/graphene aerogels (LGA@PEI) were investigated using FT-IR, Raman spectroscopy , XRD , XPS, SEM-EDS, and BET analysis. The results demonstrate that adsorbents have a high specific surface area, an interconnected porous structure, and a large number of oxygen-containing groups, making them particularly favorable for heavy metal adsorption. The effects of GO/lignin ratio, surface modifiers, solution pH, contact time, initial concentration and temperature on the Cr(VI) removal were investigated and compared via batch experiments. Compared with GA (138.74 ± 3.93 mg/g), the adsorption capacity of LGA with GO/LA ratio 40:1 increased to 167.66 ± 4.75 mg/g. Furthermore, the maximum adsorption capacity of LGA@PEI and LGA@PDA rose up to 209.85 ± 3.25 mg/g and 240.39 ± 3.26 mg/mg, respectively. By simulating the experimental data with different kinetic models and isotherm models, the adsorption processes of different lignin-derived aerogels were further explored under various conditions. All types of aerogels fit well with the pseudo-second-order model and Langmuir model. In addition, the XPS results confirm that the chemical reduction of Cr(VI) to Cr(III) also plays a role in the removal of Cr(VI). The results demonstrated that the removal effect of lignin-derived aerogels on Cr(VI) was greatly improved through the multi-functionalized surface modification of LGA with PDA and PEI. Furthermore, the removal efficiency of LGA@PDA and LGA@PEI for Cr(VI) remained stable after repeated regeneration. Therefore, the results of this study indicate that LGA@PDA and LGA@PEI are promising Cr(VI) adsorbents for practical applications in wastewater treatment.

Cellulose-based aerogel beads for efficient adsorption- reduction- sequestration of Cr(VI)

Amine-functionalized cellulose nanofiber-sodium alginate-Fe(III) porous hollow beads for the efficient removal of Cr(VI)

Effective Removal of Cr (VI) from Aqueous Solution by Reinforced Sodium Alginate/polyethyleneimine/graphene Oxide Composite Aerogels.

Efficient removal of Cr(VI) from wastewater by ZnO-polyacrylic acid/cellulose fiber/polyethylene glycol hydrogel: Synergistic effect of adsorption and photocatalytic reduction

Shape recovery aerogels from wheat straw-based cellulose nanofibrils for dynamic removal of Cr (VI)

EDAC-modified chitosan/imidazolium-polysulfone composite beads for removal of Cr(VI) from aqueous solution

Construction of attapulgite decorated cetylpyridinium bromide/cellulose acetate composite beads for removal of Cr (VI) ions with emphasis on mechanistic insights

Chitosan/carbon dots modified cellulose nanofibrils/ZIF-8 gel bead: An effective and easily separable photocatalytic adsorbent for Cr(VI) removal

Adsorption of Cr(VI) using cellulose microsphere-based adsorbent prepared by radiation-induced grafting

Rapid immobilization of Cr(VI) from aqueous waste through multi-functionalized surface-modified lignin-based aerogels: Dynamic and mechanism analyses

Biomass polyamine-functionalized nanocellulose-loaded covalent organic framework to construct composite aerogels for highly efficient removal of Cr (VI) and methyl orange

Functional rGO aerogel as a potential adsorbent for removing hazardous hexavalent chromium: adsorption performance and mechanism

Enhancing Removal of Cr(VI), Pb2+, and Cu2+ from Aqueous Solutions Using Amino-Functionalized Cellulose Nanocrystal

One-step synthesis of nitrogen-functionalized graphene aerogel for efficient removal of hexavalent chromium in water

Synthesis of cationic biomass lignosulfonate hydrogel for the efficient adsorption of Cr(VI) in wastewater with low pH

Iron-Loaded Carbon Aerogels Derived from Bamboo Cellulose Fibers as Efficient Adsorbents for Cr(VI) Removal

Synthesis of Novel Aminated Cellulose Microsphere Adsorbent for Efficient Cr(VI) Removal

Preparation of an ionic liquid-based hydrogel with hyperbranched topology for efficient removal of Cr(VI)

The Preparation of a Lignosulfonate/Chitosan–Graphene Oxide Hydrogel Biosorbent to Effectively Remove Cr(VI) from Wastewater: Adsorption Performance and Mechanisms

Ultralight and Superelastic Nanofiber Aerogels with In-Situ Loaded Polypyrrole for High-Efficient Cr(VI) Adsorption

Enhanced removal of hexavalent chromium from aqueous solution by functional polymer-wrapped gamma-alumina composite adsorbent