Abstract:Mobile robotic drilling for flight control surface assembly at multiple stations demands high positioning accuracy of the equipped industrial robot. However, disturbances, arising from movement from station to station, significantly deteriorate the positioning accuracy. This paper proposes a novel in-process robot base frame calibration method with a 2D vision system. A proposal layout of flight control surface assembly, the developed mobile robotic drilling system, and the 2D vision system are first introduced. Then an iterative measurement scheme is proposed to eliminate measurement errors induced by non-perpendicularity and erroneous object distance during 2D vision-based positioning of preset reference holes. In order to obtain the third-dimension Cartesian coordinates of the reference holes, depth control with autofocus is achieved by using a new sharpness function. Based on the acquired Cartesian coordinates of the reference holes in the robot base frame, and their counterparts measured in advance in the world coordinate system, the description of the robot base frame with respect to the world coordinate system can be obtained with least-squares fitting. Numerical experiments show that depth control with autofocus contributes to enhanced accuracy of robot base frame calibration. Experiments performed on the developed mobile drilling system indicate that the maximum positioning error is about 0.6 mm with the proposed calibration method. Since position errors of drilled fastener holes will be further measured and compensated for based on the 2D vision system, the proposed in-process robot base frame calibration method is effective.

Home Position and Tool Coordinates Calibration for 6-DOF Robot Based on Fixed-point Constraint

A Robot Calibration Method Based on Joint Angle Division and an Artificial Neural Network

An Enhanced POE-Based Method with Identified Transmission Errors for Serial Robotic Kinematic Calibration.

Positioning accuracy improvement method of industrial robot based on laser tracking measurement

An Improved Kinematic Model for Serial Robot Calibration Based on Local POE Formula Using Position Measurement

A Hybrid Analytical and Data-driven Modeling Approach for Calibration of Heavy-duty Cartesian Robot

Calibration of 6-DOF Parallel Mechanism Using Joint Force Sensors

Robot Base Frame Calibration with a 2D Vision System for Mobile Robotic Drilling

Kinematic Calibration for Articulated Arm Coordinate Measuring Machines Base on Particle Swarm Optimization

Calibration Of A 6-Dof Industrial Robot Considering The Actual Mechanical Structures And Cnc System

Pose Error Compensation Based on Joint Space Division for 6-DOF Robot Manipulators

A point and distance constraint based 6R robot calibration method through machine vision

Experimental Analysis on the Effectiveness of Kinematic Error Compensation Methods for Serial Industrial Robots

A local POE-based self-calibration method using position and distance constraints for collaborative robots

A new calibration method for hybrid machine tools using virtual tool center point position constraint

Calibration control of robot vertical assembly

Research of Calibration Method for Industrial Robot Based on Error Model of Position

Simultaneous Calibration of Multicoordinates for a Dual-Robot System by Solving the AXB = YCZ Problem

Positioning error calibration of six-axis robot based on sub-identification space

Model-based kinematic and non-kinematic calibration of a 7R 6-DOF robot with non-spherical wrist

Simultaneous Calibration of the Hand-Eye, Flange-Tool and Robot-Robot Relationship in Dual-Robot Collaboration Systems