Abstract:Arsenic is a toxic contaminant that can be found in drinking water. In this study, the development of an efficient electrode as an electrochemical sensor to detect arsenic( V ) in drinking water is presented. The surface of ZnO nanorods (NRs) synthesized on a Ni-foam substrate was modified by depositing α-Fe 2 O 3 nanoparticles (NPs) to fabricate an electrode for the detection of arsenic( V ) contamination in drinking water. This electrode was synthesized through two separate growth steps: a hydrothermal (ZnO NRs) step followed by the dip-coating method (α-Fe 2 O 3 NPs). The dip-coating method was repeated multiple times, 2 times (ZNF-2), 3 times (ZNF-3) and 4 times (ZNF-4), in order to achieve a uniform coverage of the ZnO NR surface. The electrodes were characterized using XRD, XPS, SEM and UV-vis spectroscopy. The best efficiency among the α-Fe 2 O 3 NP-modified nanorod samples was observed for the 3-time dip-coated ZNF-3 sample, which presented a uniform and homogeneous morphology, as observed from the SEM images, accompanied with the highest oxidation current. The electrochemical performance of the sensor electrodes was tested for a wide range of arsenic( V ) concentrations from 0 to 50 ppb and was monitored using cyclic voltammetry. The results demonstrated a calibration plot that was linear over a concentration range of 0–50 ppb of arsenic( V ), and the regression equation extracted from the calibration curve was found to be y = 0.003 x − 0.6271 (with R 2 = 0.991). The limit of detection (LOD) and limit of quantification (LOQ) were found to be 4.12 ppb and 13.74 ppb, respectively, which are lower than the maximum allowed value recommended by the World Health Organization (WHO) for arsenic in drinking water. This reasonable performance of the ZnO NRs/Ni-foam/α-Fe 2 O 3 NP nanocomposite electrode can be further enhanced, and the electrode can be utilized for efficient arsenic( V ) detection in drinking water.

Nafion/platinum modified electrode-on-chip for the electrochemical detection of trace iron in natural water

Copper Nanoparticles Confined in a Silica Nanochannel Film for the Electrochemical Detection of Nitrate Ions in Water Samples

An Active-Conductive Layer Stacked Sensor Platform for Real-Time Detection of Heavy Metal Ions

Detection of Nitrite Based on Ni/Ag/MWNTs Modified Electrode

Low-Cost Synthesis of Carbon Nanodots from Natural Products Used As A Fluorescent Probe for the Detection of Ferrum(Iii) Ions in Lake Water

Sensitive electrochemical measurement of As (III) using Nafion modified platinum electrode via anode stripping voltammetry

Fabrication of an α-Fe2O3 NP-modified ZnO NRs/Ni-foam nanocomposite electrode for electrochemical detection of arsenic in drinking water

Nafion/graphite-bismuth nanoplate with a vibration unit for portable heavy metal ion detection

Water monitoring with an automated smart sensor supported with solar power for real-time and long range detection of ferrous iron

Extending Silver Nanowire Modified Electrodes to Industrial Zinc Electrolyte for Copper Ion Detection

Probe-assisted detection of Fe3+ ions in a multi-functionalized nanopore

A simple strategy for the detection of Pb(II) and Cu(II) by an electrochemical sensor based on Zn/Ni-ZIF-8/XC-72/Nafion hybrid materials

Highly Sensitive Detection of Iron Ions in Aqueous Solutions Using Fluorescent Chitosan Nanoparticles Functionalized by Rhodamine B

A sensitive electrochemical sensor based on Fe3O4 magnetic nanoparticles/chitosan/graphene composite for detection of Pb2+ in aqueous solutions

Simple, rapid, portable and quantitative sensing of Fe3+ ions via analyte-triggered redox reactions mediating Tyndall effect enhancement of Au nanoparticles

A sensitive and high-performance electrochemical detection of nitrite in water samples based on Sonochemical synthesized Strontium Ferrite Nanochain architectures

Colorimetric and visual sensing of ferrous ion by Fenton reaction-stimulated etching of triangular gold nanoplates

Adsorbent-Assisted In Situ Electrocatalysis: Highly Sensitive and Stable Electrochemical Sensor Based on AuNF/COF-SH/CNT Nanocomposites for the Determination of Trace Cu(II)

Sensitive Electrochemical Detection of Ammonia Nitrogen via a Platinum–Zinc Alloy Nanoflower-Modified Carbon Cloth Electrode

Colorimetric Detection of Iron (II) Using 4-Mercaptobenzoic Acid and 3,3′,5,5′-Tetramethylbenzidine Modified Silver Nanoparticles

Dye-sensitized lanthanide-doped upconversion nanoprobe for enhanced sensitive detection of Fe3+ in human serum and tap water