Abstract:Solution-processed semiconductors have opened promising avenues for next-generation semiconductor and optoelectronic industries. Colloidal quantum dots (QDs) as one of the most typical materials are widely utilized for the design and development of light-emitting diodes, photodetectors, and solar cells. Recently, an emerging process of PbS QD ink has been employed to attain world record power conversion efficiency by surface passivation using a PbI2 ligand to form PbI2–PbS and the process optimization in the field of photovoltaics. However, the bonding and debonding of the ligands on the surface of PbS QDs are dynamic reversible processes in an ink environment. The uncoordinated Pb2+ defects induced by unbonded PbS QDs serve as the recombination sites. Thus, the present ink process leaves much room for the enhancement by surface passivation of PbS QDs. Herein, we devise an efficient strategy with a supplementary phenethylammonium iodide (PEAI) ligand for the formation of the PEAI–PbS interface in PbS QD ink-processed solar cells. This newly developed method can not only improve the passivation on the QD surface by iodine ions but also simultaneously enhance the carrier collection efficiency by a graded energy alignment between PbI2–PbS and PEAI–PbS layers. The corresponding power conversion efficiency of the optimized device has significantly increased by approximately 20% more than the control device. As a result, such a robust and efficient method regarded as a strategic candidate can overcome the bottleneck of imperfect passivation caused by a large specific surface area and loose bonding ligands, eventually promoting the industrial application of QDs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c08135?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c08135</a>.Absorbance results, description for detailed testing conditions, TEM images of OA–PbS QDs, XPS spectra of QD films about I 3d signal, FTIR data for QD films, device performances of PbS QDs by different supplemental treatment condition (ligands/concentration/annealing temperature/immersing time/solvents), AFM images of control and PEAI-QD films, XRD of QD films, SEM image of control and PEAI-QD films, UPS of ZnO and EDT–PbS QD films, TA results of control and PEAI-QD films, EIS spectra of the photovoltaic devices, and device performance as a function of CQD film thickness (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c08135/suppl_file/am0c08135_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Efficient, Flexible, and Ultra‐Lightweight Inverted PbS Quantum Dots Solar Cells on All‐CVD‐Growth of Parylene/Graphene/oCVD PEDOT Substrate with High Power‐per‐Weight

Dual-interface modification effect of Carbon Quantum Dots on the performance of Polymer Solar Cells

Flexible and efficient perovskite quantum dot solar cells via hybrid interfacial architecture

Carbon Quantum Dot-Passivated Perovskite/Carbon Electrodes for Stable Solar Cells

Ambient Stable and Efficient Monolithic Tandem Perovskite/PbS Quantum Dots Solar Cells via Surface Passivation and Light Management Strategies

Stable and Highly Efficient PbS Quantum Dot Tandem Solar Cells Employing a Rationally Designed Recombination Layer

Graphene Quantum Dots Assisted Photovoltage and Efficiency Enhancement in Cdse Quantum Dot Sensitized Solar Cells

Low-Cost, Air-Processed Quantum Dot Solar Cells via Diffusion-Controlled Synthesis

CsPbI3-Perovskite Quantum Dot Solar Cells: Unlocking Their Potential through Improved Absorber Layer Characteristics and Reduced Defects

Green Synthesis of Eco-Friendly Graphene Quantum Dots for Highly Efficient Perovskite Solar Cells

Interfacial Heterojunction Enables High Efficient PbS Quantum Dot Solar Cells

PbSe Quantum Dot Solar Cells Based on Directly Synthesized Semiconductive Inks

Efficient Quantum Dot Infrared Photovoltaic with Enhanced Charge Extraction via Applying Gradient Electron Transport Layers

Scalable PbS Quantum Dot Solar Cell Production by Blade Coating from Stable Inks

Efficient and Stable PbS Quantum Dot Solar Cells by Triple-Cation Perovskite Passivation

Enhanced Passivation and Carrier Collection in Ink-Processed PbS Quantum Dot Solar Cells via a Supplementary Ligand Strategy

Over 15% Efficiency PbS Quantum‐Dot Solar Cells by Synergistic Effects of Three Interface Engineering: Reducing Nonradiative Recombination and Balancing Charge Carrier Extraction

Synergistic passivation and energy level alignment by graphene quantum dots for high performance inverted CsPbI3 perovskite solar cells

High‐Efficiency PbS Quantum‐Dot Solar Cells with Greatly Simplified Fabrication Processing via “Solvent‐Curing”

Efficient and highly light stable planar perovskite solar cells with graphene quantum dots doped PCBM electron transport layer

Efficient Near‐Infrared PbS Quantum Dot Solar Cells Employing Hydrogenated In2O3 Transparent Electrode