Abstract:Cathode materials play a crucial role in dye-sensitized solar cells (DSSCs). Herein we present the applications of graphene based composites, conductive polymers and metal selenides in DSSCs as the cathode. Monolayer of PDDA/graphene/PDDA/H2PtCl6 is fabricated on conductive glass using electrostatic layer-by-layer self-assembly technique, which is then converted to graphene/Pt monolayer for use as counter electrode in DSSC. As compared to the sputtered Pt counter electrode, the self-assembled monolayer reduces the Pt amount by about 1000-fold but exhibits comparable photovoltaic performance. Close-packed graphene suffers from a low surface area, which limits its electrocatalytic activity as the counter electrode in DSSCs. To solve this problem, we have synthesized a porous graphene/SiO2 nanocomposite converted from graphene oxide mixed with SiO2 nanoparticles through facile hydrazine hydrate reduction. Graphene and graphene/SiO2 films prepared by drop-casting the suspensions onto the conductive glass substrates at room temperature without heat treatment have been applied directly as cathodes in DSSCs. As compared to the nonporous graphene film, the porous graphene/SiO2 composite film demonstrates much better electrocatalytic performance for the reduction of triiodide in DSSCs due to the remarkably enhanced surface area. As a consequence, the incorporation of SiO2 nanoparticles in the graphene film improves fill factor and power conversion efficiency by 65% and 69%, respectively. Oriented polyaniline nanowires array has been successfully grown in situ on conductive glass substrates without templates and applied as the cathode of DSSCs mediated with a Co(bpy) 3+/2+ 3 (bpy = 2,2′-bipyridine) redox couple. As compared to the polyaniline film with a random network, the oriented polyaniline nanowires array exhibits much better electrocatalytic performance, which is even outperforming the typical Pt electrode in both electrocatalytic performance and electrochemical stability when exposed to the acetonitrile solution of Co(bpy) 3+/2+ 3 redox couple. We have also proposed a facile one-step low temperature hydrothermal approach for in-situ growth of metal selenides (Co Se and Ni 1 0.85 0.85Se) on conductive glass substrates. The as-prepared metal selenides on conductive substrates can be used directly as transparent cathodes for DSSCs without any post-treatments. It is found that graphene-like Co0.85Se exhibits higher electrocatalytic activity than Pt for the reduction of triiodide. As a consequence, the DSSC with Co0.85Se generates higher short-circuit photocurrent and power conversion efficiency (9.40%) than that with Pt. These findings provide new routes to fabrication of cheap and efficient counter electrodes for DSSCs.

Graphene-Au Film Synthesized from GrO in Au-Aquaeus Solution as Counter Electrode For DSSC Application

Facile Synthesis of Nitrogen-Doped Reduced Graphene Oxide As an Efficient Counter Electrode for Dye-Sensitized Solar Cells

Enhanced Performance of Dye Sensitized Solar Cells by Using a Reduced Graphene Oxide/tio 2 Blocking Layer in the Photoanode

Enhanced Performance of the Dye-Sensitized Solar Cells by the Introduction of Graphene Oxide into the TiO2 Photoanode

Enhanced Electrocatalytic Performance Of Graphene Via Incorporation Of Sio2 Nanoparticles For Dye-Sensitized Solar Cells

Controllable Electrochemical Synthesis of Reduced Graphene Oxide Thin-Film Constructed as Efficient Photoanode in Dye-Sensitized Solar Cells

CVD-graphene/graphene flakes dual-films as advanced DSSC counter electrodes

Binder-Free Graphene Organogels As Cost-Efficient Counter Electrodes for Dye-Sensitized Solar Cells

A Preliminary result on the rGO functionalization as counter-electrode in dye-sensitized solar cells (DSSC)

Functionalized Reduced Graphene Oxide Loaded Aligned Carbon Nanotube Layer Used As Counter Electrode for Dye-Sensitized Solar Cells.

Property Modulation of Graphene Oxide Incorporated with TiO2 for Dye-Sensitized Solar Cells

Efficient Electrocatalysts for Dye-Sensitized Solar Cells

Enhanced visible light harvesting in dye-sensitized solar cells through incorporation of solution-processable silver plasmons and anthracite-derived graphene quantum dots

Self-assembled monolayer of graphene/Pt as counter electrode for efficient dye-sensitized solar cell.

Enhancement of electro-optical properties of aluminum magnesium oxide thin films through controlled graphene oxide doping

Simple and Fast Microwave-Assisted Synthesis Methods of Nanocrystalline TiO and rGO Materials for Low-Cost Metal-Free DSSC Applications.

Synthesis of Flower-Like Graphene Doped Cobalt Oxide via Hydrothermal Method and Its Performance as Counter Electrode in Dye Sensitized Solar Cells Applications

Graphene-Based Material for Fabrication of Electrodes in Dye-Sensitized Solar Cells

An investigation on surface modified TiO2 incorporated with graphene oxide for dye-sensitized solar cell

Mn3O4/graphene composite as counter electrode in dye-sensitized solar cells

Graphene oxide sheet-polyaniline nanocomposite prepared through in-situ polymerization/deposition method for counter electrode of dye-sensitized solar cell