Abstract:Efficient and stable electrode materials are urgently required for wastewater treatment in the electrocatalytic degradation of toxic and refractory organic pollutants. Ti3+ self-doping black TiO2 nanotube arrays (Ti/B-TiO2-NTs) as an interlayer were used for preparing a novel PbO2 electrode via an electrochemical reduction technology, and a sodium dodecyl sulfate (SDS)-modified PbO2 catalytic layer was successfully achieved via an electrochemical deposition technology. The physicochemical characterization tests showed that the Ti/B-TiO2-NTs/PbO2-SDS electrodes have a denser surface and finer grain size with the introduction of Ti3+ in the interlayer of Ti/TiO2-NTs and the addition of SDS in the active layer of PbO2. The electrochemical characterization results showed that the Ti3+ self-doping black Ti/TiO2-NTs/PbO2-SDS electrode had higher oxygen evolution potential (2.11 V vs. SCE), higher electrode stability, smaller charge-transfer resistance (6.74 Ω cm−2), and higher hydroxyl radical production activity, leading to it possessing better electrocatalytic properties. The above results indicated that the physicochemical and electrochemical characterization of the PbO2 electrode were all enhanced significantly with the introduction of Ti3+ and SDS. Furthermore, the Ti/B-TiO2-NTs/PbO2-SDS electrodes displayed the best performance on the degradation of methylene blue (MB) in simulated wastewater via bulk electrolysis. The removal efficiency of MB and the chemical oxygen demand (COD) could reach about 99.7% and 80.6% under the optimal conditions after 120 min, respectively. The pseudo-first-order kinetic constant of the Ti/B-TiO2-NTs/PbO2-SDS electrode was 0.03956 min−1, which was approximately 3.18 times faster than that of the Ti/TiO2-NTs/PbO2 electrode (0.01254 min−1). In addition, the Ti/B-TiO2-NTs/PbO2-SDS electrodes showed excellent stability and reusability. The degradation mechanism of MB was explored via the experimental identification of intermediates. In summary, the Ti3+ self-doping black Ti/TiO2-NTs/PbO2-SDS electrode is a promising electrode in treating wastewater.

The spent FCC catalyst loaded with Sb-doped SnO2 and its application in electrocatalytic degradation of methylene blue

Preparation of TiO2@Sn(Sb)O2 core–shell composites and their applications for electrocatalytic degradation of methylene blue

Fabrication of SnO2/TiO2 composite by a chemical co-precipitation method for efficient electrocatalytic oxidation of methylene blue

Electrochemical degradation of methylene blue by Pb modified porous SnO 2 anode

Fenton-like Degradation of Methylene Blue Using Paper Mill Sludge-Derived Magnetically Separable Heterogeneous Catalyst: Characterization and Mechanism.

Synthesis of peroxymonosulfate composite catalyst (Fe0/Fe3O4/biochar) using waterworks sludge and walnut shell for degrading methylene blue

A facile electroless preparation of Cu, Sn and Sb oxides coated Ti electrode for electrocatalytic degradation of organic pollutants

MOF-derived Three-Dimensional Flower-Like FeCu@C Composite As an Efficient Fenton-like Catalyst for Sulfamethazine Degradation

Enhanced degradation of micropollutants over iron-based electro-Fenton catalyst: Cobalt as an electron modulator in mesochannels and mechanism insight

Doping Sb into CuFe2O4 Improved the Catalytic Performance in the Electrochemically Enhanced Homogeneous Peroxymonosulfate-Heterogeneous Catalytic System for the Degradation of Ciprofloxacin

Catalysts containing Fe and Mn from dewatered sludge showing enhanced electrocatalytic degradation of triclosan

Application of the synergistic Ti/SnO 2 –Sb–Cu anode and Ti/ZnO/CuO cathode in the electrochemical treatment of wastewater

Co3O4/CoO ceramic catalyst: Bisulfite assisted catalytic degradation of methylene blue

The electro-Fenton/sulfite process with Fe-Mn bimetallic catalyst for diclofenac degradation at neutral pH

Enhanced Removal of Dye from Wastewater by Fenton Process Activated by Core-Shell NiCo2O4@FePc Catalyst

Robust Self-Supported SnO2-Mn2O3@CC Electrode for Efficient Electrochemical Degradation of Cationic Blue X-GRRL Dye

Development of SDS-Modified PbO2 Anode Material Based on Ti3+ Self-Doping Black TiO2NTs Substrate as a Conductive Interlayer for Enhanced Electrocatalytic Oxidation of Methylene Blue

Enhancing the heterogeneous electro-Fenton degradation of methylene blue using sludge-derived biochar-loaded nano zero-valent iron

Degradation of sulfamethoxazole by cobalt-nickel powder composite catalyst coupled with peroxymonosulfate: Performance, degradation pathways and mechanistic consideration

Titanium Carbide Composite Hollow Cobalt Sulfide Heterojunction with Function of Promoting Electron Migration for Efficiency Photo-Assisted Electro-Fenton Cathode

A Simple Method for Preparing Sb2S3/short-cut Carbon Fiber Foam for the Electrocatalytic Degradation of Dyes