Abstract:Abstract. The geological disposal in deep bedrock repositories is the preferred option for the management of high-level radioactive waste. In some of these concepts, carbon steel is considered as potential canister material and bentonites are planned as backfill material to protect metal waste containers. Therefore, a 1D radial reactive transport model has been developed in order to better understand the processes occurring during the long-term iron–bentonite interaction. The conceptual model accounts for diffusion, chemistry of the porewater and aqueous complexation reactions, mineral dissolution/precipitation and absorption, at a constant temperature of 25 ∘C under anoxic conditions. The geometry of the axisymmetric model reflects the canister–bentonite interface and the bentonite. The primary phases considered are montmorillonitic smectite, quartz, muscovite, albite, illite, pyrite and calcite. We assume that carbon steel is composed only of iron. The potential secondary phases considered are from reported experiments, such as magnetite, nontronitic smectite, greenalite, cronstedtite and siderite. The numerical model results suggest that at the iron–bentonite interface, Fe is adsorbed at the smectite surface via ion exchange in the short term and it is consumed by formation of the secondary phases in the long term. Furthermore, calcite precipitates are due to cation exchange in the short term and due to montmorillonitic smectite dissolution in the long term. The numerical model predicts the precipitation of nontronitic smectite, magnetite and greenalite as corrosion products. Results further reveal a significant increase in pH in the long term, whereas dissolution/precipitation reactions result in limited variations of the porosity. Progressing bentonite dissolution owing to the rising pH and concomitantly increasing silicate concentrations in the porewater induce formation of Fe-silicates as corrosion products at the expense of magnetite. A sensitivity analysis has also been performed to study the effect of selected parameters, such as corrosion rate, diffusion coefficient and composition of the porewater, on the corrosion products. Overall, outcomes suggest that pH and concentration of dissolved Si play an important role in corrosion mechanisms. The predicted main secondary phases in the long term are Fe-silicate minerals. Thus, such phases deserve further attention as possible chemical barriers for radionuclide migration in the repository near-field.

Modeling microbial sulfate reduction and the consequences for corrosion of copper canisters

Reactive transport modelling of long-term interactions between iron and MX-80 bentonite

A Mathematical model of copper corrosion

Inhibition of cadmium releasing from sulfide tailings into the environment by carbonate-mineralized bacteria

Effect of Incorporation of Sulfation in Columnar Modeling of Oxidized Copper Minerals on Predictions of Leaching Kinetics

Microbial Sulfur Pathways and Outcomes in Tailings Impoundments: A Mesocosm Study

Impact of compacted bentonite microbial community on the clay mineralogy and copper canister corrosion: a multidisciplinary approach in view of a safe Deep Geological Repository of nuclear wastes

Sulfidation of Cd-Sch during the microbial sulfate reduction: Nanoscale redistribution of Cd

EIS study on aerobic corrosion of copper in ground water: influence of micro-organisms

Effect of Supporting Anion for Copper Corrosion in Gas Diffusion Microenvironments

A FEM model for simulating trenching process around a MnS inclusion embedded in stainless steel

Influence of sulfide concentration on the corrosion behavior of pure copper in synthetic seawater

Effect of waste rock particle size on acid mine drainage generation: Practical implications for reactive transport modeling

From Micro-Environments to Macroscopic Effects: How the Alkaline Hydrogen Evolution Reaction Drives Cu Cathodic Corrosion

Mesoscale numerical simulation on the deterioration of cement-based materials under external sulfate attack

Insights into Sulfur and Hydrogen Sulfide Induced Corrosion of Sintered Nanocopper Paste: A Combined Experimental and Ab Initio Study

Synergistic mechanism of physical chemistry and acid bacteria: Product evolution of sulphides during tunnel mining

Microbial influence and dynamics of metallurgical waste dissolution in a landfill and recovery context: A multi-phase experimental approach and geochemical model

Microbial responses to elevated temperature: Evaluating bentonite mineralogy and copper canister corrosion within the long-term stability of deep geological repositories of nuclear waste

Effect of Sulfide and Chloride Ions on Pitting Corrosion of Type 316 Austenitic Stainless Steel in Groundwater Conditions Using Response Surface Methodology

Dynamic modeling of anaerobic methane oxidation coupled to sulfate reduction: role of elemental sulfur as intermediate