Abstract:A trade-off inevitably exists between soot and NOx emissions in a traditional engine. The addition of an oxygen containing biofuel can decrease the soot emission but increase the NOx emission. Multi-injection strategy can be used to decrease the NOx emission. Therefore, both simulations and experimental tests were conducted to evaluate the influences of pre-injection on the combustion and emission characteristics of pure diesel (D100) and diesel/n-butanol (30% n-butanol and 70% diesel by volume, B30). The results showed that as the pre-injection interval decreased, the in-cylinder pressure peak increased, the pre-injection heat release ratio increased, and the brake-specific fuel consumption (BSFC) decreased. Only at a small pre-injection interval, the BSFC under pre injection condition was lower than that obtained using the single injection strategy. When the same pre-injection strategy was used, B30 had a higher BSFC and lower brake thermal efficiency than D100. The soot emission decreased with the increase in pre-injection interval but increased with the increase in pre-injection ratio. More soot was emitted using the pre-injection strategy than that using single injection strategy. B30 had a lower soot emission than D100 due to a longer ignition delay. As the pre-injection interval increased, the decreasing amplitude of NO production became smaller than the increasing amplitude of NO2 production, thus increasing the net NOx emission. As the pre-injection ratio increased, more CO was produced through the reaction paths CH2O -> HCO -> CO, whereas the transformation of CO to CO2 almost remained unchanged, thus increasing the net CO emission. The increase in pre-injection ratio inhibited the oxidation of CO to CO2 and thus increased the CO emission. The amount of unburned hydrocarbons increased with the increase in both pre-injection ratio and interval.

Effects of injection timing on combustion performance and emissions in a diesel engine burning biodiesel blended with methanol

Engine Performance and Emissions of A Compression Ignition Engine Operating on the Diesel-Methanol Blends

Experimental Study on the Influence of Injection Timing on Combustion and Emission of Biodiesel Engine Based on Mechanical Mechanics

Effects of Injection Timing and Pressure on Combustion and Emissions on an Engine Fueled with Diesel/Gasoline/n-Butanol Blends

Experimental Investigation on the Performance and Emissions of a Diesel Engine Fueled with Biodiesel Blended with Methanol

Effects of injection timing and injection pressure on performance and exhaust emissions of a common rail diesel engine fueled by various concentrations of fish-oil biodiesel blends

Effects of main injection timing of common rail fuel system on combustion and emissions of DMDF engine

Effect of Egr and Injection Timing on Combustion and Emission Characteristics of Split Injection Strategy Di-Diesel Engine Fueled with Biodiesel

Performance and Emissions of Engine Fueled with Biodiesel/Methanol Blends

Effects of Diesel Pre-Injection Time on Combustion Process and Emission Characteristics of Diesel/Methanol Dual Fuel Engine

Effects of Methanol to Diesel Ratio and Diesel Injection Timing on Combustion, Performance and Emissions of a Methanol Port Premixed Diesel Engine

Effects of Diesel Injection Timing and Methanol Substitution Ratio on Combustion and Exhaust Emission Characteristics of a Dual Fuel Compression Ignition Engine

Effects of diesel and methanol injection timing on combustion, performance, and emissions of a diesel engine fueled with directly injected methanol and pilot diesel

Influence of Post Injection on Emission Characteristics of a High-Pressure Common-Rail Diesel Engine Fueled with Biodiesel Blends

Research on the Influence of Injection Strategies on the In-Cylinder Combustion Process and Emissions of Methanol

Effect of Turbocharged Diesel Engine Operating Conditions on Intake Premixed Methanol Quantity and Performance

Effect of Injection Timing on Performance and Emissions of Di-Diesel Engine Fueled with Isopropanol

Experimental and Numerical Study of Pre-Injection Effects on Diesel-N-butanol Blends Combustion

Influence of Injection Timing on Performance and Exhaust Emission of CI Engine Fuelled with Butanol-Diesel Using a 1D GT-Power Model

Experimental and Simulation Investigation of the Combustion Characteristics and Emissions Using N-Butanol/biodiesel Dual-Fuel Injection on a Diesel Engine

Experimental Study on the Combustion Characteristics and Emissions of Biodiesel Fueled Compression Ignition Engines with Premixed Dimethoxymethane