Abstract:Plug flow attracts continuous interest due to its advantages of low particle attrition, low pipeline wear and low energy consumption. A novel non-mechanical draft tube type feeder (DTF) has been proposed in our previous work for vertical plug conveying of coarse particles. Detailed particle motion behaviors and plug formation mechanisms in the draft tube type feeder are investigated by the combined approach of Computational Fluid Dynamics and Discrete Element Method (CFD-DEM) in the present study. The CFD-DEM method based on local averaging of granular matter is used to deal with fluid cell sizes smaller than particle sizes under the specific conditions. The applicability of the model is verified by comparing the calculated results with the experimental results of vertical plug formation of 6mm glass beads in a draft tube type feeder, in terms of plug flow pattern, pressure drop and solid mass flow rate. Detailed analysis of the particle entrainment in feeder container, flow properties at riser inlet and natural plug formation in riser are then carried out. It is found that both gas and particle flows result in entrainment effect on particles, respectively, through fluid-particle and particle-particle interactions. The linear increase of solid mass flow rate with superficial gas velocity is closely related to the linear increase of particle vertical velocity at riser inlet. Plug formation is achieved in a natural way, which shows the features of self-organization phenomenon. Particle concentration is a key parameter in this self-organization process. This study provides some insights into the natural plug formation of coarse particles in a non-mechanical feeder. The model should be useful to study the gas-solid flow of coarse particles in a confined domain with complex geometry, where the fluid cell size may be smaller than the particle size.

Dust Suppression Analysis of a New Spiral Hopper Using CFD-DEM Simulations and Experiments

Hopper discharge of elongated particles of varying aspect ratio: Experiments and DEM simulations

Cfd-Dem Investigation of Particle Elutriation with Electrostatic Effects in Gas-Solid Fluidized Beds

DEM Investigation on Conveying of Non-Spherical Particles in a Screw Conveyor

Study of the Particle Separation Performance of a Dust-settling Hopper

Experimental and Cpfd Numerical Study on Hopper Discharge

Application of CPFD in hopper discharge of fine granular material

DEM Study on the Effects of Pellet Characteristics on Particle Flow in Rectangular Hopper

CFD–DEM Simulation of Pneumatic Conveying in a Horizontal Channel

Study on Dust Suppression of Air Curtain Soft-Sealing System of Grab Ship Unloader

Investigation of the Vibrating Feeding System for Sphericity Separation of Coated Fuel Particles Using DEM

CFD-DEM Modelling of Hydraulic Conveying of Solid Particles in a Vertical Pipe

Investigation on Vertical Plug Formation of Coarse Particles in a Non-Mechanical Feeder by CFD-DEM Coupling Method

Numerical investigation of the particle flow behaviors in a fluidized-bed drum by CFD-DEM

CFD-DEM Modeling of Rod-Like Particles in a Fluidized Bed with Complex Geometry

Study on a Semi-Resolved CFD-DEM Method for Rod-Like Particles in a Gas-Solid Fluidized Bed

An Experimentally Validated Coarse-Grain DEM Study of Monodisperse Granular Mixing

Study on the factors influencing the performance of dust collection hood of angle grinder based on CFD-DEM simulation

Research on the Dust Suppression Effect of Three Types of Baffles on the Particle Flow Horizontal Projectile Falling Process in Transverse Airflow

Computational Fluid Dynamics Analysis of Wet Dust Removal in High-Gravity Countercurrent Rotating Packed Bed

Discharge Characteristics of Binary Particles in a Rectangular Hopper with Inclined Bottom