Abstract:Abstract The Nikaitchuq project on Alaska's remote arctic North Slope incorporates intelligent oilfield technology in the wells and throughout the gathering system and processing facility. Temperature and pressure sensors, level indicators, and flow meters tied into a distributed control system (DCS) are instrumental in completing a comprehensive picture of daily operations and conditions and for allowing operators to make adjustments as events occur. The data from these sensors and meters is historized and streamed from the remote field location to the engineering office 850 miles south. Through the use of this technology, the producer company production team collaborated with a production chemicals provider to identify and trial a chemical solution to solve the operational challenge of bottle-necked production, consequently increasing production. Field data and trends definitively support the efficacy of the product in lowering backpressure on wells, allowing a substantial production gain. Backpressure due to production bottlenecking in the gathering lines inhibited production from wells. With limited resources for manually or operationally removing restrictions, identifying a chemical to decrease the pressure due to friction in the lines was the best prospective option. In many chemical trials, identifying an effective product and quantifying the benefit of the product is difficult. However, use of intelligent oilfield technology enabled each product's effect to be measured and quantified. Prior to the start of the trial, three different production chemicals were prescreened and selected for trial. Each chemical was applied for a set length of time while data was collected and analyzed. Data coming into the DCS in real time enabled the producer company production team to optimize the application rate of each product and determine efficacy and cost efficiency. The wells' bottomhole pressures, the gathering system pressures and temperatures, and the process facility's front-end exchanger differential pressures were all observed to directly assess the efficacy of each product. Furthermore, vessel levels, process temperatures, and sales oil BS&W were monitored to ensure process stability while each new product was introduced to the system. The trial results proved that the backpressure could be relieved chemically. Data collected during the trial allowed the producer company production team to identify one product that outperformed the other two. At optimal rates, Product A relieved 7 psi of backpressure, Product B reduced the back pressure by 35 psi, and Product C reduced the backpressure by 7 psi. Additionally, using the many pressure sensors throughout the gathering system and process, it was possible to identify the restrictive points across which the chemical lowered the differential pressure. Monitoring secondary effects allowed the trial to proceed with minimal negative effects to the overall process.

Surveillance System for Dehydration and Desalting Process Optimization by Chemical Mitigation for a Marine Terminal in Mexico

Simulation-Based Multiobjective Optimization Of The Product Separation Process Within An Mtp Plant

Smart Nanoparticles for Conformance Improvement in Waterflooding

Autonomous Corrosion and Scale Management in Electric Submersible Pump Wells

Improving Fluid Loss Control During Well Intervention; A Case Study on the Use of Innovative Salt System

Data-Monitoring Solution for Desalination Processes: Cooling Tower and Mechanical Vapor Compression Hybrid System

Response surface methodology for optimizing crude oil desalting unit performance in iraq

Digital Oil Field: Real Time pH Monitoring and Automatic Neutralization System Using Smart Phone/Watch/PC and Microcontroller in Hydrogen Sulfide Formations

Modeling and Optimization of Alkaline-Surfactant-polymer Flooding and Hybrid Enhanced Oil Recovery Processes

Molecular design targets and optimization of low-temperature thermal desalination systems

An affordable operational oil spill monitoring system in action: A diachronic multiplatform analysis of recent incidents in the southern Gulf of Mexico

Integrated Simulation-Optimization Approach for Real-Time Dynamic Modeling and Process Control of Surfactant-Enhanced Remediation at Petroleum-Contaminated Sites

Design of Extended Surfactant-Only EOR Formulations for an Ultrahigh Salinity Oil Field by Using Hydrophilic Lipophilic Deviation (HLD) Approach: from Laboratory Screening to Simulation

Fuzzy optimization for the remediation of saline oily wastewater through electrocoagulation: a multi-objective case analysis

Oil spill management to prevent desalination plant shutdown from the perspectives of offshore cleanup, seawater intake and onshore pretreatment

Designing an Efficient Surfactant–Polymer–Oil–Electrolyte System: A Multi-Objective Optimization Study

Application of surfactants for the resolution of emulsions and suspensions in slop oil storage tanks, cleaning, and final disposal

Utilizing Intelligent Oilfield Technology and Production Chemicals to Solve Operational Challenges and Increase Production

Water treatment technology performance for chemical enhanced oil recovery: modeling, simulation and optimization

Advancing Water Deoiling Efficiency in Petroleum Production: A Comprehensive Case Study of Hybrid Flotation Technology Integration

Integrated Digital Solution for Enhanced Oil Recovery Through Optimization of Injection and Production Networks