Abstract:The Savonius rotor has been attracting more and more attention in recent years owing to its appealing features, such as simplicity of the fabrication, cost-effectiveness in low wind speed areas and low noise levels. It can be used for lighting, ventilation, hydropower generation and irrigation. As a traditional single-stage two-blade Savonius rotor has two defects, researchers proposed the multi-stage two-blade Savonius rotor to overcome them. However, most of the previous studies on the multi-stage Savonius rotors focused on the comparison between one- and two-stage rotors or the effect of the aspect ratios. This paper is different from previous researches and focuses on the comparison between two-stage rotors through the wind tunnel test. It also studies the effect of the gap ratio (GR) and phase shift angle (PSA) on the performance of the two-stage rotors at different wind speeds. Results showed that the negative azimuth angle range was narrowed and the torque coefficient (CT) values were improved as GR and PSA increased. Hence, the two-stage rotor with larger GR and PSA can overcome the two defects of the single-stage rotor. In terms of the power coefficient (CP), the optimized performance was determined by the GRs, PSAs, and wind speeds. When the wind speed increased, the difference among CP curves of one tested rotor was reduced. Generally speaking, the rotors with GR = 1/6 exhibited the optimized performance compared with those with other GRs when the PSA = 0° and PSA = 45°. While keeping the PSA = 90°, the rotor with GR = 0 had a superior performance to the others when PSA = 90° at wind speed of 4 m/s. The rotor with GR = 1/3 gave the highest CP value of 0.303 in the vicinity of the tip speed ratio 0.9 at wind speed of 6 m/s. And the rotor with GR = 1/6 attained the best CP when the wind speeds were 8 m/s and 10 m/s.

Comparison of Various Blade Profiles in a Two-Blade Conventional Savonius Wind Turbine

Experimental Study of Two-Stage Savonius Rotors with Different Gap Ratios and Phase Shift Angles

An Experimental Study on Aerodynamic Performance of Spiral Savonius Wind Rotor

Optimization of the Power Coefficient of a Savonius Wind Turbine by Changing the Shape of Blades

Evolving a Novel Blade Shape of a Savonius Wind Rotor Using an Optimization Technique Coupled With Numerical Simulations and Wind Tunnel Tests

Numerical Investigation of Savonius Rotor Elliptical and the Design Modification on a Blade Shape

Enhancing Savonius Vertical Axis Wind Turbine Performance: A Comprehensive Approach with Numerical Analysis and Experimental Investigations

Effect of surface roughness and blade material on the performance of a stationary Savonius wind turbine under different operating conditions

Numerical investigation of wind-lens combinations for improving aerodynamic performance of an elliptical-bladed Savonius wind turbine

Computational fluid dynamics investigations over conventional and modified Savonius wind turbines

Evolution and Progress in the Development of Savonius Wind Turbine Rotor Blade Profiles and Shapes

On the application of semicircular and Bach-type blades in the internal Savonius rotor of a hybrid wind turbine system

Numerical Investigation of Hybrid Savonius-Darrieus Vertical Axis Wind Turbine at Low Wind Speeds

Two-stage Taguchi-based optimization on dynamically-vented blade flaps to enhance the rotor performance of a Savonius turbine

Aerodynamic performance and efficiency enhancement of a Savonius vertical axis wind turbine with Semi-Directional Curved Guide Vane, using CFD and optimization method

Role of optimization and soft-computing techniques in the design and development of futuristic Savonius wind turbine blades: A review

Performance enhancement of savonius hydrokinetic turbine using split airfoil blade: A numerical investigation

Study on Aerodynamic Characteristics of a Savonius Wind Turbine with a Modified Blade

Design Optimization of Savonius Wind Turbine Using CFD-Particle Swarm Optimization with Power Flow Validation Experimentally

Multi-objective Optimization of Savonius Wind Turbine

Numerical Study of Control Rod's Cross-Section Effects on the Aerodynamic Performance of Savonius Vertical Axis Wind Turbine with Various Installation Positions at Suction Side