Abstract:The Savonius rotor has been attracting more and more attention in recent years owing to its appealing features, such as simplicity of the fabrication, cost-effectiveness in low wind speed areas and low noise levels. It can be used for lighting, ventilation, hydropower generation and irrigation. As a traditional single-stage two-blade Savonius rotor has two defects, researchers proposed the multi-stage two-blade Savonius rotor to overcome them. However, most of the previous studies on the multi-stage Savonius rotors focused on the comparison between one- and two-stage rotors or the effect of the aspect ratios. This paper is different from previous researches and focuses on the comparison between two-stage rotors through the wind tunnel test. It also studies the effect of the gap ratio (GR) and phase shift angle (PSA) on the performance of the two-stage rotors at different wind speeds. Results showed that the negative azimuth angle range was narrowed and the torque coefficient (CT) values were improved as GR and PSA increased. Hence, the two-stage rotor with larger GR and PSA can overcome the two defects of the single-stage rotor. In terms of the power coefficient (CP), the optimized performance was determined by the GRs, PSAs, and wind speeds. When the wind speed increased, the difference among CP curves of one tested rotor was reduced. Generally speaking, the rotors with GR = 1/6 exhibited the optimized performance compared with those with other GRs when the PSA = 0° and PSA = 45°. While keeping the PSA = 90°, the rotor with GR = 0 had a superior performance to the others when PSA = 90° at wind speed of 4 m/s. The rotor with GR = 1/3 gave the highest CP value of 0.303 in the vicinity of the tip speed ratio 0.9 at wind speed of 6 m/s. And the rotor with GR = 1/6 attained the best CP when the wind speeds were 8 m/s and 10 m/s.

An Experimental Study on Aerodynamic Performance of Spiral Savonius Wind Rotor

Experimental Study of Two-Stage Savonius Rotors with Different Gap Ratios and Phase Shift Angles

Airfoil Parameterization Evaluation Based on a Modified PARASEC Method for a H-Darrious Rotor

Study on Aerodynamic Characteristics of a Savonius Wind Turbine with a Modified Blade

Numerical Investigation of Savonius Rotor Elliptical and the Design Modification on a Blade Shape

Numerical investigation of wind-lens combinations for improving aerodynamic performance of an elliptical-bladed Savonius wind turbine

Experimental and Numerical Study of the Aerodynamic Characteristics of an Archimedes Spiral Wind Turbine Blade

Archimedes Spiral Wind Turbine performance study using different aerofoiled blade profiles: Experimental and numerical analyses

Experimental and numerical investigations of the blade design effect on Archimedes Spiral Wind Turbine performance

Numerical Study of Aerodynamic Performance of a High Solidity H-type Wind Turbine

Computational fluid dynamics investigations over conventional and modified Savonius wind turbines

CFD study on the ability of a ventilated blade in improving the Savonius rotor performance

Design Optimization of Savonius Rotors: an Overview

Aerodynamic performance and efficiency enhancement of a Savonius vertical axis wind turbine with Semi-Directional Curved Guide Vane, using CFD and optimization method

Flow Dynamics and Performance Enhancement of Drag-Type Savonius Wind Turbine with a Novel Elliptic-Shaped Deflector

Analysis of Archimedes Spiral Wind Turbine Performance by Simulation and Field Test

Evolving a Novel Blade Shape of a Savonius Wind Rotor Using an Optimization Technique Coupled With Numerical Simulations and Wind Tunnel Tests

Wind tunnel and numerical study of a small vertical axis wind turbine

Dynamic Characteristics and Enhanced Performance of a Novel Wind Turbine Rotor Analyzed Via Experiments and Numerical Simulation

Numerical Study of Control Rod's Cross-Section Effects on the Aerodynamic Performance of Savonius Vertical Axis Wind Turbine with Various Installation Positions at Suction Side

Enhancing Savonius Vertical Axis Wind Turbine Performance: A Comprehensive Approach with Numerical Analysis and Experimental Investigations