Abstract:An advanced smart sensor network is essential to a combustion system, which favors in situ, locally placed, and low-cost gas sensors. However, most chemical/electrochemical sensors fail to work in a combustion boiler, due to demanding operation temperatures (> 1000 °C). This work, for the first time, reports a well-functioning mixed-potential type CO sensor at 1000–1200 °C using nickel oxide (NiO) as the sensing material on the yttrium-stabilized zirconium (YSZ) oxide electrolyte. The influences of feed flow rate, electrode thickness, and porosity on the sensor behavior were investigated and the developed mixed potential gas sensor delivered notable and fast responses to 1000 ppm CO in 3% O2: 109 mV @1000 °C, 40 mV @1100 °C, and 7 mV @1200 °C. The sensing mechanism was identified different from the common theory based on CO oxidation coupled with oxygen reduction. A new mechanism is attributed to the inverse reactions: CO reduction coupled with oxygen evolution. For the first time, an inversion temperature was found for the CO-NiO reaction. Below the inversion temperature, CO oxidation occurs as commonly presented. Above the inversion temperature, CO is electrochemically reduced over NiO into carbon and oxygen ions, evidenced by electrochemical and compositional characterizations. The results can complement CO sensing mechanisms for mixed potential sensors and further trigger more research efforts to expand the working temperature limit of mixed potential sensors for practical application in combustion control systems.Graphical abstractBelow the inversion temperature, CO oxidationoccurs. Above the inversion temperature, CO is electrochemically reduced overNiO into carbon and oxygen ions. The results can complement CO sensingmechanisms for mixed potential sensors.

High-temperature tolerant diamond diode for carbon monoxide gas detection

Carbon Monoxide Measurement at Elevated Temperature Based on Tunable Diode Laser Absorption Spectroscopy

Porous Capillary Tubing Waveguide for High-Temperature Carbon Monoxide Detection

Surface-sensitive Diamond Photonic Crystals for High-Performance Gas Detection.

Ultrahigh sensitive and selective room-temperature carbon monoxide gas sensor based on polypyrrole/titanium dioxide nanocomposite

Selective detection of trace carbon monoxide at room temperature based on CuO nanosheets exposed to (111) crystal facets

NiO-based sensor for in situ CO monitoring above 1000 °C: behavior and mechanism

Highly Sensitive Diethylamine Detection at Room Temperature Using g-C3N4 Nanosheets Decorated with CuO Hollow Polyhedral Structures

Porous Titania with Heavily Self-Doped Ti3+ for Specific Sensing of Co at Room Temperature

Chemiresistive Sensor for Enhanced CO 2 Gas Monitoring

Ammonia Gas Sensor Response of a Vertical Zinc Oxide Nanorod-Gold Junction Diode at Room Temperature

A Temperature-Modulated Gas Sensor Based on CdO-Decorated Porous ZnO Nanobelts for the Recognizable Detection of Ethanol, Propanol, and Isopropanol

High-performance gas sensors with temperature measurement

High temperature X-ray and γ-ray spectroscopy with a diamond detector

A highly sensitive and selective nitric oxide/butanone temperature-dependent sensor based on waste biomass-derived mesoporous SnO2 hierarchical microtubes

Sensitive Carbon Monoxide Detection Based on Light Induced Thermoelastic Spectroscopy with a Hollow Waveguide and 2.3 Μm Diode Laser

Enhanced Gas Sensing Performance of SnO2/α-MoO3 Heterostructure Nanobelts.

Gas sensor based on Ga2 O3 nanowires

Computational assisted tuning of Co-doped TiO2 nanoparticles for ammonia detection at room temperatures

A Carbon Monoxide Gas Sensor Based on an AlGaN/GaN Structure

Improved Gas Sensing Capabilities of MoS2/Diamond Heterostructures at Room Temperature