Abstract:This paper presents an experimental study on the effects of the Reynolds number (Resj = 300, 600, and 900) and porosity (ϕ = 20%–85%) on synthetic jet vortex rings impinging onto a porous wall. Laser-induced fluorescence and particle image velocimetry are used to acquire flow information qualitatively and quantitatively. When Resj is low (Resj = 300), ϕ plays a key role in determining the formation of transmitted vortex rings downstream. For the first time, a row of individual small-scale vortex rings that form at the lowest porosity (ϕ = 20%) have been observed in the synthetic jet/porous wall interaction. As Resj increases to 900, the triggered Kelvin–Helmholtz instability promotes the vorticity cancellation at a low porosity (ϕ = 30%), and thus contributes to the formation of a transmitted vortex ring. It is concluded that the vorticity cancellation is the dominant factor affecting the generation of a transmitted vortex ring. Time-averaged characteristics indicate that for a low Resj, the incoherence of the vortex ring is mainly due to the viscous effects. However, for a high Resj, it is the transition that leads to a significant enhancement in the turbulent kinetic energy. Measurements of flow macroscopic parameters show that the loss of the momentum flux exhibits a linear relationship with ϕ for all Resj, while the loss of the kinetic energy transport is nonlinearly dependent on ϕ. Incorporating ϕ, this study presents a more comprehensive similarity parameter, ϕln(Resj2<math> d h * 3</math>), to characterize the synthetic jet/porous wall interaction.

Flow transitions in collisions between vortex-rings and density interfaces

Flow transitions of head-on vortex ring collisions with contaminated air–water interfaces

Modification of Flow Transition for a Vortex Ring by a Bubble Released at the Axis

Reynolds Number Effect on Vortex Ring Colliding with a Solid Wall

Dynamics of the interaction of synthetic jet vortex rings with a stratified interface

Deformation and Splitting of a Vortex Ring along a Thin Plate

Instability and disintegration of vortex rings during head-on collisions and wall interactions

Characteristics of flow around an impulsively rotating square cylinder via lb-df/fd method

Vortex ring refraction at large Froude numbers

Understanding Vortex Ring Instability During Droplet Impact Onto Thin Liquid Films Using High Speed PIV

Numerical Investigation of the Interaction Between an Interface and a Decaying Lamb–Oseen Vortex

Ring Vortex Dynamics Following Jet Formation of a Bubble Expanding and Collapsing Close to a Flat Solid Boundary Visualized via Dye Advection in the Framework of OpenFOAM

Kinematics of vortex ring generated by a drop upon impacting a liquid pool

A large-eddy simulation study on vortex-ring collisions upon round cylinders

Vortex simulation of unsteady shear flow induced by a vortex ring

Experimental investigation on the impingement of synthetic jet vortex rings onto a porous wall

Flow pattern transition accompanied with sudden growth of flow resistance in two-dimensional curvilinear viscoelastic flows

Collision and reconnection of viscous elliptic vortex rings

Velocity gradient analysis of a head-on vortex ring collision

Numerical study of a vortex ring impacting a flat wall

Turbulent Structures and Characteristics of Flows Past a Vertical Surface-Piercing Finite Circular Cylinder