Abstract:Microwave absorption properties of thin composites containing frequency selective surfaces(FSS)embedded in magnetic absorbing material(MAM)are presented in this paper.The FSS is composed of a regular array of square loop elements and a low-loss dielectric flat as the substrate.The top and bottom magnetic absorbing materials are carbonyl iron composites with different electromagnetic parameters.It is difficult to obtain good microwave absorp-tion properties only using the conventional magnetic absorber without FSS embedded in a broadband frequency range.The thickness of the magnetic absorber will be too large,and subsequently the surface density of the absorber will be greatly increased,which will limit its application regions.Introducing FSS can enhance the microwave absorp-tion ability of magnetic composites,especially in the low frequency range,and hence broaden the absorption band as well as effectively reduce the thickness of the absorber.Under the condition of surface impedance matching,the ohmic dissipation originating from metal elements of FSS and the magnetic loss originating from the bottom layer are the main mechanism to absorb electromagnetic energy.In order to investigate the microwave absorption proper-ties of the composite structure,we built the model using the electromagnetic simulation software HFSS 15.0,and then continuously optimized the structural parameters based on the simulation results.The final simulation results show that the composite microwave absorber with the thickness of 2 mm has an operating bandwidth with the reflec-tivity below -10 dB in the frequency range of 3.4 G~9 GHz and -8 dB in the frequency range of 9 G~18 GHz. The absorber obtains -5.5 dB reflectivity at 2 GHz.Compared with the absorber without FSS inserted under the same condition,though the higher peak absorption could be achieved using the absorber without FSS,the microwave absorption properties become worse and worse,and hardly meet the requirement of broadband absorption.The composite microwave absorber with FSS inserted,which has a broad absorption band and excellent low-frequency absorption characteristics,has a wide application prospect.

Microwave absorbing properties of glass fiber/epoxy resin composites tailored with frequency selective surface based on nonwoven of carbon fibers metalized with nickel

Novel radar absorbing material using resistive frequency selective surface based polymer composites for enhanced broadband microwave absorption

Broad bandwidth of thin composite radar absorbing structures embedded with frequency selective surfaces

Microwave absorbing and mechanical properties of carbon fiber/bismaleimide composites imbedded with Fe@C/PEK-C nano-membranes

Design on the Microwave Absorber with Lattice of 3D Composite Element for X-band Application

Microwave Absorption of Structural Polymer Composites Containing Glass-Coated Amorphous Microwires

Microwave Properties of Metacomposites Containing Carbon Fibres and Ferromagnetic Microwires

High-efficiency and Wide-Bandwidth Microwave Absorbers Based on MoS2-coated Carbon Fiber

Carbon Fiber Assisted Glass Fabric Composite Materials for Broadband Radar Cross Section Reduction

Performance Assessment of Nanofiber Integrated Polymer Composite as Electromagnetic Wave Absorber

A Study of the Nanocomposite Sandwich Structures for Broadband Microwave Absorption and Flexural Strength

Metacomposites Containing Ferromagnetic Microwires

Carbon fibers embedded with FeIII-MOF-5-derived composites for enhanced microwave absorption

The microwave absorption properties variation with temperature of RF/SiO 2 and improved microwave absorption by periodic structure

High Content of Siliconized MWCNTs and Cobalt Nanowire with E-Glass/Kenaf Fibers as Promising Reinforcement for EMI Shielding Material

Study on Properties of Glass-Fiber-Fabric-Reinforced Microwave-Absorbing Composites

Broadband Composite Radar Absorbing Structures with Resistive Frequency Selective Surface: Optimal Design, Manufacturing and Characterization

Research on thin and broadband magnetic absorbing materials with embedded frequency selective surfaces

Microwave-absorbing honeycomb core structure with nickel-coated glass fabric prepared by electroless plating

Design, Modelling, and Manufacturing of Sandwich Radome Structure with Out-of-band Absorption and In-Band Transmission Performances

Design and preparation of an epoxy resin matrix composite structure with broadband wave-absorbing properties