Abstract:OBJECTIVE:Developments in digital technology have permitted researchers to study mandibular movements. Here, the accuracy of a real-time, computerized, binocular, three-dimensional (3D) trajectory-tracking device for recording functional mandibular movements was evaluated.METHODS:An occlusal splint without the occlusal region was created based on a plaster cast of the lower dentition. The splint was rigidly connected with a target on its labial side and seated on the cast. The cast was then rigidly attached to the stage of a high-precision triaxial electronic translator, which was used to move the target-cast-stage complex. Half-circular movements (5.00-mm radius) in three planes (XOY, XOZ, YOZ) and linear movements along the x-axis were performed at 5.00 mm/s. All trajectory points were recorded with the binocular 3D trajectory-tracking device and fitted to arcs or lines, respectively, with the Imageware software. To analyze the accuracy of the trajectory-tracking device, the mean distances between the trajectory points and the fitted arcs or lines were measured, and the mean differences between the lengths of the fitted arcs' radii and a set value (5.00 mm) were then calculated. A one-way analysis of variance was used to evaluate the spatial consistency of the recording accuracy in three different planes.RESULTS:The mean distances between the trajectory points and fitted arcs or lines were 0.076 ± 0.033 mm or 0.089 ± 0.014 mm. The mean difference between the lengths of the fitted arcs' radii and the set value (5.00 mm) was 0.025 ± 0.071 mm. A one-way ANOVA showed that the recording errors in three different planes were not statistically significant.CONCLUSION:These results suggest that the device can record certain movements at 5.00 mm/s, which is similar to the speed of functional mandibular movements. In addition, the recordings had an error of <0.1 mm and good spatial consistency. Thus, the device meets some of the requirements necessary for recording human mandibular movements.

Measuring the Accuracy of Inside-Out Tracking in XR Devices Using a High-Precision Robotic Arm

Positioning accuracy improvement method of industrial robot based on laser tracking measurement

Advancing Virtual Reality Interaction: A Ring-Shaped Controller and Pose Tracking

Evaluation of the Oculus Rift S tracking system in room scale virtual reality

Evaluating the precision of the HTC VIVE Ultimate Tracker with robotic and human movements under varied environmental conditions

Efficiently Improving and Quantifying Robot Accuracy In Situ

Robustness and static-positional accuracy of the SteamVR 1.0 virtual reality tracking system

Eye tracker accuracy: quantitative evaluation of the invisible eye center location

How Accurate is the Positioning in VR? Using Motion Capture and Robotics to Compare Positioning Capabilities of Popular VR Headsets

P‐58: Measurement of AR Displays in Positioning Accuracy

Improvement of Robot Accuracy with an Optical Tracking System

Measuring eye-tracking accuracy and its impact on usability in apple vision pro

Accuracy of a Real-Time, Computerized, Binocular, Three-Dimensional Trajectory-Tracking Device for Recording Functional Mandibular Movements.

The Accuracy and Precision of Position and Orientation Tracking in the HTC Vive Virtual Reality System for Scientific Research

Shoulder Range of Motion Measurement Using Inertial Measurement Unit-Validation with a Robot Arm

3-D Passive Scale Tracking Method for Measuring Motion Errors of Industrial Robots

A Study of Vicon System Positioning Performance

Dynamic Pose Tracking Performance Evaluation of HTC Vive Virtual Reality System

Simple and High‐Precision Hand–Eye Calibration for 3D Robot Measurement Systems

Inside-Out Accurate Head Tracking with Head-Mounted Augmented Reality Device

Measurement Accuracy of an Upper Limb Tracking System Based on Two Hillcrest Labs BNO080 IMU Sensors: An Environmental Assessment