Abstract:OBJECTIVE:To establish the workflow of determining the jaw position of repositioning splint with the aid of digital technique, and to evaluate the accuracy of this workflow and compare the accuracy of raising different vertical dimensions in vitro.METHODS:A volunteer was recruited. The data of full-arch scans, cone beam computed tomography (CBCT) image and ultrasonic jaw motion tracking of the volunteer were acquired. The full-arch scans were merged with the CBCT image, which were then matched to the jaw motion tracking reference system. The jaw position of repositioning splint was determined when the anterior teeth opening was 3 mm and the condyle was in centric relation of the fossa in the sagittal plane. A digital repositioning splint was designed in the software based on virtual articulator and fabricated with additive manufacturing technique. After the splint was tried in, another CBCT image was taken and a qualitative analysis was conducted to compare the position of condyle between these two CBCT images. In the in vitro study, standard dental plaster casts with resin ball markers attached to the base were mounted onto a fully adjustable articulator in the intercuspal position. The dental casts were scanned by an extraoral scanner to establish digital models. The ultrasonic jaw motion tracking device was used to obtain simulated jaw movements on the articulator, which was repeated for three times. The digital models and data of jaw movements were merged in one coordination with the aid of bite forks. The jaw position of repositioning splint was determined by adjusting data of jaw movements, each of which was used to determine three vertical jaw positions 4 mm, 5 mm, and 6 mm with the horizontal jaw position of protrusion 2 mm. The virtual articulators with differently adjusted jaw movements were applied in designing repositioning splints, and the final repositioning splints and virtual jaw relationships were exported in STL format. Then the repositioning splints were fabricated with additive manufacturing technique and tried in plaster casts on the mechanical articulator, which were scanned and the jaw relationships on the mechanical articulator were exported later. The virtual jaw relationships and scanned jaw relationships were registered according to lower models and displacement of upper models was calculated. Ball markers were fit to acquire the coordinates of centers and absolute difference values of centers along three coordinating axes X, Y, and Z were calculated. One-way analysis of variance was conducted using SPSS 18.0 software to compare deviations of the three different vertical jaw relationships in two-side test and the significance level was 0.05.RESULTS:With the aid of multi-source data fusion and individualized jaw motion, the clinical workflow of determining jaw position of repositioning splint was preliminarily established. The designed jaw position was realized on the right and the condyle was more inferior than the designed position on the left. Both displacement of the upper models and absolute difference values of centers showed no significant differences (P>0.05) in different vertical jaw dimensions. The displacement of the upper models was (0.25±0.04) mm. The absolute difference values of centers along the three coordinating axes X, Y, and Z were respectively (0.08±0.01) mm, (0.30±0.02) mm, and (0.21±0.04) mm.CONCLUSION:A novel method of determining the jaw position of repositioning splint with the aid of digital technique is established. It is proved to be feasible by try-in after multi-data fusion, computer-aided design and computer-aided manufacturing. As is shown in vitro, it is accurate to apply this method in adjusting jaw position. Further clinical trial will be designed to evaluate its clinical effect.

Accuracy of a Real-Time, Computerized, Binocular, Three-Dimensional Trajectory-Tracking Device for Recording Functional Mandibular Movements.

Evaluation of the Correctness of A 3d Recording Device for Mandibular Functional Movement in Laboratory

Accuracy of dental implant surgery with robotic position feedback and registration algorithm: An <i>in</i>-<i>vitro</i> study

A Method of Three-Dimensional Recording of Mandibular Movement Based on Two-Dimensional Image Feature Extraction.

Accuracy of a Novel Virtual Articulator for Recording Three-Dimensional Dentition

Digital Determination and Recording of Edentulous Maxillomandibular Relationship Using a Jaw Movement Tracking System

Accuracy of a new photometric jaw tracking system in the frontal plane at different recording distances: An in-vitro study

Accuracy of Recording Edentulous Arch Relations Using an Optical Jaw-Tracking System: an in Vitro Study

Investigation of the precision of a novel jaw tracking system in recording mandibular movements: A preliminary clinical study

Accuracy of Motion Trajectory Achieved with an Intraoral Scanner: An In Vitro Study with a Proof-of-Concept

[The Accuracy of Occlusal Simulation of Virtual Craniofacial Movement Simulation System].

Trueness Evaluation of Three Intraoral Scanners for the Recording of Maximal Intercuspal Position.

Comparative analysis of three jaw motion tracking systems: A study on precision and trueness

Three-dimensional Mandibular Motion Trajectory-Tracking System Based on BP Neural Network

Computer-monitored radionuclide tracking of three-dimensional mandibular movements. Part I: theoretical approach

An automatic tracking method to measure the mandibula movement during real time MRI

Developing a Mandibular Movement Simulation System

Accuracy of mandibular repositioning surgery using new technology: Computer-aided design and manufacturing customized surgical cutting guides and fixation plates

[Method and Accuracy of Determining the Jaw Position of Repositioning Splint with the Aid of Digital Technique].

Evaluating the Accuracy of Three-Dimensional Reconstruction of the Intercuspal Position for Dentition Casts Aided by a Mechanical Appliance

Recording and Transferring Head Positions to the Virtual Head Using A Multicamera System and Laser Level