Abstract:The ballistic response of armor has been widely used to evaluate its feasibility and advantages as a protective structure. To obtain the ballistic performance and ballistic limitations of composite armor, a type of ultra-high molecular weight polyethylene (UHMWPE) composite armor is designed, which is composed of UHMWPE laminates and steel face sheets of Q235. The total thickness of the armor is 53 mm, with an in-plane dimension of 300 mm × 300 mm. Then, an experimental study of the ballistic impact response of composite armor subject to a typical ogive-nose projectile was carried out. In the velocity range of 501.1 to 1026.1 m/s, the 14.5 mm caliber armor-piercing projectile could penetrate through the composite armor. At the velocity of 433.3 m/s, the A-P projectile was embedded in the armor, leaving a bulge mark on the back sheet. Therefore, 467.2 m/s is taken as the ballistic limit of the armor under the impact of the ogive-nose projectile. In addition, a corresponding numerical simulation model is also established to predict the ballistic limit of the projectile. The numerical predictions are consistent with the experimental results. The ballistic limit obtained from the numerical simulation results is 500 m/s, which is acceptable with a relative error of 7.02%. The failure mechanism of the composite armor is also obtained. Petaling is the main dominant failure mode for both face sheets, while delamination and shear failure dominate the penetration process of UHMWPE laminates. Finally, the perforation mechanism of composite armor under the impact of an A-P projectile is analyzed with theoretical models to predict the residual velocity, the work performed during the perforation, and the resisting stress of σs in the cavity-expansion model. The experimental and numerical simulation results can provide necessary data in the analysis of the composite structure's dynamic response under the impact of sharp head penetrators. The research results present the ballistic performance, failure mechanism, and ballistic limit of the composite armor under the impact of a typical ogive-nose projectile, which can be significant in the design of composite armor in the areas of ship shield, fortifications protection, and bulletproof structures against threats from sharp head penetrators.

Ballistic Resistance of Novel Amorphous-Alloy-Reinforced Perforated Armor

Study on Anti-Penetration Performance of Semi-Cylindrical Ceramic Composite Armor against 12.7 mm API Projectile

Experimental and Numerical Investigation on Ballistic Penetration Performance of TC4-Al3Ti Layered Composites by Hot Rolling

Research on structural design and anti-penetration performance of ceramic composite armor

Experimental and numerical investigation on the anti-penetration performance of metallic sandwich plates for marine applications

Numerical Study on the Perforation of Steel Plates by Multiple Projectiles

Research on anti-penetration performance of composite armor of steel/composite materials

Simulation of ballistic performance of a two-layered structure of nanostructured metal and ceramic

Effects of Target Thickness and Macroscopic Interface on the Ballistic Performance of Ti6Al4V Titanium Alloy

Ballistic testing and theoretical analysis for perforation mechanism of the fan casing and fragmentation of the released blade

Numerical investigation on dynamic damage behavior of a novel N-shaped perforated armor plate under ballistic impact

A Computational Analysis of the High-velocity Impact Performance of Lightweight 3D Hybrid Composite Armors

A Novel Multi-Scale Ceramic-Based Array (SiCb+B4Cp)/7075Al as Promising Materials for Armor Structure

A metal/UHMWPE/SiC multi-layered composite armor against ballistic impact of flat-nosed projectile

An investigation of the ballistic impact behavior of multi-layered armor structure

Ballistic Behavior of Oblique Ceramic Composite Structure against Long-Rod Tungsten Projectiles

Ballistic Performance of Polyurea-Reinforced Ceramic/Metal Armor Subjected to Projectile Impact

Ballistic Limit of UHMWPE Composite Armor under Impact of Ogive-Nose Projectile

Experimental and Numerical Investigation on the Perforation Resistance of Double-Layered Metal Shield under High-Velocity Impact of Armor-Piercing Projectiles

Design and Ballistic Performance of Hybrid Plates Manufactured from Aramid Composites for Developing Multilayered Armor Systems

Numerical simulation of the penetration resistance of ceramic composite armor with corrugated structure