Abstract:In this study, theoretical analysis, numerical simulation and field measurement were adopted to analyze the difficult problem of controlling the stability of surrounding rock in gently inclined and close-distance coal seam mining roadways. The results showed that: (1) According to the properties and stress environment of the roadway roof, to determine the specific spatial range of the original roof stage, transition stage and regeneration roof stage of the roadway, and corresponding to the distribution of plastic zones in the spatial stages, was an important basis for analyzing the deformation mechanism of the roadway and proposing a phased collaborative control plan. (2) Under the influence of mining, the plastic zone of the transportation roadway expanded violently by about 10 m ahead of the working face. Within the range of roadway passing the overlying goaf, the plastic zone of the surrounding rock between the layers runed through, especially extending to the roof and two shoulder corners of the roadway. The roof and two shoulder corners of the roadway became the key parts for the stability control of the surrounding rock. (3) The mechanical mechanism of asymmetric expansion of the plastic zone was obtained as follows: the range was determined by the magnitude of the deviatoric stress and the orientation was dominated by the direction of the principal stress. The combined effect of the magnitude of deviatoric stress and the angle of principal stress caused asymmetric expansion of the plastic zone. (4) A phased collaborative control scheme was proposed, and numerical simulation and industrial verification were carried out on the proposed scheme. The deformation of the surrounding rock of the roadway at the engineering site was less than 150 mm, and the control effect of the surrounding rock was good, ensuring the safe and efficient recovery of the fully mechanized mining face. The present study revealed the mechanical mechanism of failure and instability of the surrounding rock of the gently inclined close distance coal seam mining roadway and proposed a phased collaborative control scheme, which could provide valuable information for mining research.

Position optimisation for a roadway under small coal mines in same coal seam: a case study

Optimization of roadway layout in ultra-close coal seams: A case study

Study on failure mechanism and control of surrounding rock of inclined strata crossing roadway in deep coal mine

A study on the reasonable width of narrow coal pillars in the section of hard primary roof hewing along the air excavation roadway

Study on stress distribution law of surrounding rock of roadway under the goaf and mechanism of pressure relief and impact reduction

Failure mechanism and stability control of surrounding rock in mining roadway with gentle slope and close distance

Study on Surrounding Rock Deformation Mechanism and Control of Roadway with Large Section and Extra-Thick Top Coal

Stability Control of Deep Coal Roadway under the Pressure Relief Effect of Adjacent Roadway with Large Deformation: A Case Study

Study on small coal pillar in gob-side entry driving and control technology of the surrounding rock in a high-stress roadway

Study on Failure Mechanism and Control Technology of Roadway Surrounding Rock under Complex Occurrence Coal Seam

Theoretical determination method and field verification of the fracture position of the main roof of the gob-side coal-rock roadway in gently inclined coal seam

Numerical study on the dynamic pressure control for self-forming roadways using CHRCT in thin coal seams with thick and hard roofs

Reused roadway failure mechanism and control strategies: a case study of the Shuangliu Coal Mine, China

Stability Control of a Roadway Surrounding Rock during the Cutting and Pressure Relief of a Coal-Bearing Roof at a Shallow Mining Depth

Study on surrounding rock failure mechanism and rational coal pillar width of the gob‐side coal roadway under influence of intense dynamic pressure

Analysis of Surrounding Rock Control Technology and Its Application on a Dynamic Pressure Roadway in a Thick Coal Seam

Study on Failure Characteristics and Control Technology of Roadway Surrounding Rock under Repeated Mining in Close-Distance Coal Seam

Non-uniform failure and differential pressure relief technology of roadway under irregular goafs in deep close-distance coal seams

Support Control Design of Mining Roadway under Goaf of Close-Distance Coal Seam

Research on Theory and Technology of Floor Heave Control in Semicoal Rock Roadway: Taking Longhu Coal Mine in Qitaihe Mining Area as an Example

Research on Low-Density Cross-Border Support Technology for Large-Section Coal Roadway in Shallow-Buried Thick Coal Seam