Abstract:A high gas barrier performance should be ensured in case of biodegradable packing applications. However, the gas barrier properties of the biodegradable poly(lactic acid) (PLA) are not much effective. Nanocomposites can provide innovative solutions to enhance the barrier performance. In this study, different weight percentages of organically modified montmorillonite (OMMT) (0, 2, 4, 6, 8, and 10 wt %)-incorporated PLA/OMMT nanocomposites were prepared by melt mixing. Ethylene glycol diglycidyl ether (EGDE) was used to regulate the interlayer spacing of OMMT and increase the PLA crystallinity to further improve the gas barrier performance of the PLA/OMMT films. The crystallinity of PLA was significantly improved because EGDE-modified OMMT served as an efficient nucleating agent. The PLA/EGDE/OMMT films demonstrated a unique structure such that the adjacent OMMT layers were linked through the PLA crystals that serve as a bridge with respect to the spaces between the OMMT layers. The O<sub>2</sub> permeability of the PLA/EGDE4/OMMT-6 film decreased by approximately 79% when compared with that of the neat PLA film. X-ray diffraction and differential scanning calorimetry analyses denoted that the reduced oxygen permeability of the PLA/EGDE4/OMMT-6 film can be primarily attributed to the high crystallinity of the PLA matrix and the bridging effect of the PLA crystals between two adjacent layers. Based on the experimental results, the relation between the relative permeability and vol % OMMT is in good agreement with that of the predicted values obtained using the Bharadwaj model when <i>S</i> = 0. The added EGDE weakened the thermal stability and tensile strength, mainly because of degradation of the hydroxyl groups of EGDE formed by epoxy ring opening, and these hydroxyl groups can promote PLA matrix degradation. However, the practical application temperature of the packaging film is considerably lower than the thermal decomposition temperature; therefore, the reduction of the thermal decomposition temperature does not affect the use of the packaging film.This article has not yet been cited by other publications.

Packaging Film of PP/LDPE/PLA/Clay Composite: Physical, Barrier and Degradable Properties

Design of Novel PLA/OMMT Films with Improved Gas Barrier and Mechanical Properties by Intercalating OMMT Interlayer with High Gas Barrier Polymers

Improvement of the Gas Barrier Properties of PLA/OMMT Films by Regulating the Interlayer Spacing of OMMT and the Crystallinity of PLA

High-Barrier Poly(butylene Succinate-Co-terephthalate) Blend with Poly(lactic Acid) As Biodegradable Food Packaging Films

Design of novel Polylactide composite films with improved gas barrier and mechanical properties using epoxy chain extender‐grafted organic montmorillonite

The effect of different clay types on the barrier properties of PLA/PBAT/clay bio-nanocomposite packaging films

Study of Thermal, Mechanical and Barrier Properties of Biodegradable PLA/PBAT Films with Highly Oriented MMT

Mechanical, Barrier, and Thermal Properties of Poly(Lactic Acid)/Poly(Trimethylene Carbonate)/Talc Composite Films

Effect of Poly(propylene carbonate) on Properties of Polylactic Acid-Based Composite Films

New poly(lactic acid)-based nanocomposite films for food packaging applications

Preparation of Poly(Lactide)/Poly(Butylene Adipate-Co-Terephthalate) Blend Films Using A Solvent Casting Method and Their Food Packaging Application

Investigation of physical, thermal, mechanical and gas permeability properties of low‐density polyethylene/ poly(4‐methyl‐1‐pentene) blend films and their utilization for fresh‐cut fruit and vegetable packaging applications

Preparation And Characterization Of Poly(L-Lactide)/Poly(Epsilon-Caprolactone) Composite Films For Food Packaging Application

Mechanical and barrier properties of LLDPE/TPS/OMMT packaging film in the presence of POE-g-IA or POE-g-MA

Processability and performance property correlation for LDPE/PA6-based nanocomposite and its monolayer blown film for packaging application

Effect of molding on the structure and properties of poly(butylene adipate-co-terephthalate)/poly(propylene carbonate)/organically modified montmorillonite nanocomposites

High-Gas-Barrier and Biodegradable PPC-P/PBAT Composite Films Coated by Poly(vinyl Alcohol)/borax Complexes

Exploring the effects of montmorillonite and halloysite nanotubes on mechanical, optical and barrier properties of poly (butylene adipate‐co‐terephthalate) blown films: Implications for sustainable packaging and food storage

Mechanical Properties, Thermal Behavior, Miscibility and Light Stability of the Poly(butylene Adipate-Co-terephthalate)/poly(propylene Carbonate)/polylactide Mulch Films

Improvement of Poly(lactic acid)-Poly(hydroxy butyrate) Blend Properties for Use in Food Packaging: Processing, Structure Relationships

Preparation and property evaluation of poly(ε-caprolactone)/polylactic acid/perlite biodegradable composite film