Effect of rolling temperature on microstructure and mechanical properties of Ti/steel clad plates fabricated by cold spraying and hot-rolling

Zhipo Zhao,Junrong Tang,Naeem ul Haq Tariq,Housheng Liu,Hanhui Liu,Yupeng Ren,Min Tong,Lisong Yin,Hao Du,Jiqiang Wang,Tianying Xiong

DOI: https://doi.org/10.1016/j.msea.2020.139982

2020-09-01

Abstract:<p>The effect of rolling temperature on the interfacial microstructure and mechanical properties of Ti/steel clad plates, fabricated by a newly designed method (cold spraying and hot-rolling) was studied. For this purpose, three rolling temperatures (<em>i.e.</em> 850, 950, 1050 °C) were selected to completely understand the bonding mechanism at Ti/steel interface. The type of interfacial compounds and thickness of the diffusion layers were found to be the main factors controlling the mechanical properties of the Ti/steel clad plates. Results showed that the Ti/steel clad plate rolled at 850 °C exhibited metallurgical bonding due to the formation of a 250 nm thick TiC diffusion layer at the interface, and resulted in the best elongation. In contrast, the sample rolled at 950 °C developed a 400 nm thick diffusion layer which was composed of TiC and FeTi compounds, leading to the best tensile strength. When the rolling temperature was increased to 1050 °C, the thickness of the diffusion layer (composed of coarse TiC and FeTi phases) was sharply increased to 4 μm, and the sample displayed poor tensile strength and elongation.</p>