Abstract:The effect of a high pulsed magnetic field on the tensile properties and microstructure of 7055 alloy were investigated. In the tensile properties test, the pulsed magnetic field was applied to improve the tensile strength and elongation via the magnetoplasticity effect. The results show that when the magnetic induction intensity (B) is 3 T, the tensile strength and elongation arrives at the maximum synchronously, which has been enhanced by 7.9% and 20% compared to the relevant 576.5 MPa (σ b), 7.5% (δ) of the initial sample without magnetic field treatment. The high magnetic field takes effect by altering the spin state of free electrons stimulated between the dislocations and obstacles; afterwards, the structural state of the radical pair is converted from the singlet state with high bonding energy to the triplet state with low bonding energy. Under this condition, the dislocation mobility is enhanced and it becomes easier for a dislocation to surmount the obstacles. The residual stress in the sample is connected closely with the long distance stress generated from the dislocation behavior. At 3 T, the residual stress arrived at the minimum of 16 MPa. Moreover, in the presence of a magnetic field, the common η (MgZn2) in the grain boundary dissolved and moved to internal grains because of the concentration difference, which helped to enhance the tensile strength and toughness of the materials. Finally, the fracture morphology was analyzed by scanning electronic microscopy. The fracture characteristic matches with the plasticity property.

Effect of Pulsed Magnetic Field on the Residual Stress of Rolled Magnium Alloy AZ31 Sheet

Evaluation of Effect of Magnetostriction on Residual Stress Relief by Pulsed Magnetic Treatment

Experimental and Numerical Research on Process Formability in Magnetic Pulse Forming of AZ31 Magnesium Alloy Sheets

Residual Stress Reduction by Combined Treatment of Pulsed Magnetic Field and Pulsed Current

Effect of Pulsed Current on the Deformation Behavior of AZ31B Magnesium Alloy

An Experiment on Magnetic Pulse Uniaxial Tension of Az31 Magnesium Alloy Sheet at Room Temperature

Application of pulsed magnetic field treatment for residual stress reduction of welded structure

Orientation Effects in Pulsed Magnetic Field Treatment

Effect of electric pulse rolling on plastic forming ability of AZ91D magnesium alloy

Magnetostriction Varieties and Stress Relief Caused by Pulsed Magnetic Field

Formability of magnetic pulse uniaxial tension of AZ31magnesium alloy sheet

Residual Stress in Pulsed Dc Microarc Oxidation Treated Az31 Alloy

Plastic Deformation Caused by Pulsed Magnetic Treatment of Mid-Carbon Steel

Effect of electropulsing treatment on the recovery of AZ31B magnesium alloy

Effect of magnetic field direction during magnetic treatment to reduce residual welding stresses

Effect of a pulsed magnetic treatment on the dislocation substructure of a commercial high strength steel

Effect of Pulsed Magnetic Field on Microstructure and Mechanical Properties of 7050 Al Alloy After Two-Stage Aging

Influence of a high pulsed magnetic field on the tensile properties and phase transition of 7055 aluminum alloy

Magnetic Pulse Forming of AZ31 Magnesium Alloy Shell by Uniform Pressure Coil at Room Temperature

Study on the Relation of Magnatostriction and Residual Stress Relief in the Process of Magnetic Treatment

An investigation of electroplastic effect on formability of AZ31B sheet metal