Abstract:The development of Li-rich layer cathode materials has been limited by poor cycle, rate performance, phase transformation and voltage decay. To improve these properties, a facile and low-cost wet method is employed to fabricate Pr6O11 coating layer on Li[Li0.2Mn0.54Co0.13Ni0.13]O2 nanoparticles. The 3–6nm Pr6O11 coating layer is observed on the surface of Li[Li0.2Mn0.54Co0.13Ni0.13]O2 by HRTEM. Interestingly, HAADF-STEM and EDS analyses show that the transition metal ions and the praseodymium ions mutually infiltrate in the Pr6O11 coating layer and Li[Li0.2Mn0.54Co0.13Ni0.13]O2 nanoparticles during calcination. A combination of HAADF-STEM with EDS and XPS studies reveals that Pr6O11 coating layer is bridged to Li[Li0.2Mn0.54Co0.13Ni0.13]O2 nanoparticles by the chemical bonds of transition phase Li1.2MXPr1−xO2. XRD patterns show that all samples are indexed to the layered structure α-NaFeO2, but the lattice parameters are influenced lightly after Pr6O11 coating. HRTEM and SAED analyses elucidate that the super large Pr ions surface-doping and the Pr6O11 coating are verified to suppress the transformation of layer to spinel structure in the bulk nanoparticles after cycles. The sample coated with 3wt% Pr6O11 exhibits wonderful electrochemical performance with the first coulomb efficiency of 85.6%, the capacity retention ratio of 97.9% after 50 cycles and the discharge capacity of 162.2mAhg−1 at 5C. The resistant of charge transfer and the electrodes polarization are reduced by Pr6O11 coating according to EIS. Therefore, Pr6O11, which contains the super large Pr ions, plays two roles: the first one, it is coated on the Li[Li0.2Mn0.54Co0.13Ni0.13]O2 nanoparticles to optimize the environment of the interface reaction between electrodes and electrolyte; the other one, its Pr ions surface-doping stabilizes the structure in the superficial region of Li[Li0.2Mn0.54Co0.13Ni0.13]O2 nanoparticles and suppresses the voltage decay. The multifunctional Pr6O11 can play a significant role in accelerating development of new materials with excellent stabilization and high capacity.

Modification on the structural stability of LiNi0.8Co0.1Mn0.1O2 cathode materials via Pr-doping by the solid-state method

Preparation and Electrochemical Properties of Li[Ni1/3Co1/3Mn1−x/3Zrx/3]O2 Cathode Materials for Li-ion Batteries

Pr doped single-crystal LiNi0.5Mn0.3Co0.2O2 cathode enables high rate capability and cycle stability for lithium ion batteries

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Stabilizing the Structure and Suppressing the Voltage Decay of Li[Li0.2Mn0.54Co0.13Ni0.13]O2 Cathode Materials for Li-ion Batteries Via Multifunctional Pr Oxide Surface Modification

Improved Li-ion Diffusion and Stability of a LiNi0.5Mn1.5O4 Cathode Through in Situ Co-Doping with Dual-Metal Cations and Incorporation of a Superionic Conductor

Lattice Engineering to Refine Particles and Strengthen Bonds of the LiNi 0.9 Co 0.05 Mn 0.05 O 2 Cathode toward Efficient Lithium Ion Storage

Dual-modification of Gd2O3 on the high-voltage electrochemical properties of LiNi0.8Co0.1Mn0.1O2 cathode materials via the solid-state method

Exploring the synergistic effect of Li+ and Br− co-doping on improving the microstructural and electrochemical performances of LiNi0.5Mn1.5O4 cathode materials

Ni, Mo Co-doped Lithium Manganate with Significantly Enhanced Discharge Capacity and Cycling Stability

Preparation and Electrochemical Performance of Modified LiNi0.5Mn1.5O4Cathode Material for Lithium-ion Batteries

Effects of Al and Co doping on the structural stability and high temperature cycling performance of LiNi0.5Mn1.5O4 spinel cathode materials

Enhancement structural stability of LiNi0.8Co0.1Mn0.1O2 via S2− doping combine with Li2SO4 coating co-modification

Surface Heterostructure Induced by PrPO4 Modification in Li1.2[Mn0.54Ni0.13Co0.13]O2 Cathode Material for High-Performance Lithium-Ion Batteries with Mitigating Voltage Decay.

Boosting cell performance of LiNi0.8Co0.1Mn0.1O2 cathode material via structure design

Effect of Mo Doping on the Structure and Electrochemical Performances of LiNi0.6Co0.2Mn0.2O2 Cathode Material at High Cut-off Voltage

Effect of the PrPO4 modification on the structure and electrochemical performance of LiCoO2

Enhancing electrochemical performance and structural stability of LiNi0.5Mn1.5O4 cathode material for rechargeable lithium-ion batteries by boron doping

Improving the electrochemical performance of single crystal LiNi0.5Mn1.5O4 cathode materials by Y–Ti doping and unannealing process

Integrated co-modification of PO43− polyanion doping and Li2TiO3 coating for Ni-rich layered LiNi0.6Co0.2Mn0.2O2 cathode material of Lithium-Ion batteries

LiNbO3 Coating and F- Doping Stabilize the Crystal Structure and Ameliorate the Interface of LiNi0.88Co0.06Mn0.03Al0.03O2 to Improve the Electrochemical Properties and Safety Capability