Abstract:The aerospace and automotive industries find that relying solely on the intrinsic resistance of alloys is inadequate to safeguard aircraft and automotive structural components from harsh environmental conditions. While it is difficult to attribute accidents exclusively to coating failure due to the involvement of multiple factors, there are instances where defects in the coating initiate a wear or degradation process, leading to premature and unplanned structural failures. Metallic coatings have been introduced to protect the aircraft mainly from wear due to the extreme temperatures and moisture they get exposed to during their service life. The bare metallic coatings have a limited lifespan and need to be replaced frequently. Herein, the strength and wear resistance of zinc (Zn) coating is enhanced using varying concentrations of diamond particles as an additive in the Zn matrix (Zn-D). The dispersion strengthening mechanism is attributed to the high hardness (70 HRC), reduced friction-of-coefficient (0.21) and dissipation energy (4.6 × 10-4 J) of electrodeposited in Zn-D7.5 (7.5 g/l of diamond concentration) composite coating. Moreover, enhanced wear resistance with minimum wear volume (1.12 × 10-3 mm3) and wear rate (1.25 × 10-3 mm3/Nm) of Zn-D7.5 composite coating offered perfect blending of diamond with Zn. The improved hardness and wear resistance for Zn-D7.5 (optimum 7.5 g/l diamond concentration) is due to the steadiness between well-dispersed diamonds in Zn and enrichment in load-bearing ability due to the incorporation of diamond particles. Electronic structure calculations on the zinc-diamond composite models (two configurations adopted) have been performed using the density functional theory (DFT) approach and the in-silico studies appeared to facilitate meaningful and evocative outcomes. The Zn-doped diamond (C10@Zn) without hydrogen (H) atoms (binding energy: 418 kcal/mol, i.e. showing endothermic reaction and thermodynamically not favourable) was detected to be more stable than the Zn-doped diamond (C10H16@Zn) consisting of hydrogen (H) atoms (binding energy: -33.3 kcal/mol, i.e. showing exothermic reaction and thermodynamically preferable). Thus, the composite coating of zinc and diamond can be a pioneering candidate for the aerospace and automotive industries.

Corrosion and Wear Properties of Zn-Based Composite Coatings

Tribological and Anticorrosion Performance of Electroplated Zinc Based Nanocomposite Coatings

Mechanical and Tribological Evaluation of Zinc/Zinc-Zirconia Composite Coatings on Ti6Al4V Alloys

Comparative Studies of Microstructural, Tribological and Corrosion Properties of Plated Zn and Zn-alloy Coatings

Enhanced mechanical properties and corrosion resistance of electro-deposited NiCoP composite coatings with ZrB2 particle addition

Corrosion-Resistive ZrO2 Barrier Films on Selected Zn-Based Alloys

Tribological and Corrosion Behaviors of Zr-doped Graphite-Like Carbon Nanostructured Coatings on Ti6Al4V Alloy

Design, Manufacturing, Microstructure, and Surface Properties of Brazed Co-Based Composite Coatings Reinforced with Tungsten Carbide Particles

Dry sliding wear behavior of hard-chrome and zinc-phosphate conversion coatings on steel substrates

Fabrication of Pb-Co-ZrO 2 nanocomposite coatings and correlation of corrosion mechanisms with electronic work functions

Corrosion and wear resistance behaviors of electroless Ni–Cu–P–TiN composite coating

Nanodiamond-Structured Zinc Composite Coatings with Strong Bonding and High Load-bearing Capacity

Microstructure and properties of Co based laser cladded composite coatings

Tribocorrosion Behaviours of Cold-Sprayed Diamond–cu Composite Coatings in Artificial Sea Water

Study on the Tribology Properties of the Particles/Cu Composite Coatings

Fabrication and wear property of NiCo coated ZrO2–Al2O3 ceramic particles reinforced high manganese steel-based composites

Features of the Application of Coatings Based on the ZrN System to Increase Resistance to Mechanical Wear and Corrosion of Titanium Alloy Products

Corrosion Behavior and Biocompatibility of Diamond-like Carbon-Coated Zinc: An In Vitro Study

Corrosion Behavior and Mechanical Properties of Zn–Ti Alloys as Biodegradable Materials

Corrosion and Wear Properties of Cr Coating and ZrO2/Cr Bilayer Coating on Zr-4 Alloy

Corrosion and tribocorrosion resistance of MAO-based composite coating on AZ31 magnesium alloy