Abstract:3D printing of continuous carbon fiber reinforced thermoplastic (CFRTP) composites is increasingly under development owing to its unparalleled flexibility of manufacturing 3D structures over traditional manufacturing processes. However, key issues, such as weak interlayer bonding, voids between beads and layers, and low volume ratio of carbon fiber, in the mainstream fuse deposition modeling (FDM) and extrusion suppress the applications of these techniques in mission‐critical applications, such as aerospace and defense. This communication reports a novel approach, inspired by laminated object manufacturing (LOM), for 3D printing of continuous CFRTPs using prepreg composite sheets. The prepreg sheets are successively cut based on the sliced CAD geometry, and then bonded layer upon layer using a CO2 laser beam and a consolidation roller system. The void content is low by computed tomography scans and interlaminar bonding strength is as high as conventional autoclave method by lap shear strength tests. The excellent interfacial bonding strength and high volume ratio of continuous carbon fiber contribute to the highest reported tensile strength (668.3 MPa) and flexural strength (591.16 MPa) to date, for all 3D printed CFRTPs. Moreover, the proposed technique also enables controlling the alignment of carbon fiber in printed layers. CFRTPs with unidirectional [0°]s, cross‐ply [0/90°]s, and [0/‐45/0/45°]s fiber reinforcement are produced and evaluated for mechanical properties. The proposed 3D printing method is broadly beneficial for industries requiring high performance and lightweight structural materials with complex geometries. A mechanism to 3D print ultrahigh strength carbon fiber reinforced polymer (CFRP) composites capable of achieving aligned continuous carbon fiber reinforcement is presented. The mechanical properties are superior to the existing 3D printed CFRP materials due to an excellent interfacial bonding and minimal void content. During this laser assisted 3D printing technique, temperature at the material interface reaches well above the matrix melting point.

Ultrafast printing of continuous fiber‐reinforced thermoplastic composites with ultrahigh mechanical performance by ultrasonic‐assisted laminated object manufacturing

3D Printing of Ultrahigh Strength Continuous Carbon Fiber Composites

Robot-assisted laser additive manufacturing for high-strength/low-porosity continuous fiber-reinforced thermoplastic composites

3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance

Ultrasound-assisted 3D printing of continuous fiber-reinforced thermoplastic (FRTP) composites

Evaluation of material extrusion and laser-assisted in situ consolidation integrated additive manufacturing for multi-material components

Fabrication and Formability of Continuous Carbon Fiber Reinforced Resin Matrix Composites Using Additive Manufacturing

Fused-Deposition Modeling 3D Printing of Short-Cut Carbon-Fiber-Reinforced PA6 Composites for Strengthening, Toughening, and Light Weighting

Additive manufacturing of high‐strength polyamide 6 composites reinforced with continuous carbon fiber prepreg

Dynamic Capillary-Driven Additive Manufacturing of Continuous Carbon Fiber Composite

Enhancing the Longitudinal Compressive Strength of Freeform 3D-Printed Continuous Carbon Fiber-Reinforced Polymer Composite Laminate Using Magnetic Compaction Force and Nanofiber Z-Threads

Exceptional mechanical performance by spatial printing with continuous fiber: Curved slicing, toolpath generation and physical verification

A Comparative Study of Pellet-Based Extrusion Deposition of Short, Long, and Continuous Carbon Fiber-Reinforced Polymer Composites for Large-Scale Additive Manufacturing

Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites

3D Printing Technology for Short-continuous Carbon Fiber Synchronous Reinforced Thermoplastic Composites: A Comparison between Towpreg Extrusion and In Situ Impregnation Processes

Three-Dimensional Printing of Continuous Flax Fiber-Reinforced Thermoplastic Composites by Five-Axis Machine

Research Status of and Prospects for 3D Printing for Continuous Fiber-Reinforced Thermoplastic Composites

Additive manufacturing of continuous fibre reinforced thermoplastic composites using fused deposition modelling: Effect of process parameters on mechanical properties

A hybrid additive manufacturing process for production of functional fiber-reinforced polymer composite structures

A Continuous Fiber-Reinforced Additive Manufacturing Processing Based on PET Fiber and PLA

High-Throughput Additive Manufacturing of Continuous Carbon Fiber-Reinforced Plastic by Multifilament