Abstract:Enhanced activity in low-temperature water-gas shift (LT-WGS) reaction of some ceramometal catalysts compared to conventional Cu–Zn–Al oxide catalyst was demonstrated. Porous ceramometals were synthesized from powdered CuAl alloys prepared by mechanical alloying with the addition of either CuAlexp powders produced by current spark explosion of Cu+Al wires or CuZnAl oxide obtained by coprecipitation. Their structural, microstructural, and textural characteristics were examined by means of X-ray diffraction, scanning electron microscopy with energy-dispersive X-ray spectrometry, NMR, and adsorption methods, and catalytic properties were studied in the LT-WGS reaction. CuAlO/CuAl ceramometals were found to have mostly the egg-shell microstructure with the metallic cores (AlxCu1–x, Al2Cu, and Al4Cu9) and the oxide shell containing copper oxides and/or mixed oxides of copper and aluminum and, at same time, CuAlO/CuAl ceramometal with incorporated additives was found to create a more complicated microstructure. A large amount of X-ray amorphous oxides of copper and aluminum is typical for all composites. CuAl ceramometal was shown to be more active than the CuZnAl oxide catalyst in spite of a much lower specific surface area. The CuAl+CuZnAl catalyst consisting of prismatic granules showed a higher activity in comparison with CuZnAl oxide consisting of cylindrical granules. The activity of the composite granulated catalyst referred to its unit weight was more than 6-fold higher as compared to the oxide catalyst, while the activity per the surface area was found to be more than an order of magnitude higher due to much higher specific activity of small fraction and additively much lower diffusion limitation of granules.This article has not yet been cited by other publications.

Impact of Incorporation of Active Nanoporous Components or Their Precursors in a CuAlO/CuAl Ceramometal Skeleton on the Properties in the Low-Temperature Water-Gas Shift Reaction

Effect of Stoichiometry and Method of Synthesis of Powdered Cu–Fe–Al Precursors on the Stability and Activity of CuFeAlO/CuFeAl Ceramometals in the High-Temperature Water Gas Shift Reaction

The Impact of Stoichiometry and Method of Synthesis of Powder Cu–Fe–Al Precursor on Stability and Activity of Ceramometals CuFeAlO/CuFeAl in High Temperature WGSR

Improved Water-Gas Shift Performance of Au/NiAl LDHs Nanostructured Catalysts via CeO2 Addition

Formation of a Porous Crystalline Mg1‒ x Al2O y Overlayer on Metal Catalysts via Controlled Solid‐State Reactions for High‐temperature Stable Catalysis

Nanoporous Gold-Supported Ceria for the Water–Gas Shift Reaction: UHV Inspired Design for Applied Catalysis

Comparative studies of Pd, Ru, Ni, Cu/ZnAl2O4 catalysts for the water gas shift reaction

Synergistic effect of Cu+ single atoms and Cu nanoparticles supported on alumina boosting water-gas shift reaction

Synergistic Effect of Catalytic Action of Copper and Cerium in the Oxidation of CO on Modified Zeolites Cu/Ce/ZSM-5

The active sites of Cu–ZnO catalysts for water gas shift and CO hydrogenation reactions

CeO 2 /Cu 2 O/Cu Tandem Interfaces for Efficient Water-Gas Shift Reaction Catalysis.

Effects of Doping Rare Earth Elements (Y, La, and Ce) on Catalytic Performances of CoMo/MgAlM for Water Gas Shift Reaction

Cu and Cu-Fe Bi-Metal Nanoparticles Encapsulated in Hollow S-1 Zeolite for Reverse Water Gas Shift Reaction

CeO2/Cu2O/Cu Tandem Interfaces for Efficient Water-Gas Shift Reaction Catalysis.

Cu Modified SrTiO3 Perovskites Toward Enhanced Water Gas Shift Catalysis: A Combined Experimental and Computational Study

Tailoring the Electronic Metal‐Support Interaction of Single‐Atom Platinum Catalysts for Boosting Water‐Gas Shift Reaction

Effect of synthesis method on the properties of ceria–zirconia modified alumina and the catalytic performance of its supported Pd-only three-way catalyst

Incorporating Rich Mesoporosity into a Ceria-Based Catalyst Via Mechanochemistry

The Microstructural Refinement and Performance Improvement of a Nanoporous Ag/CeO2catalyst for NaBH4oxidation.

Liquid Metal-Enabled Tunable Synthesis of Nanoporous Polycrystalline Copper for Selective CO2-to-Formate Electrochemical Conversion

Enhanced CuAl2O4 Catalytic Activity via Alkalinization Treatment toward High CO2 Conversion during Reverse Water Gas Shift Reaction