Abstract:The Field Programmable Gate Array (FPGA) structure poses several constraints that make the implementation of complex asynchronous circuits such as Time–Mode (TM) circuits almost unfeasible. In particular, in Programmable Logic (PL) devices, such as FPGAs, the operation of the logic is usually synchronous with the system clock. However, it can happen that a very high–performance specifications demands to abandon this paradigm and to follow an asynchronous implementative solution. The main driver forcing the use of programmable logic solutions instead of tailored Application Specific Integrated Circuits (ASIC), best suiting an asynchronous design, is the request coming from the research community and industrial R&D of fast–prototyping at low Non Recursive Engineering (NRE) costs. For instance in the case of a high–resolved Time–to–Digital Converter (TDC), a signal clocked at some hundreds of MHz implemented in FPGA allows implementing a TDC with resolution at ns. If a higher resolution is required, the signal frequency cannot be increased further and one of the aces up the designer’s sleeve is the propagation delay of the logic in order to quantize the time intervals by means of a so-called Tapped Delay–Line (TDL). This implementation of TDL–based TDC in FPGAs requires special attention by the designer both in making the best use of all available resources and in foreseeing how signals propagate inside these devices. In this paper, we investigate the implementation of a high–performance TDL–TDC addressed to 28–nm 7–Series Xilinx FPGA, taking into account the comparison between different technological nodes from 65–nm to 20–nm. In this context, the term high–performance means extended dynamic–range (up to 10.3 s), high–resolution and single–shot precision (up to 366 fs and 12 ps r.m.s respectively), low differential and integral non–linearity (up to 250 fs and 2.5 ps respectively), and multi–channel capability (up to 16).

Design Methodology and Timing Considerations for implementing a TDC on a Cyclone V FPGA Target

A High-Resolution Tdc Implemented In A 90nm Process Fpga

A Resource-Saving Dual Channel Time-to-digital Converter with Shared Tapped Delay Line in FPGAs

A Multi-Chain Merged Tapped Delay Line for High Precision Time-to-Digital Converters in FPGAs

Tapped delay line for compact time-to-digital converter on UltraScale FPGA and its coding method

Design of A High Performance Time-to-Digital Converter with Zero Dead Time on Xilinx FPGA

Time-to-Digital Converter IP-Core for FPGA at State of the Art

A New Method of Implementing Vernier TDC in a Xilinx Kintex-7 FPGA

A High-Resolution TDC Design Based on Multistep Fine Time Measurement by Utilizing Delay-Adjustable Looped Carry Chains on FPGAs

A Resource-saving Method for Implementation of High-Performance Time-to-Digital Converters in FPGA.

A 16-Channel 15 Ps TDC Implemented in a 65 Nm FPGA

Two Novel Designs Of Multi-Phase Clocked Ultra-High Speed Time Counter On Fpga For Tdc Implementation

High-Performance Time-to-Digital Conversion on a 16-nm Ultrascale+ FPGA

High-Resolution Time-to-Digital Converters Implemented on 40-, 28-, and 20-Nm FPGAs

A Design of High Resolution One-Clock-Cycle TDC Based on FPGA

Performance Analysis and IP Core Implementation of Two High Performance Time-to-digital Converters on Xilinx 7-Series FPGA

High-Performance Wave Union Time-to-Digital Converter Implementation Based on Routing Path Delays of FPGA

A 5.5 ps Time-interval RMS Precision Time-to-Digital Convertor Implemented in Intel Arria 10 FPGA

An Fpga-Integrated Time-To-Digital Converter Based on A Ring Oscillator for Programmable Delay Line Resolution Measurement

An FPGA-Based High Precision Pulse Width Measurement Time-to-Digital Converter with Dual-TDL Multiplexer Encoder

A High Precision Time-To-Digital Converter Based on Multi-Phase Clock Implemented Within Field-Programmable-Gate-Array