Abstract:The usage of low-grade ferrous scrap has increased over decades to decrease CO2 emissions and to produce steel products at a low cost. A serious problem in melting post-consumer scrap material is the accumulation of tramp elements, e.g., Cu and Sn, in the liquid steel. These tramp elements are difficult to remove during conventional steelmaking processes. Sn is considered as one of the most harmful tramp elements because, together with Cu, it sometimes induces the liquid metal embrittlement in high-temperature ferrous processing, e.g., continuous casting and hot rolling. Furthermore, the chemical interaction between Fe and Sn plays an important role in the Sn smelting process. The raw material used in the Sn smelting process is SnO2 (cassiterite), in which Fe3O4 is a gangue in the Sn ore. In the process, the reduction of Fe3O4 is unavoidable, which results in forming a Fe-Sn alloy (hardhead). The recirculation of the hardhead decreases the furnace capacity and increases the energy consumption in the smelting. The need to efficiently recover Sn from secondary resources is therefore inevitable. The CALculation of PHAse Diagrams (CALPHAD) approach helps to predict the equilibrium state of the multicomponent system. Previously reported studies of the Fe-Sn system show inconsistencies in the calculations and the experimental results. Mainly the miscibility gap in the liquid phase was under debate, as experimental data of the phase boundary are scattered. Experimental study and re-optimization of model parameters were carried out with emphasis on the correct shape of the miscibility gap. Three different experimental techniques were employed: differential scanning calorimetry, electromagnetic levitation, and contact angle measurement. The present thermodynamic model has higher accuracy in predicting the solubility of Sn in the body-centered cubic (bcc), compared to previous assessments. This is achieved by re-evaluating the Gibbs energies of the FeSn and FeSn2 compounds and the peritectic reaction related to Fe5Sn3. Also, the inconsistencies related to the miscibility gap around XSn = 0.31-0.81 were resolved. The database developed in the present study can contribute to the development of a large CALPHAD database containing tramp elements.

Critical Evaluation and Thermodynamic Optimization of the Fe-P System

Critical Evaluation and Thermodynamic Optimization of the Cr–P and Cr–Fe–P Systems

Critical Evaluation and Thermodynamic Re-Optimization of the Si–P and Si–Fe–P Systems

Critical evaluation and thermodynamic modeling of the Fe–P and Fe–C–P system

Thermodynamic properties and phase equilibria in the Fe–P system

Experimental Study of High Temperature Phase Equilibria in the Iron-Rich Part of the Fe-P and Fe-C-P Systems

Thermodynamic analysis of the Fe–Ti–P ternary system by incorporating first-principles calculations into the CALPHAD approach

Modeling of temperature-concentration ranges of phase stability and liquidus surface in the ternary Fe–P–C system and phase composition experimental study

Thermodynamic Analysis of Phase Equilibria in the Fe–Nb–P Ternary System

Thermodynamic Assessment of the P2O5-Na2O and P2O5-MgO Systems

Experimental Investigation and Thermodynamic Calculations of the Co-Fe-Ti System

Thermodynamic Calculation Of Phase Diagram And Phase Stability With Nano-Size Particles

A thermodynamic description of the Al–Fe–Si system over the whole composition and temperature ranges via a hybrid approach of CALPHAD and key experiments

A Calculational Method for Heat Transfer Coefficient of Phosphoric Furnace by Hot Process

Thermodynamic Assessment of the Fe–Mn–Ni System and Diffusion Mobility of Its Face-Centered Cubic Phase

Thermodynamic Assessment of Phosphorus Removal From Si-Fe Levitated Droplets

Modeling of the surface tension of liquid Fe-P alloy by calculation of liquidus line in Fe-P binary system

Thermodynamic Evaluation of the Fe-Zn Binary System with Reference to the Latest Experimental Phase Diagram

A Powerful Optimization Technique for the Calculation of Binary Phase Diagrams Using Partial Phase Diagram Data

Assessment of phase equilibria and thermodynamic properties in the Fe-RE (RE = rare earth metals) binary systems

Thermodynamic modeling of the Fe-Sn system including an experimental re-assessment of the liquid miscibility gap