Abstract:The Self-sensing Active Magnetic Bearings (SSAMBs) which feature for the simplification of independent displacement sensors, contribute to both cost reduction and convenience in control and assembly. The key point of this technique is to accurately estimate rotor position signals directly from coil voltages or currents, thus the actuator itself also serves as a virtual displacement sensor. Although several feasible approaches have been proposed to realize the self-sensing process, there still lie limitations in estimation accuracy, robustness and dynamic performance of the system. In fact, due to the nonlinear property of the self-sensing process, few accurate models are available for quantitative analysis of the estimation accuracy, and this restricts further development of this technique. Focusing on the modulation type SSAMBs, an accurate analytical model of the self-sensing in frequency domain is firstly established in this paper. Eddy current effects and filter properties are also considered for better accuracy. Based on this model, we evaluate possible estimation error sources during the self-sensing process, and investigate if the estimation accuracy can be improved fundamentally by selecting main system parameters properly. In this way, the estimation accuracy gets further improved under existing compensation methods, and better system robustness and dynamic performance can be achieved. Finally, the analytical model and associated conclusions are validated through static experiment, 4-Degree of Freedom (DOF) self-sensing rotor levitation experiment and 0-5000 rpm rotating operation experiment on a 4-DOF rigid rotor-radial SSAMBs platform. (C) 2016 Elsevier B.V. All rights reserved.

A Review of Superconducting Magnetic Bearings and Their Application

Design and Analysis of Parallel Hybrid-Excited Superconducting Linear Motor for High-Speed Electromagnetic Suspension Maglev

Stiffness Analysis And Levitation Force Control Of Active Magnetic Bearing For A Partially-Self-Bearing Flywheel System

Researching Magnetic Suspension for 1000mw Hydraulic Generator Set

Study Of The Load Reduction For Hydro-Generator Bearing By Hybrid Magnetic Levitation

Research On An Axial Maglev Device With Primary Superconductive Coils For A 1000 Mw Hydraulic Generator Set

Design and Analysis of a Superconducting Induction Magnetic Levitation Device for Hydraulic Turbo-Generator

Superconducting Magnetic Bearings Simulation using an H-formulation Finite Element Model

High-Tc Superconducting Bearings Design: Towards High-Performance Machines

Characterization and Improvement of Axial and Radial Stiffness of Contactless Thrust Superconducting Magnetic Bearings

Stabilization of a Magnetic Repulsive Levitation Flywheel System Using a High-Efficiency Superconducting Magnetic Bearing

Control System Design And Implementation Of A Partially-Self-Bearing Flywheel Energy Storage System

Superconducting magnetic levitation: principle, materials, physics and models

Static Behavior of a Complex High Temperature Superconductor Thrust Bearings

Dynamic characteristics of a flywheel energy storage system using superconducting magnetic bearings

Comparative analysis of single-coil and double-coil active magnetic bearings for high-speed application

Rotor Position Estimation Strategy for Self-Sensing Active Magnetic Bearing Considering Eddy Currents

Lateral Displacement Influence on the Levitation Force of YBCO Coated Conductor Linear Bearings

Levitation forces of an uncentralized high temperature superconductor thrust bearings

Position Estimation Accuracy Improvement Based on Accurate Modeling of Self-Sensing Active Magnetic Bearings

Progress on electrodynamic passive magnetic bearings for rotor levitation