Abstract:Separating azeotropic organic-organic mixtures using membranes is of great importance in the chemical and petrochemical industries, but remains extremely challenging because membranes must be able to withstand harsh working conditions while providing adequate permselectivity. Silicon carbide (SiC)-based membranes have attracted a great deal of interest due to their high level of structural stability, mechanical strength, and corrosion resistance. Herein is an account of the first study focused on a systematic investigation into the physicochemical and pore structural variations of polycarbosilane (PCS)-derived SiC-based membranes under different air-curing and pyrolysis temperatures. Air curing for cross-linking behavior was found to occur at temperatures as low as 150 °C, and the completion of polymer-to-ceramic conversion for PCS was observed at 750 °C. In addition, the pore structure and surface properties (hydrophilicity/hydrophobicity) of PCS membranes could be tuned by the pyrolysis temperature. PCS membranes derived from air curing at a temperature as low as 150 °C possessed sub-nanopores that ranged from 0.5 to 0.66 nm depending on the pyrolysis temperature. The formation of these sub-nanopores was attributed to sparsely cross-linked networks. Subsequently, the pervaporation (PV) performance of methanol/methyl acetate, methanol/toluene, and methanol/methyl tert-butyl ether were evaluated and discussed with respect to any effects of different pore sizes of the membranes and operating parameters. The most outstanding separation performance emerged from SiC-based membranes with a pore size of 0.50 nm that were air-cured at 150 °C and then pyrolyzed at 750 °C. The impressive PV separation capability was attributed to the surface hydrophilicity, suitable pore size, and high quality of the SiC-based membranes. Furthermore, the PV performance correlated well with single-gas permeation, suggesting that PV performance could be predicted based on single-gas permeation. The developed SiC-based membranes have excellent separation performance and are a promising candidate for the PV separation of MeOH from organic mixture systems.

Membrane characterisation from the support to the skin layer: Application to silicon carbide (SiC) membranes

Mesoporous SiC-Based Photocatalytic Membranes and Coatings for Water Treatment

Ceramic Processing of Silicon Carbide Membranes with the Aid of Aluminum Nitrate Nonahydrate: Preparation, Characterization, and Performance

Silicon carbide microfiltration membranes for oil-water separation: Pore structure-dependent wettability matters

SiO2 Modification of Silicon Carbide Membrane via an Interfacial In Situ Sol–Gel Process for Improved Filtration Performance

Highly permeable silicon carbide-alumina ultrafiltration membranes for oil-in-water filtration produced with low-pressure chemical vapor deposition

Silicon carbide ceramic membrane support sintered at 800 °C with low-temperature sintering aid

Highly permeable porous silicon carbide support tubes for the preparation of nanoporous inorganic membranes

Preparation and Characterization of SiC Composite Filtration Membrane Materials

Lower-temperature preparation of SiC ceramic membrane using zeolite residue as sintering aid for oil-in-water separation

Extrusion of Silicon Carbide Based Tubular Membrane Incorporated With Coal Fly Ash and Performance Evaluation in Water Treatment

Photopolymerization enabled in-air highly oleophobic and hydrophilic SiC membranes with improved antifouling performance in oil-in-water emulsion separation

Fabrication of high-performance recrystallized silicon carbide ceramic membrane based on particle packing optimization

Processing and microstructure-permeation properties of silica bonded silicon carbide ceramic membrane

Recent Progress in Silicon Carbide-Based Membranes for Gas Separation

Synthesis and characterization of mesoporous silica membranes via dip-coating and hydrothermal deposition techniques

Fabrication of high-performance SiC ceramic membranes modified using in situ grown mullite whiskers and high-temperature filtration

Relation Between Porosity and Permeability of Ceramic Membrane Supports

Efficient strategies for engineering high-permeance SiC ceramic membranes for gas/solid filtration: Prefilling method

Optimization of Etching Processes for the Fabrication of Smooth Silicon Carbide Membranes for Applications in Quantum Technology

Low-temperature cross-linking fabrication of sub-nanoporous SiC-based membranes for application to the pervaporation removal of methanol