Abstract:This research examines screening of the factors affecting cotton-sized yarn gain strength, elongation, stretch, size pick-up, and yarn abrasion resistance. The factors considered in this research are sizing machine parameters like sizing machine speed, squeezing roller pressure, warp yarn tension of various sizing machine zones, warp yarn twist, and viscosity of the size paste. Taguchi design with Minitab software has been used to design and analyze the results of the experiments. The study revealed that viscosity, yarn twist, sizing machine speed, and wet tension affected sized yarn gain strength significantly. Viscosity has maximum contribution to gain strength (34.57%) compared to other factors and has a positive effect on the gain strength of the sized yarn. For stretch percentage and the loss elongation of sized yarn, the wet tension is the most significant factor with 50.30% and 52.13% contribution respectively. Moreover, for the size pick-up and yarn abrasion resistance of sized yarn, the speed of the sizing machine is the most effective parameter with 44.45% and 56.29% contribution, respectively. The screening experimental result revealed the most significant factor that must be further optimized using response surface methods of experimental design. 本研究筛选了影响棉浆纱增强、伸长率、拉伸度、上浆率和耐磨性的因素. 本研究考虑的因素是浆纱机参数,如浆纱机速度、挤压辊压力、各浆纱机区域的经纱张力、经纱捻度和浆糊的粘度. 使用田口设计的Minitab软件对实验结果进行了设计和分析. 研究表明,粘度、纱线捻度、浆纱机转速和湿张力对浆纱增强有显著影响. 与其他因素相比,粘度对增强的贡献最大(34.57%),并且对上浆纱的增强有积极影响. 对于浆纱的拉伸率和损耗伸长率,湿张力是最显著的因素,其贡献率分别为50.30%和52.13%. 此外,对于上浆纱的上浆性能和耐磨性,浆纱机的速度是最有效的参数,其贡献率分别为44.45%和56.29%. 筛选实验结果揭示了最重要的因素,必须使用实验设计的响应面方法进行进一步优化.

Analysis of the factors affecting the dimensional stability of socks using full-factorial experimental design method

Study of Thermal Comfort Properties on Socks made from Recycled Polyester/Virgin Cotton and its Blends

The Role of Yarn Counts and Polyester/Cotton Blends in Comfort of Knitted Fabric

Determination of Factors Affecting the Quality of Sized Cotton Yarn Using Screening Experimental Method

The effect of size concentration, lubricant and plasticizer agents contents on cold sizing process performance of cotton warp yarns: modelling and optimization studies

Finite element simulation of pressure and volume shrinkage of the top part of socks using ABAQUS

Impact of Repeated Home Laundering on the Cyclic Deformation Performance of Elastane Knitted Sportswear Fabrics

Impact of yarn compositions, loop length, and float stitches on the mechanical behavior of knitted fabrics via full factorial design and RSM

Dimensional Analysis of Children's Clothing Product Design Based on SPSS Factor Analysis

Usage Durability and Comfort Properties of Socks Made from Differently Spun Modal and Micro Modal Yarns

Effect of knitting structure and dyeing process on drying time, air and vapor permeability

Quality Assessment of Socks Produced from Viscose and Lyocell Fibers

An Innovative Approach to Enhance the Durability and Sustainability of Shoe Insoles

Development of sustainable dual core-spun yarns using several filaments and recycled cotton sourced from pre-consumer fabric waste

Quality and structural properties of gimp fancy yarns using the Design of Experiments

The Influence of Yarn and Knit Structure on Comfort Properties of Sportswear Fabric

Influence of fabric structure and finishing pattern on the thermal and moisture management properties of unidirectional water transport knitted polyester fabrics

Structural effect of polyester SCY knitted fabric on fabric size, stretch properties, and clothing pressure

Effect of Water and Chemical Stresses on the Silver Coated Polyamide Yarns

Novel method on thermal resistance prediction and thermo-physiological comfort of socks in a wet state

Evaluating the tensile stress relaxation of rib weft-knitted fabrics using viscoelastic models