Abstract:In this article, Aspen Plus was used to simulate a process for separating the mixture of decanol + undecanol + tetradecane + pentadecane to obtain decanol + undecanol product and tetradecane + pentadecane product. Aqueous ethanol solution and octadecane were chosen as potential extractants. First, the liquid-liquid equilibrium (LLE) data of the four quaternary systems {ethanol (1) + decanol (2) + tetradecane (4) + water (6), and ethanol (1) + decanol (2) + pentadecane (5) + water (6), ethanol (1) + undecanol (3) + tetradecane (4) + water (6), ethanol (1) + undecanol (3) + pentadecane (5) + water (6)} and the six-component system {ethanol (1) + decanol (2) + undecanol (3) + tetradecane (4) + pentadecane (5) + water (6)} were obtained at 293.15, 298.15, and 303.15 K under atmospheric pressure. The UNIQUAC model was used to regress the LLE data of the four quaternary systems to obtain the binary interaction parameters, which were used to predict the LLE data of the six-component system. The results showed that the predicted and experimental data were in great agreement. Second, the LLE data of the sevencomponent system {ethanol (1) + decanol (2) + undecanol (3) + tetradecane (4) + pentadecane (5) + water (6) + octadecane (7)} were obtained at 303.15, 308.15, and 313.15 K under atmospheric pressure, and the binary interaction parameters involving the component octadecane were obtained by data regression using the UNIQUAC model. Finally, a 2500t/a process of separating the mixture of decanol + undecanol + tetradecane + pentadecane was simulated in Aspen Plus with these regressed binary interaction parameters. On optimization, 99.80 wt % decanol + undecanol product and 99.76 wt % tetradecane + pentadecane product were obtained.

Simulation Studies of n-Heptane/Toluene Separation by Extractive Distillation Using Sulfolane, Phenol and NMP

Simulation studies of n-heptane/toluene separation by extractive distillation using sulfolane, phenol, and NMP

Extractive Distillation of Hydrocarbons with Dimethylformamide: Experimental and Simulation Data

Simulation on Separation of Benzothiophene by Extractive Distillation

Toluene/n-Heptane Separation by Extractive Distillation with Tricyanomethanide-Based Ionic Liquids: Experimental and CPA EoS Modeling

Separation of the Azeotropic Mixture Methanol and Toluene Using Extractive Distillation: Entrainer Determination, Vapor–Liquid Equilibrium Measurement, and Modeling

Intensified extractive distillation process for the separation of n-heptane-toluene mixture using the ionic liquid 1-Ethyl-4-methylpyridinium Bis(trifluoromethanesulfonyl)imide

Separation of aromatic hydrocarbons (toluene or benzene) from aliphatic hydrocarbon (n-heptane) by extraction with ethylene carbonate

Simulation of Acetophenone and Α-Phenylethanol Separation by Extractive Distillation

Study on the Separation of Binary Azeotropic Mixtures by Continuous Extractive Distillation

Separation mechanism and thermodynamic phase behavior of n-propanol/p-xylene azeotrope from petrochemical wastewater by green solvents

Mechanistic Analysis and Process Simulation of Ethyl Acetate-Ethanol Separation by Complex Solvent Extractive Distillation

Experimental Investigation of Liquid–Liquid Extraction of Toluene + Heptane or Toluene + Hexane Using Deep Eutectic Solvents

Phase Behavior and Thermodynamic Model Parameters in Simulations of Extractive Distillation for Azeotrope Separation

Extraction of {benzene, toluene, thiophene and 3-methylthiophene} from n-hexane: Liquid-liquid equilibrium measurements and interaction exploration

Separation of a two binary-azeotrope acetonitrile-cyclohexane-toluene ternary mixture via continuous triple column extractive distillation with heat integration: design, simulation, and multi-objective genetic-algorithm (MOGA) optimization

Simulation of Methylnaphthalene Alkylation Product Distillation by Aspen Plus

Liquid–Liquid Equilibrium Data and Process Simulation for Separating the Mixture of Decanol + Undecanol + Tetradecane + Pentadecane

A simulation study on selection of optimized process for azeotropic separation of methanol and benzene: Internal heat integration and economic analysis

Liquid–Liquid Equilibrium Study in the N-Heptane + Phenol + Sulfolane Ternary System

Molecular Property Targeting for Optimal Solvent Design in Extractive Distillation Processes