Abstract:The trends of industry 4.0 transform a process design to a cost-effective development with digital simulation. The objective of this study was to simulate the separation and purification of triglycerides from crude Calophyllum inophyllum oil with a continuous countercurrent extraction method using Aspen HYSYS V.11 to find the appropriate binary parameter coefficients and predict the optimal conditions. It is expected that the oil's purity suitable with the edible oil standards (minimum 96% triglycerides and 0.3% free fatty acids). The variables used are the flow rate (n-hexane + oil) to methanol and the total mass ratio of solvent to oil. The C. inophyllum oil used contains 63.91% triglycerides, 15.76% free fatty acids, 12.25% diglycerides, and 4.66% monoglycerides. It was evaluated by applying NRTL (Non-Random Two Liquid) and UNIQUAC (Universal Quasi Chemical) fluid packages with binary interaction parameters of UNIFAC-VLE, UNIFAC-LLE, Immiscible, and Modified (fitting parameters). The most suitable fluid package and binary interaction parameter pairing was achieved by combining NRTL fluid package with Modified binary interaction. The highest purity of triglycerides was 92.86%alongside a simulation error of 0.01% while the free fatty acid was 2.17% and 0.91%, respectively, at solvents (hexane and methanol) to oil mass ratio of 6:1 with a hexane-oil to methanol flow rate ratio of 6:15 (LPH/LPH). By upscaling the n number in the extractor, this model can predict the best result of separation and purification of triglycerides with the highest purity of triglycerides and free fatty acids were 96.736% and 0,0001%, respectively. Thus, the edible oil standards can be met.

Simulation studies of n-heptane/toluene separation by extractive distillation using sulfolane, phenol, and NMP

Simulation Studies of n-Heptane/Toluene Separation by Extractive Distillation Using Sulfolane, Phenol and NMP

Extractive Distillation of Hydrocarbons with Dimethylformamide: Experimental and Simulation Data

Simulation on Separation of Benzothiophene by Extractive Distillation

Simulation of Methylnaphthalene Alkylation Product Distillation by Aspen Plus

Liquid–Liquid Equilibrium Study in the N-Heptane + Phenol + Sulfolane Ternary System

Toluene/n-Heptane Separation by Extractive Distillation with Tricyanomethanide-Based Ionic Liquids: Experimental and CPA EoS Modeling

Separation of aromatic hydrocarbons (toluene or benzene) from aliphatic hydrocarbon (n-heptane) by extraction with ethylene carbonate

Extraction process design for the separation of aromatic and aliphatic hydrocarbons using organic solvent, ionic liquid or their mixture: a comparative study

Extraction of aromatic and polyaromatic compounds with NMP: experimental and model description

Extraction of {benzene, toluene, thiophene and 3-methylthiophene} from n-hexane: Liquid-liquid equilibrium measurements and interaction exploration

Liquid–Liquid Equilibrium Data and Process Simulation for Separating the Mixture of Decanol + Undecanol + Tetradecane + Pentadecane

Simulation separation of triglycerides from Calophyllum inophyllum oil with continuous countercurrent extraction process using Aspen HYSYS

Phase Behavior and Thermodynamic Model Parameters in Simulations of Extractive Distillation for Azeotrope Separation

Simulation of Acetophenone and Α-Phenylethanol Separation by Extractive Distillation

Simulation of extractive distillation process of ethyl acetate—n-hexane system using aspen plus

Production of hydrocarbon based solvent with low aromatic content using ASPEN Plus

Experimental Investigation of Liquid–Liquid Extraction of Toluene + Heptane or Toluene + Hexane Using Deep Eutectic Solvents

Separation of the Azeotropic Mixture Methanol and Toluene Using Extractive Distillation: Entrainer Determination, Vapor–Liquid Equilibrium Measurement, and Modeling

Separation of toluene/n-heptane mixtures experimental, modeling and optimization