Abstract:This paper presents the world’s smallest inset permanent magnet synchronous motor (PMSM) with a soft magnetic composite (SMC) core, providing ease of manufacturing for micromachine applications without silicon steel laminations. The inset motor can offer an additional reluctance torque and higher torque density with a lower usage amount of permanent magnet. A 15 mm diameter inset motor was developed with the thickness of a tile-type permanent magnet which is limited to 1 mm by the manufacturer. The motor was designed with high torque density and low torque ripple by varying the interpole iron width for the rotor. Two inset motors were made using both SMC and silicon steel materials for comparison. The performance of the SMC motor was inferior to the silicon steel motor, but it still meets the specifications of the commercial market. If the thickness of the tile-type permanent magnet is further reduced, the micro inset motor with a SMC core can be easily mass-manufactured using powder sintering.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to develop the world's smallest embedded permanent magnet synchronous motor (PMSM) and use soft magnetic composite (SMC) as the core material of the motor to simplify the manufacturing process in micromechanical applications without using silicon steel sheets. Specifically, the paper aims to: 1. **Increase the torque density of micro - motors and reduce torque fluctuations**: Optimize the motor design by changing the inter - pole iron width of the rotor, thereby achieving higher torque density and lower torque fluctuations. 2. **Verify the feasibility of SMC materials in micro - motors**: Compare SMC materials with traditional silicon - steel materials and evaluate their performance in micro - motors, especially whether SMC materials can be more easily mass - produced when the thickness of permanent magnets is further reduced. 3. **Solve the problems in micro - motor manufacturing**: Due to the difficulties in miniaturized manufacturing of traditional embedded PMSMs, the paper explores how to use SMC materials and powder metallurgy techniques to achieve net - shape manufacturing of micro - motors, thereby simplifying the micromachining process. ### Key problem summary - **Improve micro - motor performance**: Improve the torque density of micro - motors and reduce torque fluctuations by optimizing design parameters (such as inter - pole iron width). - **Material comparison**: Compare the performance differences between SMC materials and silicon - steel materials in micro - motors and verify the feasibility of SMC materials. - **Manufacturing process improvement**: Explore the use of SMC materials and powder metallurgy techniques to simplify the manufacturing process of micro - motors, especially for the application of miniaturized motors. These research objectives aim to promote the development of micro - motor technology, especially in small devices that require high precision and high performance (such as micro - robots, micro - fluidic devices, etc.).

Investigation of an Inset Micro Permanent Magnet Synchronous Motor Using Soft Magnetic Composite Material

Investigation of Short Permanent Magnet and Stator Flux Bridge Effects on Cogging Torque Mitigation in FSPM Machines

Research on Permanent Magnet linear Synchronous Motors Driver for Micro-fabrication

Design Optimization with Outer Rotor Interior Permanent Magnet Synchronous Motor with Hybird Permanent Magnet

Design and Analysis of a Transverse-flux Permanent Magnet Motor With Hybrid Iron-core

Robust Design of a Low-Cost Permanent Magnet Motor with Soft Magnetic Composite Cores Considering the Manufacturing Process and Tolerances

A Novel Interior Permanent Magnet Synchronous Motor with High Strength Soft Magnetic Composite Powders as Stator-Rotor Material for Electric Vehicle Application

Comparative Investigation Of Single-Sided And Double-Sided Permanent Magnet Linear Motor

Magnetically soft composites based on iron powders for creating components of a two-stator combined electric motor

Optimized Design of High Torque Density Permanent Magnet Synchronous Motor with Halbach Magnet

Performance Investigation of a Novel Multi-Tooth Switched-Flux Linear Motor

Investigation of Analytical Models for Surface-Mounted Permanent Magnet Motor Using Voltage Source Inverter

Formulation and mixing conditions of magnetic composite materials used for magnetic wedges in an interior permanent magnet synchronous motor

Design and Analysis of Outer Rotor Permanent-Magnet Vernier Machines with Overhang Structure for In-Wheel Direct-Drive Application

Design Permanent-Magnet Material of Permanent-Magnetic Synchronous Motor

Quantitative comparison of low-cost electrical machines with soft magnetic composite and ferrite magnet materials

Investigation of a 3D-Magnetic Flux PMSM with High Torque Density for Electric Vehicles

Magnetic and Mechanical Properties of Iron-Based Soft Magnetic Composites Coated with Silane Synergized by Bi2O3

Application of Soft Magnetic Composite in XEV Motor Core Manufacturing: Process Effects and Performance Analysis

Metal Amorphous Nanocomposite Soft Magnetic Material-Enabled High Power Density, Rare Earth Free Rotational Machines

A Novel High-Speed Permanent Magnet Synchronous Motor for Hydrogen Recirculation Side Channel Pumps in Fuel Cell Systems