Abstract:Solid oxide fuel cells (SOFCs) are efficient and clean energy conversion devices, but one of the major challenges for their marketization is the instability of different component materials under high temperature operating conditions. The existence of a certain internal stress gradient between materials with different thermal expansion characteristics in the process of SOFCs from low temperature assembly to high temperature use is the main reason of this instability, leading to the inability of SOFCs to repeat start -stop and the rapid decay of long-term stability performance. To improve these problems, a creative concept of fuel cell interface overall regulation is proposed, simplifying the complex interface between different components of SOFCs into a unified and adjustable quasi -zero difference thermal expansion interface. The composite of high catalytic activity electrode material and high stability negative thermal expansion material is used for electrolyte support structure symmetrical cell, which makes the whole cell "sandwich" structure thermally and mechanically compatible. As a concept verification, the classic high catalytic performance electrode material La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-8 (LSCF), Gd 0.2 Ce 0.8 O 2-8 (GDC) and NdMnO 3 (NM) negative thermal expansion material with high chemical stability and mechanical stability were composited in equal proportions to form LSCF@GDC &NM electrode as the symmetrical electrode. After equal proportion compositing, the thermal expansion curve of LSCF@GDC &NM material can highly coincide with the thermal expansion curve of GDC, making the single cell with LSCF@GDC &NM electrode can withstand 25 power thermal cycles without significant performance decay, achieving 442 mW cm -2 at 800 degrees C and maintaining stably for 140 h without any degradation. These results show that using negative thermal expansion material to regulate electrode strategy is expected to make a whole zero difference thermal fuel cell configuration.

Application of a negative thermal expansion oxide in SOFC cathode

Improved SOFC Performance by Enhancing Cathode/electrolyte Bonding and Grain Refinement of Cathode with Thermal Expansion Offset

A high-performance composite cathode based on thermal expansion complementation for SOFC

Tuning the Thermo-Mechanical Synergies Effect of Solid Oxide Fuel Cells with Negative Thermal Expansion NdMnO3 in La0.6Sr0.4Co0.2Fe0.8O3-δ-based Symmetric Electrode

Tuning the Thermo-Mechanical Synergies Effect of Solid Oxide Fuel Cells with Negative Thermal Expansion NdMnO 3 in La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-8-based Symmetric Electrode

High Performance Thermal Expansion Offset Lscf-Szm Cathodes of It-Sofcs

A Zn-Doped Ba0.5Sr0.5Co0.8Fe0.2O3-δ Perovskite Cathode with Enhanced ORR Catalytic Activity for SOFCs

Manipulating the Activity and Thermal Compatibility of NdBaCoFeO5+δ Cathodes for Intermediate-Temperature Solid Oxide Fuel Cells Via Fluorine Doping

A High-Performing Proton-Conducting Solid Oxide Fuel Cell with Layered Perovskite Cathode in Intermediate Temperatures

Improved Electrochemical Performance and Thermal Expansion Compatibility of LnBaCoFeO5+δ–Sm0.2Ce0.8O1.9 (lnpr and Nd) Composite Cathodes for IT-SOFCs

Enhancing chemical stability and performance in proton-conducting solid oxide fuel cells through novel composite cathode design

Potentiality of cobalt-free perovskite Ba0.5Sr 0.5Fe0.9Mo0.1O3-δ as a single-phase cathode for intermediate-to-low-temperature solid oxide fuel cells

High-Performance Srnb0.1co0.9-Xfexo3-Delta Perovskite Cathodes For Low-Temperature Solid Oxide Fuel Cells

Preparation and Properties of Fe-Based Double Perovskite Oxide as Cathode Material for Intermediate-Temperature Solid Oxide Fuel Cell

High Active Cathode for Doped Ceria Electrolyte in SOFC

Cobalt–free Perovskite Cathode BaFe0.9Nb0.1O3– for Intermediate–temperature Solid Oxide Fuel Cell

Performance and reaction process of Ba1−xCo0.7Fe0.2Nb0.1O3-δ cathode for intermediate-temperature solid oxide fuel cell

Application of Ba0.5Sr0.5FeO3−δ-NdMnO3−δ Composite Cathode in Proton-Conducting Solid Oxide Fuel Cells

Stability, compatibility and performance improvement of SrCo0.8Fe0.1Nb0.1O3−δ perovskite as a cathode for intermediate-temperature solid oxide fuel cells

Ni-doped BaFeO3−δ perovskite oxide as highly active cathode electrocatalyst for intermediate-temperature solid oxide fuel cells

Nickel-doped BaCo0.4Fe0.4Zr0.1Y0.1O3-δ As a New High-Performance Cathode for Both Oxygen-Ion and Proton Conducting Fuel Cells