A Prussian blue analogue as a long-life cathode for liquid-state and solid-state sodium-ion batteries

Tianbei Huang,Guangyuan Du,Yuruo Qi,Jie Li,Wei Zhong,Qiuju Yang,Xuan Zhang,Maowen Xu

DOI: https://doi.org/10.1039/d0qi00872a

IF: 7.779

2020-01-01

Inorganic Chemistry Frontiers

Abstract:A facile wet-chemical method for synthesizing a nano-sized NiFe-PBA compound with excellent electrochemical performance.

chemistry, inorganic & nuclear

What problem does this paper attempt to address?

Achieving Long-Life Prussian Blue Analogue Cathode for Na-ion Batteries Via Triple-Cation Lattice Substitution and Coordinated Water Capture

Bingxing Xie,Pengjian Zuo,Liguang Wang,Jiajun Wang,Hua Huo,Mengxue He,Jie Shu,Haifeng Li,Shuaifeng Lou,Geping Yin

DOI: https://doi.org/10.1016/j.nanoen.2019.04.059

IF: 17.6

2019-01-01

Nano Energy

Abstract:Prussian blue and its analogues have attracted tremendous interests as cathode materials for sodium ion batteries because of their low cost and high capacity. However, their commercial applications are hindered by low capacity utilization and insufficient cycle life. Here, we report on a MnCoNi-co-doped Prussian blue analogue with high purity and crystallinity by a citrate-assisted controlled crystallization process. Moreover, a novel strategy of in situ capturing for residual coordinated water during sodiation/desodiation process is proposed to achieve a high cyclability by using the aluminium chloride Lewis acid as electrolyte additive. The reversible cubic-rhombohedral phase transition is revealed by in situ X-ray diffraction, ex situ X-ray absorption spectroscopy and transient electrochemical impedance spectroscopy. The MnCoNi-co-doped composite delivers a capacity of 111 mAh g(-1) even at 1C and retains a capacity retention of 78.7% after 1500 cycles for sodium ion batteries. This work provides important insights on eliminating the parasitical coordinated water in lattice and modulating the crystallinity to develop high-performance Prussian blue and its analogues.
A Dual-Insertion Type Sodium-Ion Full Cell Based on High-Quality Ternary-Metal Prussian Blue Analogs

Jian Peng,Jinsong Wang,Haocong Yi,WenJing Hu,Yonghui Yu,Jinwen Yin,Yi Shen,Yi Liu,Jiahuan Luo,Yue Xu,Peng Wei,Yuyu Li,Yu Jin,Yu Ding,Ling Miao,Jianjun Jiang,Jiantao Han,Yunhui Huang

DOI: https://doi.org/10.1002/aenm.201702856

IF: 27.8

2018-01-01

Advanced Energy Materials

Abstract:Prussian blue analogs (PBAs) are especially investigated as superior cathodes for sodium-ion batteries (SIBs) due to high theoretical capacity (approximate to 170 mA h g(-1)) with 2-Na storage and low cost. However, PBAs suffer poor cyclability due to irreversible phase transition in deep charge/discharge states. PBAs also suffer low crystallinity, with considerable [Fe(CN)(6)] vacancies, and coordinated water in crystal frameworks. Presently, a new chelating agent/surfactant coassisted crystallization method is developed to prepare high-quality (HQ) ternary-metal NixCo1-x[Fe(CN)(6)] PBAs. By introducing inactive metal Ni to suppress capacity fading caused by excessive lattice distortion, these PBAs have tunable limits on depth of charge/discharge. HQ-NixCo1-x[Fe(CN)(6)] (x = 0.3) demonstrates the best reversible Na-storage behavior with a specific capacity of approximate to 145 mA h g(-1) and a remarkably improved cycle performance, with approximate to 90% capacity retention over 600 cycles at 5 C. Furthermore, a dual-insertion full cell on the cathode and NaTi2(PO4)(3) anode delivers reversible capacity of approximate to 110 mA h g(-1) at a current rate of 1.0 C without capacity fading over 300 cycles, showing promise as a high-performance SIB for large-scale energy-storage systems. The ultrastable cyclability achieved in the lab and explained herein is far beyond that of any previously reported PBA-based full cells.
A Dual‐Insertion Type Sodium‐Ion Full Cell Based on High‐Quality Ternary‐Metal Prussian Blue Analogs

Jian Peng,Jinsong Wang,Haiqiong Yi,Wenjing Hu,Yonghui Yu,Jinwen Yin,Yi Shen,Yi Liu,Jiahuan Luo,Yue Xu,Peng Wei,Yuyu Li,Yu Jin,Yu Ding,Miao Liu,Jianjun Jiang,Jiantao Han,Yunhui Huang

DOI: https://doi.org/10.1002/aenm.201702856

IF: 27.8

2018-01-01

Advanced Energy Materials

Abstract:Prussian blue analogs (PBAs) are especially investigated as superior cathodes for sodium‐ion batteries (SIBs) due to high theoretical capacity (≈170 mA h g−1) with 2‐Na storage and low cost. However, PBAs suffer poor cyclability due to irreversible phase transition in deep charge/discharge states. PBAs also suffer low crystallinity, with considerable [Fe(CN)6] vacancies, and coordinated water in crystal frameworks. Presently, a new chelating agent/surfactant coassisted crystallization method is developed to prepare high‐quality (HQ) ternary‐metal NixCo1−x[Fe(CN)6] PBAs. By introducing inactive metal Ni to suppress capacity fading caused by excessive lattice distortion, these PBAs have tunable limits on depth of charge/discharge. HQ‐NixCo1−x[Fe(CN)6] (x = 0.3) demonstrates the best reversible Na‐storage behavior with a specific capacity of ≈145 mA h g−1 and a remarkably improved cycle performance, with ≈90% capacity retention over 600 cycles at 5 C. Furthermore, a dual‐insertion full cell on the cathode and NaTi2(PO4)3 anode delivers reversible capacity of ≈110 mA h g−1 at a current rate of 1.0 C without capacity fading over 300 cycles, showing promise as a high‐performance SIB for large‐scale energy‐storage systems. The ultrastable cyclability achieved in the lab and explained herein is far beyond that of any previously reported PBA‐based full cells.
Multi‐metal Doped High Capacity and Stable Prussian Blue Analogue for Sodium Ion Batteries

Youhuan Zhu,Zhi Zhang,Junjie Bao,Shaohua Zeng,Wangyan Nie,Pengpeng Chen,Yifeng Zhou,Ying Xu

DOI: https://doi.org/10.1002/er.5576

IF: 4.6

2020-01-01

International Journal of Energy Research

Abstract:Prussian blue analogues (PBA) are attractive positive electrode for sodium ion batteries due to their large interstitial sites and three-dimensional porous framework. However, they often suffer from irreversible phase transition upon charging and discharging, leading to fast capacity decay. In consideration that redox couples of Co2+/Co3+, Ni2+/Ni3+ and Fe2+/Fe3+ guarantee high capacity (similar to 150 mA h g(-1)), and Cu serves as a pillar to hold the PBA framework, here we synthesized a series of Cu, Co and Ni co-doped PBA, displaying high capacity and stable cycling performance with >98% capacity retention after 50 cycles.
Ultrafast Sodium Full Batteries Derived from XFe (X = Co, Ni, Mn) Prussian Blue Analogs.

Peng Ge,Sijie Li,Honglei Shuai,Wei Xu,Ye Tian,Li Yang,Guoqiang Zou,Hongshuai Hou,Xiaobo Ji

DOI: https://doi.org/10.1002/adma.201806092

IF: 29.4

2018-01-01

Advanced Materials

Abstract:Exploring high-rate electrode materials with excellent kinetic properties is imperative for advanced sodium-storage systems. Herein, novel cubic-like X-Fe (X = Co, Ni, Mn) Prussian blue analogs (PBAs), as cathodes materials, are obtained through as-tuned ionic bonding, delivering improved crystallinity and homogeneous particles size. As expected, Ni-Fe PBAs show a capacity of 81 mAh g(-1) at 1.0 A g(-1), mainly resulting from their physical-chemical stability, fast kinetics, and "zero-strain" insertion characteristics. Considering that the combination of elements incorporated with carbon may increase the rate of ion transfer and improve the lifetime of cycling stability, they are expected to derive binary metal-selenide/nitrogen-doped carbon as anodes. Among them, binary Ni0.67Fe0.33Se2 coming from Ni-Fe PBAs shows obvious core-shell structure in a dual-carbon matrix, leading to enhanced electron interactions, electrochemical activity, and "metal-like" conductivity, which could retain an ultralong-term stability of 375 mAh g(-1) after 10 000 loops even at 10.0 A g(-1). The corresponding full-cell Ni-Fe PBAs versus Ni0.67Fe0.33Se2 deliver a remarkable Na-storage capacity of 302.2 mAh g(-1) at 1.0 A g(-1). The rational strategy is anticipated to offer more possibilities for designing advanced electrode materials used in high-performance sodium-ion batteries.
Highly Crystalline Nickel Hexacyanoferrate As a Long-Life Cathode Material for Sodium-Ion Batteries.

Ratul Rehman,Jian Peng,Haocong Yi,Yi Shen,Jinwen Yin,Chang Li,Chun Fang,Qing Li,Jiantao Han

DOI: https://doi.org/10.1039/d0ra03490h

IF: 4.036

2020-01-01

RSC Advances

Abstract:A low-speed synthesis strategy was designed to fabricate Prussian blue analog based electrode materials for high-performance rechargeable batteries.
Na-Rich Prussian White Cathodes for Long-Life Sodium-Ion Batteries

Zhilong Shen,Songhao Guo,Chunli Liu,Yunpo Sun,Zhen Chen,Jian Tu,Shuangyu Liu,Jipeng Cheng,Jian Xie,Gaoshao Cao,Xinbing Zhao

DOI: https://doi.org/10.1021/acssuschemeng.8b02758

IF: 8.4

2018-01-01

ACS Sustainable Chemistry & Engineering

Abstract:Prussian blue analogues (PBA) recently have received great interest for promising applications in low-cost sodium-ion batteries (SIBs). However, controlled synthesis of high-performance PBA is still challenging. In this work, a facile precipitation route was used to synthesize Na-rich PBAs with superior electrochemical performance. It was found that two shapes of the products, namely, small irregular particles and large cuboid particles, coexist by adding sodium citrate in the sodium hexacyanoferrate side during the synthesis. The product shows large capacity (144 mAh g(-1) under a 0.1 C rate), good rate performance (115.6 mAh g(-1) under a 1 C rate, 86.6 mAh g(-1) under a 10 C rate), and long-term cycling stability (73.4% retention after 780 cycles under a 0.5 C rate, 72.7% retention after 2100 cycles under a 1 C rate). This work offers a promising route to prepare PBA-based cathode materials for high-performance SIBs.
Sodium‐Ion Batteries: Prussian Blue Cathode Materials for Sodium‐Ion Batteries and Other Ion Batteries (adv. Energy Mater. 17/2018)

Jiangfeng Qian,Chen Wu,Yong Cao,Zhenqiang Ma,Yunhui Huang,Xinping Ai,Hongtao Yang

DOI: https://doi.org/10.1002/aenm.201870079

IF: 27.8

2018-01-01

Advanced Energy Materials

Abstract:In article number 1702619, Yunhui Huang, Hanxi Yang, and co-workers summarize the recent advances and progresses on the synthesis, structure and intercalation electrochemistry of Prussian blue analogues (PBAs) for non-aqueous and aqueous sodium ion batteries. Additionally, the development of the PBAs for the insertion of other monovalent and multivalent ions is briefly introduced, aiming at providing a new insight into the design of new host materials for next generation advanced batteries.
Prussian blue: a new framework of electrode materials for sodium batteries.

Yuhao Lu,Long Wang,Jinguang Cheng,John B Goodenough

DOI: https://doi.org/10.1039/c2cc31777j

IF: 4.9

2012-01-01

Chemical Communications

Abstract:Prussian blue and its analogues consisting of different transition-metal ions (Fe, Mn, Ni, Cu, Co and Zn) have been synthesized at room temperature. Insertion of Na into KFe2(CN)(6) in a carbonate electrolyte exhibited a reversible capacity near 100 mA h g(-1) with no capacity fade in 30 cycles. The data indicate that a Na-ion battery with a Prussian blue framework as a cathode will be feasible.
Activation of Sodium Storage Sites in Prussian Blue Analogues Via Surface Etching

Wenhao Ren,Minsheng Qin,Zixuan Zhu,Mengyu Yan,Qi Li,Lei Zhang,Dongna Liu,Liqiang Mai

DOI: https://doi.org/10.1021/acs.nanolett.7b01366

IF: 10.8

2017-01-01

Nano Letters

Abstract:Sodium-ion battery technologies are known to suffer from kinetic problems associated with the solid-state diffusion of Na+ in intercalation electrodes, which results in suppressed specific capacity and degraded rate performance. Here, a controllable selective etching approach is developed for the synthesis of Prussian blue analogue (PBA) with enhanced sodium storage activity. On the basis of time dependent experiments, a defect-induced morphological evolution mechanism from nanocube to nanoflower structure is proposed. Through in situ X-ray diffraction measurement and computational analysis, this unique structure is revealed to provide higher Na+ diffusion dynamics and negligible volume change during the sodiation/desodiation processes. As a sodium ion battery cathode, the PBA exhibits a discharge capacity of 90 mA h g(-1), which is in good agreement with the complete low spin Fe-LS(C) redox reaction. It also demonstrates an outstanding rate capability of 71.0 mA h g(-1) at 44.4 C, as well as an unprecedented cycling reversibility over 5000 times.
Iron-based Prussian blue coupled with polydopamine film for advanced sodium-ion batteries

Kang-Rui Ren,Jian-Cang Wang,Shu-Hui Tian,Ning Ren,Peng-Fei Wang,Ting-Feng Yi

DOI: https://doi.org/10.1016/j.materresbull.2023.112351

IF: 5.6

2023-05-19

Materials Research Bulletin

Abstract:In this study, high-performance polydopamine (PDA) coated Na 1.33 FeFe(CN) 6 ·1·16H 2 O (PBA) cathode materials for sodium-ion batteries (SIBs) are successfully synthesized by using a single source method with Na 4 Fe(CN) 6 as sole iron source. The PDA coating does not alter the structure or morphology of the PBA sample, but greatly improves its conductivity and Na ion diffusion ability because of the good conductivity. Consequently, we observe enhanced reversible capacity, rate capability and cycle stability during cycling. Our results indicate that PBA-2 has the best electrochemical performance and sodium ion diffusion coefficient among all samples. Even at 1 C rate, PBA-2 has a high initial discharge capacity of 145 mAh g − 1 with a capacity retention of 90% over 100 cycles. The introduction of a suitable amount of PDA represents an effective strategy for enhancing the electrochemical activity of PBA for advanced SIBs. Such design strategies can be also used to modify other cathode materials for SIBs.

materials science, multidisciplinary
Modified multi-metal Prussian blue analogues toward high-performance cathode for sodium-ion battery

Thi Xuyen Nguyen,Jagabandhu Patra,Kai-Hsiang Yang,Brahmanu Wisnu Saputro,Oliver Clemens,Jeng-Kuei Chang,Jyh-Ming Ting

DOI: https://doi.org/10.1016/j.jpowsour.2024.235514

IF: 9.2

2024-09-27

Journal of Power Sources

Abstract:Increasing demand for energy storage devices coupled with lithium precursor shortage opens up a new opportunity for sodium-ion batteries (SIBs) to be considered as a replacement of lithium-ion batteries to become a new generation of energy storage device for commercial application. Prussian blue analogue (PBA) demonstrates great advantages as the cathodes for SIB owing to its simple synthesis method, inexpensive raw materials, and high theoretical specific capacity. Single phase multi-metal based PBA of Na 1.92 (Mn 0.3 Fe 0.23 Co 0.3 Ni 0.17 )[Fe(CN) 6 ] 0.88 ⋅2.16H 2 O with low contents of crystal water and [Fe(CN) 6 ] 4– defects was obtained by controlling the nucleation reaction rate via using sodium citrate as a chelating agent, and the assistance of N 2 as an antioxidant and a protective gas. The obtained PBA with high purity and high crystallinity delivers a specific capacity of 120 mAh g −1 , excellent rate capability, and impressive cycling performance with 82 % capacity retention after 1000 cycles.

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
Self-Template Synthesis of Prussian Blue Analogue Hollow Polyhedrons as Superior Sodium Storage Cathodes.

Qiuju Yang,Mao-wen Xu,Tianbei Huang,Wenting Yang,Yubin Niu

DOI: https://doi.org/10.1021/acsami.1c09678

2021-07-28

Abstract:Prussian blue and its analogues with three-dimensional frame structures have been shown to be of great importance in the research and development of sodium-ion batteries (SIBs). Herein, we develop a simple and convenient self-template method to prepare a hollow-structured Prussian blue analogue (CoFe-PBA). This structure is conducive to buffer the volume changes during ion extraction and insertion processes and shorten the ion diffusion path. When further building a thin polydopamine (PDA) coating, the synthesized CoFe-PBA@PDA exhibits a high discharge capacity of 123.1 mAh g-1 at 0.1 A g-1 with a capacity retention of 71.5% after 500 cycles. Moreover, the capacity retention of CoFe-PBA@PDA after 100 cycles is 14.3% higher than that of the two comparison samples. In addition, the reversible structure of CoFe-PBA@PDA without forming a new phase was verified by in situ X-ray diffraction. This work may provide another design idea or strategy for improving the stability of the PBA cathodes used in SIBs.

Medicine,Materials Science,Chemistry
An interface-reinforced rhombohedral Prussian blue analogue in semi-solid state electrolyte for sodium-ion battery

Bingxing Xie,Liguang Wang,Haifeng Li,Hua Huo,Can Cui,Baoyu Sun,Yulin Ma,Jiajun Wang,Geping Yin,Pengjian Zuo

DOI: https://doi.org/10.1016/j.ensm.2020.12.008

IF: 20.4

2021-04-01

Energy Storage Materials

Abstract:A semi-solid state (SSS) electrolyte with high ionic conductivity of 2.6 × 10−3 S cm−1 is designed to avoid problems of interfacial side reactions brought by typical liquid carbonate electrolyte in Prussian blue-based sodium-ion batteries, as well as Na dendrite growth. The solidification mechanism is related to FEC polymerization triggered by 5 wt% AlCl3 Lewis acid addition in pristine liquid electrolyte. The SSS electrolyte enables the intrinsic high-reversibility of rhombohedral Prussian blue analogue (r-PBA) cathode, and ultra-long lifetime of 3000 and 4000 cycles at 1 and 2 C, and high rate capacities of 121 mAh g−1 at 1 C and 88 mAh g−1 at 10 C are achieved. The improved cyclability and rate capability are ascribed to interface reinforcement between r-PBA and electrolyte due to the protection of formed poly(vinylene carbonate) on r-PBA. This work provides valuable insights into the growing significance of interface stability for rhombohedral structure in Prussian blue analogue.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Monoclinic Bimetallic Prussian Blue Analog Cathode with High Capacity and Long Life for Advanced Sodium Storage

Liuxue Shen,Yue Jiang,Yu Jiang,Junlin Ma,Kai Yang,Hongting Ma,Quanli Liu,Nan Zhu

DOI: https://doi.org/10.1021/acsami.2c03290

IF: 9.5

2022-05-23

ACS Applied Materials & Interfaces

Abstract:Prussian blue analogs (PBAs) are regarded as promising cathode materials for sodium-ion batteries (SIBs), but most of them suffer from an incompatibility between capacity and structural stability. Herein, an innovative disodium ethylenediaminetetraacetate (Na2EDTA)-assisted hydrothermal method is proposed to synthesize monoclinic Fe-substituted Ni-rich PBA (H-PBA) cathodes for Na-ion storage. The as-designed H-PBA cathode combines the merits of the low strain of a Ni-based PBA framework and the enhanced capacity of N-Fe3+/Fe2+ redox sites. It can achieve superior sodium-storage performance in terms of capacity, rate capability, and cycle stability. Moreover, ex situ measurements reveal that solid solution (2.0-3.0 V) and phase-transition (3.0-4.0 V) reactions occur during the charge/discharge process to allow almost 1.5 Na+ storage in the H-PBA lattice. Meanwhile, the H-PBA//NaTi2(PO4)3@C full cell also delivers remarkable electrochemical properties. Prospectively, this work would promote the practical application of SIBs in grid-scale electric energy storage.

materials science, multidisciplinary,nanoscience & nanotechnology
Ultrafine Prussian Blue as a High‐Rate and Long‐Life Sodium Ion Battery Cathode

Wuxing Zhang,Wenzhe Gong,Min Wan,Rui Zeng,Zhixiang Rao,Shang Su,Lihong Xue,Yunhui Huang

DOI: https://doi.org/10.1002/ente.201900108

IF: 4.149

2019-01-01

Energy Technology

Abstract:Prussian blue analogs (PBAs) have attracted much attention as cathodes in sodium-ion batteries due to their stable crystalline structure, high theoretical capacities, and facile synthesis. However, PBAs synthesized by the conventional precipitation method usually have the drawbacks of poor rate performance and cycling stability. Herein, the ball-milling method is developed to prepare the ultrafine high-quality Prussian blue. Benefited from its good crystallinity and ultrafine particle size of 40 nm, the obtained Na0.9Fe[Fe(CN)(6)](0.96) exhibits an outstanding cycling stability and rate capability, which can deliver a specific capacity of 106 mAh g(-1) at 30 degrees C, maintaining 80% capacity after 500 cycles at 10 degrees C. The results show that a size effect can contribute to the enhancement of electrochemical kinetics of PBAs, and the scalable production of high-performance PBAs can be anticipated based on the ball-milling method.
Chemical Lithiation Methodology Enabled Prussian Blue As a Li-rich Cathode Material for Secondary Li-ion Batteries

Chen Wu,Jieming Hu,Hanxian Chen,Chengyi Zhang,Mingli Xu,Lin Zhuang,Xinping Ai,Jiangfeng Qian

DOI: https://doi.org/10.1016/j.ensm.2023.102803

IF: 20.4

2023-01-01

Energy Storage Materials

Abstract:Prussian blue analogues (PBAs) have been attracting intense attention owing to its two-electron storage capability and considerable cost advantage, especially in Na-ion and K-ion batteries. However, things are quite different when it comes to Li-ion batteries, because lithium-containing Li4Fe(CN)6 precursor is not commercially available and thus the traditionally prepared Li-deficient FeFe(CN)6 products fail to couple with commercial graphite anode for full cells. Herein, we put forward a potential matching principle to guide the chemical prelithiation of FeFe(CN)6 into a Li-rich LixFeFe(CN)(6) (x varies from 0 to 2) cathode. The potential matching principle was convincingly confirmed by theoretical analysis and over-lithiation experiments. Perylene-Li reagent was elaborately screened to serve as both Li+ and electron donor for controllable chemical lithiation reaction while preserving the host framework stable. Our work provided a general guiding principle and effective methodology for controllable synthesis of Prussian blue analogues in gradient lithiation depth, which could be served as a platform for in-depth, systematic and comprehensive research on the properties of PBAs materials.
Design and Construction of Prussian Blue Analogue Combined by Na2WO4 Toward High-Performance Cathode Materials for Li-ion Battery

Nan Zhang,Li-Ying Qiu,Yu -Shen Zhao,Peng-Fei Wang,Jun-Hong Zhang,Hui Chang,Ting-Feng Yi

DOI: https://doi.org/10.1016/j.apsusc.2023.157448

IF: 6.7

2023-01-01

Applied Surface Science

Abstract:Prussian blue analogues have been considered as one of hopeful cathode materials of Li-ion batteries (LIBs) because of their tunable composition, low cost and simple synthesis method, but the high volume variation and electrical resistance during cycling limit the wide application. In this work, Na1.06Fe[Fe(CN)(6)]center dot 2.8H(2)O/Na2WO4 (PBA/NW) composites with high performance are successfully synthesized by a hydrothermal route following through a simple solution dispersion approach. The Na2WO4 coating will not alter the structure and morphology of PBA sample. Na2WO4 coating improves the structure stability and Li+ insertion/extraction reversibility, and decreases the charge transfer resistance, then promotes the transfer of Li+. The PBA-NW2 indicates an outstanding reversible discharge capacity of 134.9 mAh g (-1) at 1C after 1000 cycles, but the pure PBA only performs a discharge capacity of 108 mAh g (-1). In addition, PBA-NW2 also indicates superior rate property with discharge capacity of 150.3, 145.1, 140.0, 132.5, 132.32, 105.3, 91.9 mAh g (-1) at 0.1, 0.3, 0.5, 1, 2, 5 and 10C, respectively. This work offers a facile and easy synthesis method to construct high-performance Prussian blue analogues cathode material for low-cost LIBs.
Highly crystallized Prussian blue with enhanced kinetics for highly efficient sodium storage

Mingsheng Qin, Wenhao Ren, Ruixuan Jiang, Qi Li, Xuhui Yao, Shiqi Wang, Ya You, Liqiang Mai

2021-01-13

Abstract:Prussian blue analogs (PBAs) featuring large interstitial voids and rigid structures are broadly recognized as promising cathode materials for sodium-ion batteries. Nevertheless, the conventionally prepared PBAs inevitably suffer from inferior crystallinity and lattice defects, leading to low specific capacity, poor rate capability, and unsatisfied long-term stability. As the Na+ migration within PBAs is directly dependent on the periodic lattice arrangement, it is of essential significance to improve the crystallinity of PBAs and hence ensure long-range lattice periodicity. Herein, a chemical inhibition strategy is developed to prepare a highly crystallized Prussian blue (Na2Fe4[Fe(CN)6]3), which displays an outstanding rate performance (78 mAh g–1 at 100 C) and long life-span properties (62% capacity retention after 2000 cycles) in sodium storage. Experimental results and kinetic analyses demonstrate the efficient electron …

A Prussian blue analogue as a long-life cathode for liquid-state and solid-state sodium-ion batteries

Achieving Long-Life Prussian Blue Analogue Cathode for Na-ion Batteries Via Triple-Cation Lattice Substitution and Coordinated Water Capture

A Dual-Insertion Type Sodium-Ion Full Cell Based on High-Quality Ternary-Metal Prussian Blue Analogs

A Dual‐Insertion Type Sodium‐Ion Full Cell Based on High‐Quality Ternary‐Metal Prussian Blue Analogs

Multi‐metal Doped High Capacity and Stable Prussian Blue Analogue for Sodium Ion Batteries

Ultrafast Sodium Full Batteries Derived from XFe (X = Co, Ni, Mn) Prussian Blue Analogs.

Highly Crystalline Nickel Hexacyanoferrate As a Long-Life Cathode Material for Sodium-Ion Batteries.

Na-Rich Prussian White Cathodes for Long-Life Sodium-Ion Batteries

Sodium‐Ion Batteries: Prussian Blue Cathode Materials for Sodium‐Ion Batteries and Other Ion Batteries (adv. Energy Mater. 17/2018)

Prussian blue: a new framework of electrode materials for sodium batteries.

Activation of Sodium Storage Sites in Prussian Blue Analogues Via Surface Etching

Iron-based Prussian blue coupled with polydopamine film for advanced sodium-ion batteries

Modified multi-metal Prussian blue analogues toward high-performance cathode for sodium-ion battery

Self-Template Synthesis of Prussian Blue Analogue Hollow Polyhedrons as Superior Sodium Storage Cathodes.

An interface-reinforced rhombohedral Prussian blue analogue in semi-solid state electrolyte for sodium-ion battery

Monoclinic Bimetallic Prussian Blue Analog Cathode with High Capacity and Long Life for Advanced Sodium Storage

Ultrafine Prussian Blue as a High‐Rate and Long‐Life Sodium Ion Battery Cathode

Chemical Lithiation Methodology Enabled Prussian Blue As a Li-rich Cathode Material for Secondary Li-ion Batteries

Design and Construction of Prussian Blue Analogue Combined by Na2WO4 Toward High-Performance Cathode Materials for Li-ion Battery

Highly crystallized Prussian blue with enhanced kinetics for highly efficient sodium storage