Abstract:Antibacterial effect PVA/NaCAS composite films cross‐\linked with lactic acid. In this study, Polyvinyl Alcohol (PVA)/Sodium Caseinate (NaCAS) were cross‐linked by mixing with Lactic acid (LA) in different proportions (0.5%, 1%, 2%, and 4%). Composite films were obtained from the prepared solutions using the solution casting method. The obtained composite films were appeared as slightly opaque and lightly yellowish, but mostly transparent. As the amount of LA increased, the polarized microscope surface images of the composite films became rougher. It was explained that cross‐linking occurred with the aldehyde groups (CHO) determined in the Fourier transform infrared spectroscopy (FTIR) analysis. The increasing 5% weight loss temperature of the films because of cross‐linking also increased the thermal strength. In X‐ray diffraction analysis (XRD), the 2θ peak intensity of the 2% LA‐added film, which had the highest cross‐link density, was indicated to be the lowest. It was reported that 4% and above the LA contribution rate negatively affects the physical and mechanical properties of the PVA/NaCAS matrix. The pure PVA/NaCAS film had 30.08 MPa tensile strength and 1.49% tensile strain. The film with 2% LA added showed the tensile strength value closest to the pure film with 23.89 MPa. With a 6.52% value, the film containing 2% LA showed the lowest moisture retention behavior. Pure PVA/NaCAS film, which has a hydrophilic structure with a contact angle of 57°, gained hydrophobic ability with the addition of LA. The 1% LA‐added film exhibited the highest hydrophobic behavior with a contact angle value of 99°. With the LA additive, an increase in the contact angle values of the composite films was observed between approximately 61% and 74%. In addition, the water vapor permeability (WVTR) with 582.37 g/m2 day value of pure PVA/NaCAS composite film decreased after the addition of LA. It was degraded to 322.72 g/m2 day WVTR value in the 1% LA‐added film. 100% antibacterial activity against both E. coli and S. aureus was observed in composite films containing 1% or more LA additive. The resulting films were suggested to be used as active food packaging with antibacterial effects. Highlights LA can be used as a crosslinking agent for PVA/NaCAS blends. 2% LA contribution has shown the highest cross‐linking density. 4% LA and higher LA contribution would negatively affect the mechanical properties of the matrix. High antibacterial activity was obtained against both E. coli and S. aureus in films containing 1% or more LA.

Fabrication and physicochemical assessment of L-Histidine cross-linked PVA/CMC bio-composite membranes for antibacterial and food-packaging applications

High-performance films fabricated by food protein nanofibrils loaded with vanillin: Mechanism, characterization and bacteriostatic effect

Antimicrobial property and microstructure of micro-emulsion edible composite films against Listeria

Fabrication of PVA polymer films with improved antibacterial activity by fine-tuning via organic acids for food packaging applications

Fabrication of antibacterial food packaging from polyvinyl alcohol/sodium caseinate composite films cross‐linked with lactic acid

Development of PVA/sodium alginate incorporated with histidine capped silver nanoparticles for food packaging application

Development of anti-bacterial adhesion and antibacterial sulfobetaines modified chitosan/polyvinyl alcohol composite films as packaging materials

Preparation and characterization of N-isopropyl acrylamide grafted polyvinyl alcohol and chitosan blend films with hydrophobic and antibacterial properties

Antimicrobial food packaging composite films prepared from hemicellulose/polyvinyl alcohol/potassium cinnamate blends

Preparation of pectin/carboxymethyl cellulose composite films via high-pressure processing and enhancement of antimicrobial packaging

Preparation and characterization of carboxymethyl chitosan/polyvinyl alcohol composite hydrogel with improved mechanical and antibacterial properties

Synthesis of Poly(maleic Anhydride-Co-vinyl Chloride) Crosslinked Microspheres and Its Superior Enhancement in Mechanical Strength and Antibacterial Activity for Poly(vinyl Alcohol) Composite Films

Improved Hydrophobic, UV Barrier and Antibacterial Properties of Multifunctional PVA Nanocomposite Films Reinforced with Modified Lignin Contained Cellulose Nanofibers

Preparation and Antimicrobial Properties of Pva/Tannin Blend Films

Fabrication and evaluation of melamine-formaldehyde resin crosslinked PVA composite coating membranes with enhanced oxygen barrier properties for food packaging

Effect of adding nano-materials on the properties of hydroxypropyl methylcellulose (HPMC) edible films

Novel Hyperbranched Dialdehyde Carboxymethyl Cellulose-Grafted Gelatin Films as Potential Natural Antibacterial Materials

Fabrication of antimicrobial packaging based on polyaminopropyl biguanide incorporated pectin/polyvinyl alcohol films for fruit preservation

Development of biocompatible packaging material: starch/PVA-based bio-composite enhanced with hydroxypropyl methylcellulose

Facile fabrication and characterization of novel antimicrobial and antioxidant poly (3-hydroxybutyrate)/essential oil composites for potential use in active food packaging applications

Highly transparent PVA/nanolignin composite films with excellent UV shielding, antibacterial and antioxidant performance