Abstract:Mechanical energy is the most ubiquitous form of energy that can be harvested and converted into useful electrical power. For this reason, the piezoelectric energy harvesters (PEHs), with their inherent electromechanical coupling and high-power density, have been widely incorporated in many applications to generate power from ambient mechanical vibrations. However, one of the main challenges to the wider adoption of PEHs is how to optimize their design for maximum energy harvesting. In this paper, an investigation was conducted on the energy harvesting from seven piezoelectric patch shapes (differing in the number of edges) when attached to a non-deterministic laminated composite (single/double lamina) plate subjected to change in fiber orientation. The performance of the PEHs was examined through a coupled-field finite element (FE) model. The plate was simply supported, and its dynamics were randomized by attaching randomly distributed point masses on the plate surface in addition to applying randomly located time-harmonic point forces. The randomization of point masses and point force location on a thin plate produce non-deterministic response. The design optimization was performed by employing the ensemble-responses of the electrical potential developed across the electrodes of the piezoelectric patches. The results present the optimal fiber orientation and patch shape for maximum energy harvesting in the case of single and double lamina composite plates. The results show that the performance is optimal at 0° or 90° fiber orientation for single-lamina, and at 0°/0° and 0°/90° fiber orientations for double-lamina composites. For frequencies below 25 Hz, patches with a low number of edges exhibited a higher harvesting performance (triangular for single-lamina/quadrilateral for double-lamina). As for the broadband frequencies (above 25 Hz), the performance was optimal for the patches with a higher number of edges (dodecagonal for single-lamina/octagonal for double-lamina).

The investigation on structural health monitoring of aerospace structures via piezoelectric aeroelastic energy harvesting

Piezoelectric Sensing Techniques in Structural Health Monitoring: A State-of-the-Art Review

Breathing Cylindrical Piezoelectric Energy Harvesters

A Review on Applications of Piezoelectric Materials in Aerospace Industry

Multimodal piezoelectric wind energy harvester for aerospace applications

Piezoelectric Transducer-Based Structural Health Monitoring for Aircraft Applications

Performance Evaluation of a Piezoelectric Energy Harvester Based on Flag-Flutter

Investigation of Piezoelectric Energy Harvesting From Structural Vibration Induced by Rotating Machinery

Analytical Modeling and Experimental Validation of an Energy Harvesting System for the Smart Plate with an Integrated Piezo-Harvester

Piezoelectric PVDF-TrFE/ PET Energy Harvesters for Structural Health Monitoring (SHM) Applications

Energy Harvesting Technologies for Structural Health Monitoring of Airplane Components—A Review

Modeling of Nonlinear Dynamic Characteristics and Experimental Study of Piezoelectric Energy Harvesters with a Panel Type Structure

Theoretical Study of a Two-Degree-of-Freedom Piezoelectric Energy Harvester under Concurrent Aeroelastic and Base Excitation

Piezoelectric energy harvesting from hybrid vibrations

Nonlinear Analysis of Piezoelectric Energy Harvesters from Ambient and Galloping Vibrations

A Review on Mechanisms for Piezoelectric-Based Energy Harvesters

Piezoelectric Energy Harvesting for Civil Engineering Applications

Geometrical Investigation of Piezoelectric Patches for Broadband Energy Harvesting in Non-Deterministic Composite Plates

Numerical and experimental investigation of an auxetic piezoelectric energy harvester with frequency self-tuning capability

Performance analysis of galloping-based piezoaeroelastic energy harvesters with different cross-section geometries