Abstract:La(OH)3-modified copper tailings were prepared, characterized, and investigated for phosphate removal from water in this study. Scanning electron microscopy (SEM) analysis showed that La(OH)3 modification made a large amount of spherical solid agglomerates appeared on the surface of the copper tailings and created many pores. Laser particle size analysis indicated that the modified copper tailings had much a smaller particle size and larger specific surface area. Fourier Transform Infrared Spectroscopy (FTIR) and X-ray fluorescence (XRF) analysis illustrated that lanthanun was successfully loaded on the copper tailings with a mass percentage of 25.31%. The adsorption kinetics and isothermal adsorption experiment results indicated that the La(OH)3-modified copper tailings had a much better phosphate adsorption capacity than the original copper tailings. The adsorption kinetics process of the La(OH)3-modified copper tailings followed the pseudo-second-order kinetic model, and the isothermal adsorption data were well fitted by the Langmuir isotherm model. The maximum phosphorus adsorption capacity of the copper tailings after alkali treatment and La(OH)3 modification increased from 737.04 mg/kg to 7078.43 mg/kg, which was close to that of Phoslock. Leaching toxicity testing demonstrated that the use of La(OH)3-modified copper tailings for phosphorus removal in water treatment would not cause secondary pollution. Adsorption mechanism analysis revealed that both electrostatic attraction and ligand exchange were involved in phosphate adsorption onto La(OH)3-modified copper tailings. The phosphate adsorption of La(OH)3-modified copper tailings was pH-dependent, and a high-pH environment resulted in a decline in adsorption capacity. The increased concentration of OH− in high-pH solution was unfavorable for ligand exchange between phosphate species and hydroxyl groups from La(OH)2 species. In addition, competitive adsorption between HPO42− and the increased amounts of OH− weakened electrostatic attraction. The results suggested that La(OH)3-modified copper tailings are promising adsorbents for highly efficient phosphate removal and provide a new method to realize the resource utilization of copper tailings.

The preparation of calcium phosphate adsorbent from natural calcium resource and its application for copper ion removal

Alkali-Treated Yttrium-Containing Chitosan-Based Hydrogel Beads for Phosphate Removal from Aqueous Solutions

Preparation of Porous Hydroxyapatite Using Cetyl Trimethyl Ammonium Bromide as Surfactant for the Removal of Lead Ions from Aquatic Solutions

Adsorption of Pb (II) Ions onto Hydroxyapatite Nanopowders in Aqueous Solutions

Multipurpose Polysaccharide-based composite hydrogel with magnetic and thermoresponsive properties for phosphorus and enhanced copper (II) removal

Synthesis of Rod-Like Hydroxyapatite with High Surface Area and Pore Volume from Eggshells for Effective Adsorption of Aqueous Pb(II)

Comparative Study of Cu Ion Adsorption by Nano-Hydroxyapatite Powder Synthesized from Chemical Reagents and Clam Shell-Derived Calcium Sources

Natural hydroxyapatite powder from pig-bone waste (pHAP) for the rapid adsorption of heavy metals (Cu) in aqueous solution

On the removal efficiency of copper ions in wastewater using calcined waste eggshells as natural adsorbents

Phosphate Adsorption from Aqueous Solutions by Disused Adsorbents: Chitosan Hydrogel Beads after the Removal of Copper(ii)

Removal mechanism of phosphorus in water by calcium hydroxide modified copper tailings

Synthesis and Characterization of Calcium Phosphate Materials Derived from Eggshells from Different Poultry with and without the Eggshell Membrane

A Study of Adsorption Behaviour of Cu(II) on Hydroxyapatite-Coated-Limestone/Chitosan Composite

In Situ Formation of Copper Phosphate on Hydroxyapatite for Wastewater Treatment

A facile microwave-assisted synthesis of mesoporous hydroxyapatite as an efficient adsorbent for Pb2+ adsorption

Preparation of EDTA-modified Magnetic Attapulgite Chitosan Gel Bead Adsorbent for the Removal of Cu(II), Pb(II), and Ni(II).

A novel lanthanum-modified copper tailings adsorbent for phosphate removal from water

A low-cost adsorbent deriving from eggshell modified with Mg(II)-doped hydroxyapatite for removal of Cd2+ from water

Zn-doped Mono- and Biphasic Calcium Phosphate Materials Derived from Agriculture Waste and Their Potential Biomedical Applications: Part I

Innovative strategy of turning waste into treasure: High-efficiency adsorption of heavy metals pollutants by modified amorphous calcium phosphate prepared with phosphogypsum waste

Remediation of artificially contaminated soil and groundwater with copper using hydroxyapatite/calcium silicate hydrate recovered from phosphorus-rich wastewater