Abstract:Abstract Mitral regurgitation (MR) is the second most frequent indication for heart valve surgery and catheter interventions. According to European and US-American guidelines, transcatheter mitral valve repair in general and transcatheter edge-to-edge repair (TEER) in particular may be considered as a treatment option for selected high-risk patients. However, the biomechanical impact of TEERdevices on the mitral valve (MV) has not yet been fully understood. To address this problem, a 3D-Fluid-Structure Interaction (FSI) framework utilizing non-linear Finite Element Analysis (FEA) for the MV apparatus and Smoothed Particle Hydrodynamics (SPH) for the pulsatile fluid flow was developed and validated against in vitro data. An artificial MV-model (MVM) with a prolapse in the A2-P2 region and a custom-made TEER device implanted in the A2-P2 region were used for the in vitro investigations. In accordance with ISO 5910, projected mitral orifice areas (PMOA), flow rates as well as atrial and ventricular pressures were measured under pulsatile flow conditions before and after TEER device implantation. For the FSI-model, the MVM geometry was reconstructed by means of microcomputed tomography in a quasi-stress-free configuration. Quasi-static tensile test data was utilized for the development of linear- and hyperelastic material models of the chordae tendineae and leaflets, respectively. The fluid flow was modelled assuming an incompressible, homogenous Newtonian behaviour. Time-varying in vitro transmitral pressure loading was applied as a boundary condition. In vitro investigations show that TEER device implantation in the A2-P2 region effectively reduces the regurgitation fraction (RF) from 55 % to 13 %. Moreover, the comparison of experimental and numerical data yields a deviation of 2.09 % for the RF and a deviation of 0.40 % and 6.47 % for the maximum and minimum PMOA, respectively. The developed FSI-framework is in good agreement with in vitro data and is therefore applicable for the characterization of the biomechanical impact of different TEER devices under pulsatile flow conditions.

Functional Grading of a Transversely Isotropic Hyperelastic Model with Applications in Modeling Tricuspid and Mitral Valve Transition Regions

Heart Composite Material Model for Stress-Strain Analysis

An Approach for Designing Patient-Specific Prosthetic Aortic Valves Based on CTA Images Using Fluid-Structure Interaction (FSI) Method.

Simulation of Active Cardiac Dynamics with Orthotropic Hyperelastic Material Model

An Investigation of How Specimen Dimensions Affect Biaxial Mechanical Characterizations with Cellscale BioTester and Constitutive Modeling of Porcine Tricuspid Valve Leaflets

Fluid-structure interaction simulation of pathological mitral valve dynamics in a coupled mitral valve-left ventricle model

Model And Simulation Research Of Tissue Based Ct Images

Modeling of Soft Tissue Property Changes Induced by Fatigue Loading

Constitutive Modeling and Finite Element Analysis of Myxomatous Mitral Leaflet Tissue

A transverse isotropic viscoelastic constitutive model for aortic valve tissue

Effect of Micromechanical Models on Mechanical Behavior of Functionally Graded Plates Based on a Quasi-3D Hyperbolic Shear Deformation Theory

A Physics-Guided Neural Operator Learning Approach to Model Biological Tissues from Digital Image Correlation Measurements

Isogeometric Analysis of Hyperelastic Material Characteristics for Calcified Aortic Valve

The effects of leaflet material properties on the simulated function of regurgitant mitral valves

Mechanical modeling of the maturation process for tissue-engineered implants: application to biohybrid heart valves

A consistent transversely-isotropic hyper-viscoelastic model: Finite element implementation and mechanical characterization of biological tissues

Validation of a Fluid-Structure Interaction Model for the Characterization of Transcatheter Mitral Valve Repair Devices

Finite Element Analysis of Patient-Specific Mitral Valve with Mitral Regurgitation

Fluid-structure interaction modeling of compliant aortic valves using the lattice Boltzmann CFD and FEM methods

On the fractional transversely isotropic functionally graded nature of soft biological tissues

Image-Based Patient-Specific Ventricle Models with Fluid-Structure Interaction for Cardiac Function Assessment and Surgical Design Optimization.