Abstract:The heating system is an essential component of the glass molding process. It is responsible for heating the glass to an appropriate temperature, allowing it to soften and be easily molded. However, the energy consumption of the heating system becomes particularly significant in large-scale production. This study utilized G-11 glass for the simulation analysis and developed a finite element model for the thermal conduction of a 3D ultra-thin glass molding system, as well as a thermal bending model for smartwatches. Using finite element software, the heat transfer between the mold and the glass was modeled, and the temperature distribution and thermal stress under various processing conditions were predicted. The findings of the simulation, when subjected to a numerical analysis, showed that heating rate techniques significantly affect energy consumption. This study devised a total of four heating strategies. Upon comparison, optimizing with heating strategy 4, which applies an initial heating rate of 35 mJ/(mm2·s) during the initial phase (0 to 60 s) and subsequently escalates to 45 mJ/(mm2·s) during the second phase (60 to 160 s), resulted in a reduction of 4.396% in the system's thermal output and a notable decrease of 7.875% in the heating duration, respectively. Furthermore, a single-factor research method was employed to study the forming process parameters. By comparing the numerical simulation results, it was found that within the temperature range of 615–625 °C, a molding pressure of 25–35 MPa, a heating rate of 1.5–2.5 °C/s, a cooling rate of 0.5–1 °C/s, and a pulse pressure of 45–55 Hz, the influence on residual stress and shape deviation in the glass was minimal. The relative error range was within the 20% acceptable limit, according to the experimental validation, which offered crucial direction and ideas for process development.

Implementing Photosensitive Glass as a Solution in Thermal Management Applications

Design. Fabrication, and Test of an Embedded Si-Glass Microchannel Heat Sink for High-power RF Application

Substrate-blind Photonic Integration Based on High-Index Glass Materials

Solution Processing and Resist‐Free Nanoimprint Fabrication of Thin Film Chalcogenide Glass Devices: Inorganic–Organic Hybrid Photonic Integration

Glass-on-Silicon Interposer with High Heat Dissipation Capacity and Excellent RF Compatibility

A solution-processed radiative cooling glass

Integrated Flexible Chalcogenide Glass Photonic Devices

Temperature Control of Thermal Radiation from Composite Bodies

Low-Temperature Additive Manufacturing of Silica Glass Composites

A self-assembled two-dimensional thermo-functional material for radiative cooling

3D Printed High Performance Silver Mesh for Transparent Glass Heaters through Liquid Sacrificial Substrate Electric‐Field‐Driven Jet

Scalable, Patternable Glass-Infiltrated Ceramic Radiative Coolers for Energy-Saving Architectural Applications

Processing Through Glass Via (TGV) Interposers for Advanced Packaging

Broadly-tunable smart glazing using an ultra-thin phase-change material

Glass-based Encapsulant Enabling SiC Power Devices to Long-Term Operate at 300 °C

3D Laser Engineering of Molten Core Optical Fibers: Toward a New Generation of Harsh Environment Sensing Devices

Thermo‐Optically Designed Scalable Photonic Films with High Thermal Conductivity for Subambient and Above‐Ambient Radiative Cooling

Transparent energy-saving windows based on broadband directional thermal emission

Approach to Fabricating High-Performance Cooler with Near-Ideal Emissive Spectrum for Above-Ambient Air Temperature Radiative Cooling

Thermal Bending Simulation and Experimental Study of 3D Ultra-Thin Glass Components for Smartwatches

Mullite photonic glasses with exceptional thermal stability for novel reflective thermal barrier coatings