Abstract:Aeroelastic effects, which affect the dynamic responses of low-rise roof structures to extreme wind conditions, are often neglected or oversimplified in current wind engineering design standards and applications. However, it is crucial to understand the details of those aeroelastic effects for performance-based wind engineering. This paper presents an isogeometric fluid–structure interaction (FSI) tool to investigate the aeroelastic effects of wind pressure distributions on roof structures under different turbulent wind conditions. A representative low-rise roof structure is simulated with an FSI model using an Arbitrary Lagrange-Eulerian-based variational multi-scale formulation coupled with isogeometric Kirchhoff-Love shells. The simulation results are compared to the quasi-steady approach and wind load provisions from ASCE 7-22. It shows that the quasi-steady approach and the design standard underestimate the pressure fluctuations, indicating the necessity of using FSI simulations to capture the aeroelastic effect for the roof of low-rise structures. This paper also studies the impacts of different roof configurations, e.g., the number of roof panels and inflow turbulent intensity, on the distribution of pressure coefficients and roof deflections. For the given mean wind speed, the mean pressure coefficient remains almost the same regardless of the turbulent intensity and roof configuration. However, the pressure fluctuation (standard deviation) varies significantly with the turbulence intensity and roof configuration. The aeroelastic effect also leads to complicated roof deflections at the crucial location having the maximum pressure coefficient. The paper first describes the mathematical details of the FSI model and simulation setup. Then, the pressure coefficients by the FSI simulation and design code are compared. Finally, the roof deflection with different inlet turbulence intensities and roof configurations are presented and discussed.

Wind loads on solar panels mounted on flat roofs: Effect of geometric scale

Revealing Aeroelastic Effects on Low-Rise Roof Structures in Turbulent Winds Via Isogeometric Fluid–structure Interaction

Numerical study of wind loads on low-rise gable-roofed building roofs——Analysis of roof pitch and height-width ratio effects

Wind Tunnel Experiment and Numerical Simulation of Wind Pressure Distribution of Large-Span Membrane Structure

Experimental study of aerodynamic loads on ground-mounted solar panel arrays: The panel spacing and inclination angle effect

Wind Loads on Solar Panels Mounted on Facade of High-Rise Residential Building

Wind Loads on Rooftop Solar Panels for a Flat-roof Cubic Building

Wind loading characteristics of solar arrays mounted on flat roofs

Field Measurement of Wind Pressure on a Large-Scale Spatial Structure and Comparison with Wind Tunnel Test Results

Effects of building parameters on wind loads on flat-roof-mounted solar arrays

NUMERICAL SIMULATION OF WIND PRESSURES ON CANTILEVER GRANDSTAND ROOFS

Numerical simulation of wind pressures on low-rise hip roofed buildings

Wind Loads on Low-Profile, Tilted, Solar Arrays Placed on Large, Flat, Low-Rise Building Roofs

Investigation of wind loading characteristics of roof-mounted solar panels on tall buildings

Wind loads on roof-mounted isolated solar panels of tall buildings through wind tunnel testing

Measurement of unsteady wind loads in a wind tunnel: Scaling of turbulence spectra

Investigation into the Effect of Rounded Building Corner on Wind Loads of Flat-Roof-mounted Solar Arrays

Wind loads on a low-rise gable roof with and without solar panels and comparison to design standards

Effects of Cornices on Wind Loads of Solar Panels Mounted on Gable Roof Building

Wind load characteristics of photovoltaic panel arrays mounted on flat roof

Wind Loads on Rooftop Solar Photovoltaic Panels Oriented with Varying Azimuth Angles: a Comprehensive Wind Tunnel Analysis