Abstract:Rising concentration of anthropogenic CO2 in the atmosphere and oceans challenges the ecological balance of Earth. The rising availability of green electricity from renewable energy resources presents a unique opportunity to remove and store CO2 as durable solid carbonates by utilizing Mg- and Ca-rich seawater and electrochemistry. Nonetheless, the design of electrochemical systems and product selectivity remain unresolved challenges in maximizing the potential of this pathway. Herein, we developed an electrochemical approach that operates sequentially in two modes to selectively precipitate magnesium hydroxide and calcium carbonate under ambient conditions. The yields of Mg(OH)2 and CaCO3 using titanium mesh electrodes at applied potentials of −2.5 V versus Ag/AgCl are as high as 87% and 90%, in the absence and presence of CO2 in the gas phase, respectively. The purities of Mg(OH)2 and CaCO3 after the two-mode electrolysis are as high as 96.8% and 96.5%, respectively. The ease of operation, absence of external chemical reagents, adaptability for resource recovery from seawater and industrial wastewater make this approach uniquely suited for modular deployment. Moreover, simulated brine and flue gas are investigated to demonstrate the adaptability of this technology for industrial application. It is found that the presence of sulfate can influence both the product purity and their associated efficiencies, due to the formation of sulfide byproduct. An electrochemical pathway is developed for brine partial desalination, resource recovery, and CO2 capture and mineralization for the selective precipitation of high-purity calcium carbonate and magnesium hydroxide. In this two-mode electrolysis, magnesium and calcium are separately recovered with efficiencies as high as 87% and 90%, respectively. This approach is a significant advance over existing pathways that do not selectively precipitate calcium carbonate and magnesium hydroxide from brine. The behavior of sulfate ions in simulated brine is also investigated. The use of industrial titanium mesh as an electrode presents an easy fabrication, effective, and durable material option for deploying this approach. The ease of operation, absence of external chemical reagents, adaptability for resource recovery from seawater and industrial wastewater, and increasing availability of low cost and low carbon electricity sourced from renewable energy resources make this approach uniquely suited for modular deployment.

Green and scalable separation and purification of carbon materials in molten salt by efficient high-temperature press filtration

Green and sustainable molten salt electrochemistry for the conversion of secondary carbon pollutants to advanced carbon materials

Highly efficient and environmental-friendly separation and purification of carbon nanotubes from molten salt via ultrasound-assisted carbonation

Efficient molten salt CO2 capture and selective electrochemical transformation processes toward carbon neutrality: advances, challenges, and prospects

Continuous Capture and Reduction of CO2 in an Electrochemical Molten-Salt System with High Efficiency

Efficient Conversion of Greenhouse Gas of CO2 into Carbon Products with Desirable Structures Via Molten Carbonates Electrolysis

Renewable and High Efficient Syngas Production from Carbon Dioxide and Water Through Solar Energy Assisted Electrolysis in Eutectic Molten Salts

Sustainable Carbons and Fuels: Recent Advances of CO<sub>2</sub> Conversion in Molten Salts

An environmental-friendly process for dissociating toxic substances and recovering valuable components from spent carbon cathode.

Recent advances in molten salt CO 2 capture and electrochemical conversion to functional carbon materials

Sustainable Carbons and Fuels: Recent Advances of CO2 Conversion in Molten Salts.

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

Efficient Caustic and Hydrogen Production Using a Pressurized Flow-Through Cathode

Structural/surficial dual regulated granular H2TiO3 lithium-ion sieves for lithium extraction from salt lake brine

Electrochemical recovery of high-purity calcium carbonate and magnesium hydroxide from brine via carbon mineralization

Low-Temperature Molten Salt Electrochemical CO2 Upcycling for Advanced Energy Materials

An Environmentally Benign and Sustainable Process for Carbon Recovery and Efficient Defluorination of Spent Carbon Cathode

An efficient and clean treatment of spent carbon cathode via fluorination roasting: Deep separation strategy for insoluble aluminosilicates

Separation and concentration of CO 2 from air using a humidity-driven molten-carbonate membrane

Reducing Carbon Contamination by Controlling CO32− Formation During Electrochemical Reduction of TiO2

Recent Advances in Molten Salt CO2 Capture and Electrochemical Conversion to Functional Carbon Materials