Improvement of velocity uniformity at outlets of vehicle shelter air duct

Jiawei Lu,Tao Wang,Liangmo Wang,Yandong Chen,Wei Chen

DOI: https://doi.org/10.1080/14484846.2020.1816751

2020-09-12

Australian Journal of Mechanical Engineering

Abstract:The flow field in the original duct was simulated using Reynolds-average Navier–Stokes methods. Grid independence test was carried out and the air velocity at four outlets was consistent with experimental data, so the accuracy of the numerical model can be guaranteed. Vortex at the inner wall of the curved duct was identified from the simulation result, and two 75° guide plates with the thickness of 1 mm were used to reduce it. The vortex was well improved and the flow path of air became more regular than the original scheme. Guide plates with gradual increasing height along the airflow direction at the straight duct were proposed to improve the uniformity. The height of the last guide plate was set to 50 mm, the same as original scheme; then, the smallest standard deviation of velocity at four outlets is achieved with the increasing ratio of 1.4.