Abstract:Magnetic adsorbents have recently been extensively investigated and applied in the field of water purification, because of their magnetic characters which are advantageous for the separation and recycle of these materials. Unfortunately, common magnetic materials are unstable and prone to dissolution in acid environment, thus limiting their practical applications in wide pH range, particularly in acidic condition. Therefore, it is highly imperative to exploit a novel magnetic adsorbent that is acid-resistant, to simplify separation process during the water purification. In present work, an acid-resistant magnetic Co/C nanocomposite was synthesized by using ZIF-67 as both template and precursor. The ZIF-67 was carbonized in an argon atmosphere at 800 °C for 1 h, and then treated with acid. Upon calcination at an appropriate temperature in inert atmosphere, the generated Co nanoparticles were uniformly wrapped by graphite layers, due to the graphitization of carbon upon the catalysis effect of Co. The formed graphite layers were able to protect the Co particles from oxidation and acid environment, thus resulting in the generation of an acid-resistant magnetic adsorbent that can be applied in a wide pH range (pH 1–13). Remarkably, the as-synthesized magnetic Co/C nanocomposite demonstrated excellent adsorption performance towards two typical organic dyes (rhodamine B and malachite green) over a wide pH range. The adsorption isotherms of rhodamine B and malachite green on Co/C nanocomposite were well fitted with the Langmuir model. Impressively, the maximum adsorption capacities towards rhodamine B and malachite green were estimated to be 400.0 and 561.8 mg g−1, respectively, far exceeding many previously reported adsorbents. Moreover, the adsorbent could be easily regenerated by washing with ethylene glycol (EG), suggesting its excellent reusability. Even after 5 cycles of reuse, no obvious capacity degradation was observed. Furthermore, practical application of the magnetic adsorbent was demonstrated by the removal of organic dyes from domestic wastewater with a superior removal efficiency of higher than 97%.

Magnetically recoverable carbon-coated iron carbide with arsenic adsorptive removal properties

Constructing Carbon-Coated Fe3O4 Hierarchical Microstructures with a Porous Structure and Their Excellent Cr(VI) Ion Removal Properties

Facile Inverse Micelle Fabrication of Magnetic Ordered Mesoporous Iron Cerium Bimetal Oxides with Excellent Performance for Arsenic Removal from Water.

Removal of As(V) by a Core-Shell Magnetic Nanoparticles Synthesized with Iron-Containing Water Treatment Residuals

Iron Oxide Supported Sulfhydryl-Functionalized Multiwalled Carbon Nanotubes for Removal of Arsenite from Aqueous Solution

One-pot, Solid-Phase Synthesis of Magnetic Multiwalled Carbon Nanotube/iron Oxide Composites and Their Application in Arsenic Removal.

Magnetic Fe3O4@CuO Nanocomposite Assembled on Graphene Oxide Sheets for the Enhanced Removal of Arsenic(iii/v) from Water

Surfactant Assisted Ce–Fe Mixed Oxide Decorated Multiwalled Carbon Nanotubes and Their Arsenic Adsorption Performance

Mesoporous Cerium Oxide-Anchored Magnetic Polyhedrons Derived from MIL-100(Fe) for Enhanced Removal of Arsenite from Aqueous Solution.

Facile Hydrothermal Synthesis of Nanostructured Hollow Iron-Cerium Alkoxides and Their Superior Arsenic Adsorption Performance.

Porous Biochar-Supported MnFe2O4 Magnetic Nanocomposite As an Excellent Adsorbent for Simultaneous and Effective Removal of Organic/inorganic Arsenic from Water

Fe3o4@C Particles Synthesized With Iron-Containing Water Treatment Residuals And Its Potential For Methylene Blue Removal

An Acid-resistant Magnetic Co/C Nanocomposite for Adsorption and Separation of Organic Contaminants from Water

One-Step Preparation of Chitosan-Based Magnetic Adsorbent and Its Application to the Adsorption of Inorganic Arsenic in Water

Efficient removal of cadmium ions from water by adsorption on a magnetic carbon aerogel

Superparamagnetic mesoporous ferrite nanocrystal clusters for efficient removal of arsenite from water

Use of Iron-Containing Mesoporous Carbon (IMC) for Arsenic Removal from Drinking Water

Application of biocompatible magnetite nanoparticles for the removal of arsenic and copper from water

Efficient sorption of As(III) from water by magnetite decorated porous carbon extracted from a biowaste material

Highly selective and ultrafast removal of cadmium and copper from water by magnetic core-shell microsphere

Low-Cost magnetic adsorbent for efficient Cu(II) removal from water