Abstract:Since ferric tetroxide (Fe3O4) has strong magnetic properties, coating amorphous silica (SiO2) with Fe3O4 nanoparticles can protect the magnetic Fe3O4 particles and form a new magnetic adsorbent with a core–shell structure and small pore size, the strong magnetic properties of which can efficiently solve the problem of the difficult separation and recovery of heavy metals from wastewater affecting present-day adsorption techniques. In this paper, SiO2-coated nanoscale Fe3O4 particles were prepared using a modified sol–gel method for the adsorption and removal of Cr(VI) at lower pollution concentrations. The adsorbent was characterized using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and a magnetic vibration sample magnetometer (VSM), and its adsorption performance was systematically investigated in terms of initial concentration, pH, and temperature. The experiments showed that the adsorption effect was optimal when the initial solution Cr(VI) was 40 mg/L. The adsorption capacity increased with a decrease in the initial solution’s pH and decreased with an increase in temperature. Furthermore, the adsorption capacity of Cr(VI) at low concentrations was much higher than that of other conventional adsorbents, the calculated unit adsorption capacity reached 13.609 mg·g−1, and the removal rate reached 64.8%. In addition, the strong magnetic nanocomposite (MS) had excellent recoverability, could achieve desorption via alkaline washing, and retained about 75% of the initial adsorption capacity after six cycles.

Constructing Carbon-Coated Fe3O4 Hierarchical Microstructures with a Porous Structure and Their Excellent Cr(VI) Ion Removal Properties

Improved Removal of Cr(VI) Using Fe 3 O 4 /C Magnetic Nanocomposites Derived from Potassium Fulvic Acid

One-step Facile Hydrothermal Synthesis of Flowerlike Ce/Fe Bimetallic Oxides for Efficient As(V) and Cr(VI) Remediation: Performance and Mechanism

Feasible Synthesis of Hierarchical Porous MgAl-borate LDHs Functionalized Fe3O4@SiO2 Magnetic Microspheres with Excellent Adsorption Performance Toward Congo Red and Cr(VI) Pollutants

A novel ternary magnetic Fe3O4/g-C3N4/Carbon layer composite for efficient removal of Cr (VI): A combined approach using both batch experiments and theoretical calculation

Self-assembled morphology-controlled hierarchical Fe3O4 @LDH for Cr(VI) removal

Β-Cyclodextrin Assisted One-Pot Synthesis of Mesoporous Magnetic Fe3O4@C and Their Excellent Performance for the Removal of Cr (VI) from Aqueous Solutions

Enhanced Cr (VI) removal by hierarchical CoFe2O4@SiO2-NH2 via reduction and electrostatic adsorption effect

Preparation and Characterization of Magnetic Fe 3 O 4 /CNT Nanoparticles by RPO Method to Enhance the Efficient Removal of Cr(VI)

Core-shell structured Fe3O4/PANI microspheres and their Cr(VI) ion removal properties

Hydrothermal synthesis of Zr-doped chitosan carbon-shell protected magnetic composites (Zr–Fe 3 O 4 @C) for stable removal of Cr(VI) from water: Enhanced adsorption and pH adaptability

Magnetic Hollow Carbon Nanospheres for Removal of Chromium Ions

Fabrication of Core@shell Structural Fe-Fe2O3@PHCP Nanochains with High Saturation Magnetization and Abundant Amino Groups for Hexavalent Chromium Adsorption and Reduction

A Hydrothermal Synthesis of Fe3O4@C Hybrid Nanoparticle and Magnetic Adsorptive Performance to Remove Heavy Metal Ions in Aqueous Solution

Synthesis of High Saturation Magnetization Superparamagnetic Fe3O4 Hollow Microspheres for Swift Chromium Removal

Monodispersed Hierarchical Aluminum/iron Oxides Composites Micro/nanoflowers for Efficient Removal of As(V) and Cr(VI) Ions from Water

Hydrothermal synthesis of porous α-Fe2O3 nanostructures for highly efficient Cr(vi) removal

In Situ Synthesis of Porous Fe3O4/C Composite Nanobelts with Tunable Magnetism, Electrical Conduction and Highly Efficient Adsorption Characteristics

Synthesis of Carbon-Coated, Porous and Water-Dispersive Fe3O4 Nanocapsules and Their Excellent Performance for Heavy Metal Removal Applications.

N-doped Porous Carbon with Magnetic Particles Formed in Situ for Enhanced Cr(VI) Removal

Application of Magnetic Nanocomposites in Water Treatment: Core–Shell Fe3O4 Material for Efficient Adsorption of Cr(VI)