Emerging Materials Methods for Renewable Energy
Qiang Zhang,Shaojun Guo
DOI: https://doi.org/10.1002/smtd.202000087
IF: 12.4
2020-01-01
Small Methods
Abstract:In 2018, 14 gigatons of oil equivalent (5.8 × 1020 J) energy was consumed worldwide. This energy consumption is always accelerated year by year to maintain the continuous growth of highly energy-intensive global economies. This growth is 2.3% and is driven by high growth in electricity and gas demand. Renewable energy can play a key role in solving this present daily consumption of fossil fuels, global energy security, and environmental pollution. Currently, energy consumption is mainly realized by energy conversion and storage processes, in which energy is physically/chemically released/stored in materials (electrode, fuels, etc.). Therefore, the novel fundamental understanding and practical techniques of renewable energy conversion, production, transport, storage, and consumption, based on emerging materials methods, are highly desirable and thus extensively studied recently. Significant achievements have been made in emerging materials methods for achieving high-performance solar cells, batteries, fuel cells, and supercapacitors, etc., which gives impetus to the rapid development of renewable energy technologies. This special issue of Small Methods, “Emerging Materials Methods for Renewable Energy”, embodies international contributions and highlights very recent progress covering the main topics of solar cells, electrocatalysis, batteries, and supercapacitors. Solar cells have been applied worldwide. In article 1900150, Kaimo Deng and Liang Li highlight recent progress on optical designs in organic–inorganic hybrid perovskite solar cells toward better device performance and wider applications. Currently, the average power conversion efficiency of perovskite solar cells has reached over 25%, and a continuous rise in this efficiency as well as a larger use of solar energy is highly expected. The electricity generated from renewable resources is in high demand to produce fuels via water splitting and CO2/N2 reduction catalysis, and then locally convert this chemical energy into electrical energy through fuel cells and metal–air batteries upon request. The energy electrocatalysis, including oxygen reduction/evolution reactions, hydrogen reduction/evolution reactions, CO2 reduction reactions, and N2 reduction reactions, have been given considerable attetion. The hydrogen fuel cell devices require very large amount of Pt-group-metal catalysts to boost the oxygen reduction reactions. Recently, emerging materials methods to achieve low-cost Pt-group-metal-free electrocatalysts from earth-abundant and easily sourced materials with very high reactivity of oxygen reduction are proposed. Herein, Shuhui Sun and co-workers presented the emerging materials strategies for catalysts toward fuel cell technology (article 2000016); Yuehe Lin and co-workers show a novel metal-organic-framework derived 2D single-atom electrocatalyst for oxygen reduction reaction in article 1900827; Shaojun Guo and co-workers report a class of Ir-based alloys with a 3D flower-like nanostructure both for hydrogen and oxygen generation in acid (article 1900129); Yang Yang and co-workers demonstrate that novel Fe2P2S6 nanocrystals on carbon paper exhibit Pt-like catalytic activity and better stability for high-efficiency water electrolysis in an actual water electrolyzer (article 1900632); Zhifeng Ren and co-workers describe the anchoring of Ru nanoparticles on (Fe, Ni)(OH)2 to boost hydrogen evolution reactivity in article 1900796; the application of free standing, self-supported electrocatalysts for CO2 reduction is reviewed by Chuanxin He and co-workers in article 1900826; and finally, atomically dispersed single site electrocatalysts is also another material method for nitrogen reduction to ammonia, which is well summarized by Gang Wu and co-workers in article 1900821. Energy storage technologies, such as lithium-ion batteries, have created a wireless and mobile world in this century. With continuous demands for safe, high-energy-density and reliable energy storage systems, various emerging material methods have been proposed based on novel electrode materials and emerging electrochemistry. For instance, oxygen defects are confirmed in propelling the redox reaction of metal oxides for supercapacitors by Xihong Lu in article 1900823, and oxygen defects have been introduced into phosphate ion-intercalated oxide compounds, rendering zinc ion storage in high capacity (article 1900868). The integration of electrodes into tminiaturized supercapacitors is another materials method to boost energy storage behavior, which is described by Young Jin Kim in article 1900824. To fully probe the role of working electrodes in a cell, recent progress on in-situ X-ray and neutron techniques are reviewed by Qi Liu and co-workers to afford the dynamic observations of working materials in article 1900223. These afford emerging paradigms to probe the working energy materials for renewable energy storage. Lithium–sulfur batteries are an emerging means to boost the reactivity of sulfur cathodes and lithium anodes through sulfur redox reactions. Herein, in article 1900467, Chenglin Yan and co-workers summarize recent advances in lithium–sulfur batteries with the aid of in situ/in operando characterizations to probe the working and degradation mechanism of lithium-sulfur batteries. The chemical confinement and full use of lithium polysulfide intermediates are reviewed by Yanglong Hou and co-workers in article 1900001; Jim Yang Lee and co-workers summarize the introduction of solid adsorbents, mediators, and catalysts for enhancing the electrochemical performance of composite sulfur cathodes in working lithium-sulfur batteries in article 1900864, while Jia-Qi Huang and co-workers creatively introduce homogeneous cobaltocene as a persistent extrinsic redox mediator to render an unprecedented growing pathway toward 3D lithium sulfide growth in article 1900344. Li-O2 batteries have the highest specific capacity but suffer severely from cycle instability. Dongliang Chao, Hongjin Fan, and co-workers propose an integrated cathode containing an amorphous MoS2 layer for boosting the energy efficiency and cycle life up to 190 cycles (article 19002784). In both lithium–sulfur and lithium–oxygen batteries, uncontrollable dendrite growth severely impedes the practical applications and induces safety issues. The synergy between lithiophilic sites and conductive scaffolds is investigated by Qiang Zhang and co-workers to achieve an effective lithium host for dendrite-free lithium anodes in article 1900177. These enable the high utilization of active materials in harsh conditions of high-rate or electrolyte-lean operations in a working battery. The energy storage devices in next-generation power plants are strongly considered for large-scale energy storage systems. Rechargeable sodium-ion batteries are emerging means for low-cost and robust energy storage. In article 1900163, Xiaodong Guo, Shulei Chou, and co-workers introduce synthesis strategies and morphology control of porous carbonaceous materials for sodium-ion batteries. The marriage of carbon with sodiated metal oxides, phosphates, and organic compounds can meet the request from various load leveling of renewable energy sources during renewable energy harvesting. This special issue in Small Methods affords an international platform to share the impressive research progress on emerging materials methods for renewable energy from international research groups. The share of renewable energy sources has been growing by nearly 26% since the end of the 2000s. The emerging material method concepts herein are expected to arouse a family of energy technology that accelerates the growth of renewable energy. Here we sincerely appreciate the editorial team of Small Methods, especially Dr. Guangchen Xu and Dr. Muxian Shen, for providing the opportunity to publish this special issue, and we would like to express our deepest gratitude to all authors, reviewers, editors, and readers for their excellent contributions to this special issue. Qiang Zhang received his bachelor's and Ph.D. degrees from Tsinghua University in 2004 and 2009, respectively. After a stay in Case Western Reserve University, USA, and Fritz Haber Institute of the Max Planck Society, Germany, he was appointed a faculty member in Tsinghua University at 2011. His current research interests are advanced energy materials, including dendrite-free lithium metal anodes, lithium sulfur batteries, and electrocatalysis, especially the structure design and full demonstration of advanced energy materials in working devices. Shaojun Guo is a professor in the Department of Materials Science and Engineering, College of Engineering, Peking University and a Fellow of the Royal Society of Chemistry (RSC). Guo holds a B.S. in materials chemistry (2005) from Jilin University and a Ph.D. in analytical chemistry (2010) from Changchun Institute of Applied Chemistry, Chinese Academy of Sciences. Before he was appointed a faculty member in Peking University in 2015, he did his postdoctoral research at Brown University (2011–2013) and was Oppenheimer Fellow at Los Alamos National Lab (2013–2015). His current research interests are nano/sub-nano/atomic materials for catalysis and energy applications.