Improved Ink-Jet-Printed CdSe Quantum Dot Light-Emitting Diodes with Minimized Hole Transport Layer Erosion
Haodong Tang,Siqi Jia,Shihao Ding,Pai Liu,Jingrui Ma,Xiangtian Xiao,Xiangwei Qu,Haochen Liu,Hongcheng Yang,Bing Xu,Wei Chen,Guangyu Li,Zoe Pikramenou,Carl Anthony,Kai Wang,Xiao Wei Sun
DOI: https://doi.org/10.1021/acsaelm.1c00210
IF: 4.494
2021-06-01
ACS Applied Electronic Materials
Abstract:Ink-jet printing is a promising deposition technology, which is capable of large-area fabrication and mask-free patterning. For ink-jet-printed quantum dot (QD) light-emitting diodes (LEDs), the QDs are commonly dissolved in a mixture of solvent and thickener ink system. However, the hole transport layer could be eroded by this QD ink, leading to a rough surface morphology and resulting in the leakage of carriers and low device performance. This phenomenon was first and directly observed by using an atomic force microscope and a cross-sectional scanning electron microscope. We, therefore, redesigned the annealing process of the hole transport layer to achieve an optimized smooth surface with a reduced number of defects for ink-jet-printed QD LEDs (QLEDs). Optimized morphology brings back a maximum luminance of over 30,000 cd/m<sup>2</sup> and an external quantum efficiency of 7.52% for the ink-jet-printed red QLEDs using CdSe QDs, which are comparable to those of the spin-coated device. Moreover, the operation lifetime of the ink-jet-printed device is also enhanced by the restored surface morphology. An enhanced <i>T</i><sub>50</sub> lifetime of the ink-jet-printed device at 1000 cd/m<sup>2</sup> is improved from 26 to 127 h, which converted to a long <i>T</i><sub>50</sub> lifetime of 8013 h, when operated at 100 cd/m<sup>2</sup>.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaelm.1c00210?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaelm.1c00210</a>.Thermal analysis including TGA and DSC; morphology analysis of TFB films including top-view SEM and 2D-AFM results; FTIR results; driving voltage of the ink-jet printer; and analysis of QD ink and device comparison (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.1c00210/suppl_file/el1c00210_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,engineering, electrical & electronic