Abstract:The Energy crisis associated with continuous depletion of fossil fuel is one of the prime concerns in the world. Henceforth, there is an increasing interest for renewable energy sources such as biofuels, as environmentally friendly alternatives for replacing fossil fuel. Among that, bioethanol is one of the most promising alternative energy sources for the limited crude oil which can be produced by biocon version of variety of feedstock. Lignocellulosic feed stock such as rice straw is one of the most abundant sources which can be used for the production of second-generation biofuel without competes with the production of food crops. However, the pretreatment of second-generation biomass is critically important to maintain higher efficient anaerobic fermentation, provides higher bioethanol yield, and also to lower the inhibition conditions for fermentation. Also, the lignin removal is significantly valuable through biomass pretreatment, to create more accessibility for enzymes and microorganisms’ fermentation process. In this study, three different chemical pretreatment methods of base treatment, Acid treatment and NH3 Soaking were investigated to identify the optimal technique for maximizing bioethanol yield. Analytical techniques such as Fourier-transform infrared spectroscopy (FTIR) was employed to characterize the structural changes in the biomass during pretreatment. The analytical technique applied to measure the separated lignin weight. The pretreated samples were centrifuged at 500 rpm for 5 minutes and collected and separated lignin content weight and measured. Then total twelve reactors were designed for the fermentation for all chemical treated samples, by adding 8g of yeast, 125 ml of water, and 0.5 g of urea. The reactors are then sealed well and kept for a five to seven days for fermentation. Finally, a rotary evaporator is used to purify the ethanol after the fermentation process. Then, the percentage of ethanol present in the purified samples is obtained by the hand-held alcohol meter. The maximum lignin precipitate separation was recorded as 12 w/w% from NaOH-treated sample, with 4 g/ml % (w/v) concentration. Furthermore, NaOH-treated sample showed the highest peaks for most of the spectrums in the FTIR analysis and showed the highest cellulose and hemicellulose content availability for bioethanol production. Such as 2910 to 2930 cm-1 region for C-H alkane stretching bonds, the absorption peak at around 1650 shows the C=0 bond related to the hemicellulose, and the 1000 to 1100 cm-1spectrum region with the maximum peak reaching around 1035 cm-1characterizes the C-O stretching in cellulose and hemicellulose structure. Finally, the comparing the ethanol yield of the samples, the highest ethanol yield is found in the NaOH pretreated rice straw sample and its ethanol yield is 8.59%(w/w). The ethanol yield of H2SO4 pretreated straw and NH3 pretreated straw was 6.53%(w/w) and 7.14%(w/w) respectively. Ultimately, the rice straw provides a great sustainable 2nd generation biomass for produce renewable bioethanol to replace the fossil fuel. The NaOH deliver an optimum chemically low concentrated pretreatment condition for bioethanol production from rice straw, with better accessibility for cellulose and hemicellulose structure with higher bioethanol yield.

Dilute Acid Pretreatment And Enzymatic Hydrolysis Of Lignocellulosic Biomass For Butanol Production As Biofuel

Pretreatment of lignocellulosic biomass from sugar bagasse under microwave assisted dilute acid hydrolysis for biobutanol production

Effect of Sodium Hydroxide Pretreatment on Physicochemical Changes and Enzymatic Hydrolysis of Herbaceous and Woody Lignocelluloses

Bioethanol Production and Dilute Acid Pretreatment of Lignocellulosic Materials: a Review

A novel integrated process to convert cellulose and hemicellulose in rice straw to biobutanol

The advanced strategy for enhancing biobutanol production and high-efficient product recovery with reduced wastewater generation

A comprehensive review of characterization, pretreatment and its applications on different lignocellulosic biomass for bioethanol production

Strategies of pretreatment of feedstocks for optimized bioethanol production: distinct and integrated approaches

Biodelignification of lignocellulose substrates: An intrinsic and sustainable pretreatment strategy for clean energy production

A review on key pretreatment approaches for lignocellulosic biomass to produce biofuel and value-added products

Exploring the Potential of Multiple Lignocellulosic Biomass As a Feedstock for Biobutanol Production

Typical conversion of lignocellulosic biomass into reducing sugars using dilute acid hydrolysis and alkaline pretreatment

Current Status and Perspectives on Biobutanol Production Using Lignocellulosic Feedstocks

Features of a Staged Acidogenic/Solventogenic Fermentation Process To Improve Butanol Production from Rice Straw

Efficient biobutanol production via co-cultivation of Clostridium acetobutylicum and Bacillus cereus utilizing DES pretreated rice husk

Enhanced Coproduction of Hydrogen and Butanol from Rice Straw by a Novel Two-Stage Fermentation Process

Pretreatment of Lignocellulosic Biomass Toward Biofuel Production

Comparative Analysis of Bioethanol Production Capacities from Different Chemically Pretreated Rice Straws

Lignocellulosic Biomass for Bioethanol: Insight into the Advanced Pretreatment and Fermentation Approaches

The conversion of lignocellulosic biomass to bioethanol: pretreatment technology comparison

Hydrolytic and Pyrolytic Technologies of Pretreatment Lignocellulose for Production of Ethanol Fuels – A Comparative Review