Abstract:Utilizing solid waste to produce foam material has become a significant direction in resource recycling. This study focuses solely on using silicomanganese slag and feldspar tailings as raw materials, utilizing a powder sintering process to produce autocatalytic foaming glass–ceramic foam. We formulated four mix ratios based on the compositional characteristics of the silicomanganese slag and feldspar tailings. The study then explored the evolution of phase formation and macroscopic pore morphology under varying preparation temperatures. Moreover, through multi-phase co-melting experiments, this work unveiled the high-temperature molten mass generation mechanism between silicomanganese slag and feldspar tailings. Our findings reveal that the glass melt generated from silicomanganese slag particles and the 'solid–liquid erosion behavior' of feldspar particles play pivotal roles in the formation of high-temperature co-melt substances. As the sintering temperature increases, the mixed powder exhibits three different states of high-temperature molten mass, which are the reasons for the evolution of the macroscopic pore structure. It is suggested that the addition of silicomanganese slag should be less than 50 %, and the heat treatment temperature should be below 1145 °C in preparing glass–ceramic foam with silicomanganese slag and feldspar tailings. The sample with 40 % silicomanganese slag and 60 % feldspar tailings, treated at 1140 °C, yielded glass–ceramic foam with a compressive strength of 1.68 MPa, apparent density of 0.279 g/cm 3 , porosity of 81.7 %, and thermal conductivity of 0.074 W·m −1 ·K −1 . In summary, this study provides a novel approach for the high-value utilization of silicomanganese slag and offers an economical route for developing lightweight, eco-friendly structural materials.

Preparation and physical properties of foamed ceramics from shale residue

Preparation of foam ceramics from solid wastes: a study on the relationship between firing regime and properties by grey system theory

Preparation of Fly Ash-Based Porous Ceramic with Alumina as the Pore-Forming Agent

Preparation and characterization of foam ceramics from red mud and fly ash using sodium silicate as foaming agent

A new mullite foamed ceramic prepared by direct-foaming methods in parallel with a mechanical activation technique

Preparation and properties of low-temperature self-expanding foamed ceramics utilizing lepidolite mica ore and ceramic tile polishing waste

Foam-gelcasting preparation and properties of high-strength mullite porous ceramics

Effect of phase evolution and pyroplastic formation behavior on glass-ceramic foam derived from silicomanganese slag and feldspar tailings

Effects of Foaming Agent on Microstructure and Properties of Porous Mullite Ceramics

Preparation and characterization of ceramic foams mainly containing extracted titanium residues and silica tailings

Highly Porous and Hierarchical MgAl2O4 Ceramics with Improved Pore Connectivity Prepared from Gelled Particle-Stabilized Foams

Recycling of Silicomanganese Slag and Fly Ash for Preparation of Environment-Friendly Foamed Ceramics

Preparation and characterization of SiO2–Al2O3–MgO–CaO–based ceramic foams mainly from Ca–Mg–rich molybdenum tailings

Preparation of Thermal Insulation Ceramics Using Felsic Tailings as Main Raw Material and Soda-ash Dregs as Flux

Study on Preparation of Ceramsite from Shale Slag and Its Application

Preparation of Foamed Ceramics from Graphite Tailings Using A Self-Foaming Method

Synthesis and properties of foam glass-ceramics from granite tailings by using SiC and MnO2 as the mixed foaming agent

Preparation of ceramic foams from ceramic tile polishing waste and fly ash without added foaming agent

Low sintering shrinkage and high strength of porous mullite–zirconia ceramics: Effect of AlF3 and ZrSi2 contents

Fabrication of foamed ceramics with enhanced compressive strength and low thermal conductivity via a simple route

Effects of magnesite addition on the properties and structure of foam ceramics